NRF_ERROR_NO_MEM

[Jim]

   I am using nrf52832 to develop based on SDK14.2. I have defined a custom service. There are 7 characteristic in this service. The attribute of each characteristic is set to notify, read, write. Now I want every feature value to be in the air. A packet can transfer 240 bytes of data at a time. Now I have implemented this function in a single characteristic, but when I want to implement each feature with such a function, it will return an NRF_ERROR_NO_MEM error. Is this because of the protocol stack? Need less RAM space, how do I change settings? How big should be set to be appropriate?

[karthikeyan]

hi,

  have you look at this thread https://devzone.nordicsemi.com/f/nordic-q-a/34436/nrf_error_no_mem-during-call-to-sd_ble_uuid_vs_add

there is 2 solutions either one will be matching as per your problem

cheers

karthikeyan

[Hung Bui]

Hi Jim, 

 

Could you tell what exactly return NRF_ERROR_NO_MEM  ? How did you declare your characteristic ? Have you try declare it with user memory in stead of stack memory ? (attr_md.vloc  = BLE_GATTS_VLOC_USER)

[Jim]

Instead of returning NRF_ERROR_NO_MEM when adding a custom service, it returns NRF_ERROR_NO_MEM when the subsequent service is registered. I did not declare user memory instead of stack memory.

[Hung Bui]

There is a set amount of memory dedicated for the attribute table (including the characteristic size) in the softdevice. If you exceed the size of it you will receive NRF_ERROR_NO_MEM . You can try increase the size by modifying NRF_SDH_BLE_GATTS_ATTR_TAB_SIZE in the sdk_config.h 

Make sure you reconfigure the RAM setting of the softdevice after you change that.