This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts

Reference design part numbers nRF 52832

Hi,

Is there a list of the exact part numbers for all the components used in the nRF52832 reference designs? I could only find a pretty general Bill of Materials in the reference designs.

It would be nice if I could at least order the same crystals that were used on the DK 52832.

Best,

Nick

Parents
  • Hi Nick

    Sorry for the late reply. 

    Both crystals should be good. 

    The decoupling caps are not critical, use generic parts here. For the RF section, we're normally using Murata LQP 15-series inductors. These are 0402, you might have other requirements here. As long as the tolerance is 5% or so, most parts are usually fine. 

    Here is the complete BOM for the DK:

    pca10040_bom_noca.xls

    Noca is our sub-contractor and their part number are internal. 

    bets regards,

    Ketil Aas-Johanse

Reply
  • Hi Nick

    Sorry for the late reply. 

    Both crystals should be good. 

    The decoupling caps are not critical, use generic parts here. For the RF section, we're normally using Murata LQP 15-series inductors. These are 0402, you might have other requirements here. As long as the tolerance is 5% or so, most parts are usually fine. 

    Here is the complete BOM for the DK:

    pca10040_bom_noca.xls

    Noca is our sub-contractor and their part number are internal. 

    bets regards,

    Ketil Aas-Johanse

Children
Related