SDK13.0.04 NRF52832 experimental_bootloader_secure_serial issue

Question

hi, everyone: 
 I want to use the experimental_bootloader_secure_serial to update firmware with UART, disable the hardware flow control. 
 how to reset system when application, which document can be refered?

Rune Holmgren · Answer

For resetting the device into bootloader mode, use the function "ble_dfu_buttonless_bootloader_start_finalize" in ble_dfu.c. A call to this function is the final step in handling the buttonless operation on the BLE implementation. You should probably copy only this one function over, since the rest of the file is BLE specific. 
 To run the serial DFU bootloader without hardware flow control, you will need to run it at a very low baud rate. 9600 baud seems to work for us without any issues. This will mean that updates take a bit longer, but if you do not have the extra pins for hardware flow control this is the only solution. 
 Best regards, Rune Holmgren