how to use uart to send bigdata

[miissscryy]

The computer and the 52832 are connected through a serial port. I want to send 2Kb data to my computer. But my computer can only receive 256b data. What should I do?

[Stian Røed Hafskjold]

Can you explain a little bit more about your setup please

[miissscryy]

Thank you for your answer. I'm a newbie and I hope you can read my code. I can only receive part of the data. what should I do? Thanks again!

Fullscreen 6735.main.c Download

/**
 * Copyright (c) 2016 - 2017, Nordic Semiconductor ASA
 * 
 * All rights reserved.
 * 
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:
 * 
 * 1. Redistributions of source code must retain the above copyright notice, this
 *    list of conditions and the following disclaimer.
 * 
 * 2. Redistributions in binary form, except as embedded into a Nordic
 *    Semiconductor ASA integrated circuit in a product or a software update for
 *    such product, must reproduce the above copyright notice, this list of
 *    conditions and the following disclaimer in the documentation and/or other
 *    materials provided with the distribution.
 * 
 * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
 *    contributors may be used to endorse or promote products derived from this
 *    software without specific prior written permission.
 * 
 * 4. This software, with or without modification, must only be used with a
 *    Nordic Semiconductor ASA integrated circuit.
 * 
 * 5. Any software provided in binary form under this license must not be reverse
 *    engineered, decompiled, modified and/or disassembled.
 * 
 * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
 * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
 * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 * 
 */
#include <stdio.h>
#include <stdint.h>
#include <stdbool.h>
#include "nordic_common.h"
#include "app_error.h"
#include "app_uart.h"
#include "ble_db_discovery.h"
#include "app_timer.h"
#include "app_util.h"
#include "bsp_btn_ble.h"
#include "ble.h"
#include "ble_gap.h"
#include "ble_hci.h"
#include "nrf_sdh.h"
#include "nrf_sdh_ble.h"
#include "nrf_sdh_soc.h"
#include "nrf_pwr_mgmt.h"
#include "ble_advdata.h"
#include "ble_nus_c.h"
#include "nrf_ble_gatt.h"

#include "nrf_log.h"
#include "nrf_log_ctrl.h"
#include "nrf_log_default_backends.h"
#include "app_timer.h"

#include "atcmd.h"

#include "es_battery_voltage.h"
#include "app_fifo.h"
#include "nrf_delay.h"


#define APP_BLE_CONN_CFG_TAG    1                                       /**< A tag that refers to the BLE stack configuration we set with @ref sd_ble_cfg_set. Default tag is @ref BLE_CONN_CFG_TAG_DEFAULT. */
#define APP_BLE_OBSERVER_PRIO   3                                       /**< Application's BLE observer priority. You shoulnd't need to modify this value. */

#define UART_TX_BUF_SIZE        256                                     /**< UART TX buffer size. */
#define UART_RX_BUF_SIZE        256                                     /**< UART RX buffer size. */

#define NUS_SERVICE_UUID_TYPE   BLE_UUID_TYPE_VENDOR_BEGIN              /**< UUID type for the Nordic UART Service (vendor specific). */

#define SCAN_INTERVAL           0x4000                                  /**< Determines scan interval in units of 0.625 millisecond. */
#define SCAN_WINDOW             0x4000                                /**< Determines scan window in units of 0.625 millisecond. */
#define SCAN_TIMEOUT            0x0000                                   /**< Timout when scanning. 0x0000 disables timeout. */

#define MIN_CONNECTION_INTERVAL MSEC_TO_UNITS(20, UNIT_1_25_MS)         /**< Determines minimum connection interval in millisecond. */
#define MAX_CONNECTION_INTERVAL MSEC_TO_UNITS(75, UNIT_1_25_MS)         /**< Determines maximum connection interval in millisecond. */
#define SLAVE_LATENCY           0                                       /**< Determines slave latency in counts of connection events. */
#define SUPERVISION_TIMEOUT     MSEC_TO_UNITS(4000, UNIT_10_MS)         /**< Determines supervision time-out in units of 10 millisecond. */

#define UUID16_SIZE             2                                       /**< Size of 16 bit UUID */
#define UUID32_SIZE             4                                       /**< Size of 32 bit UUID */
#define UUID128_SIZE            16                                      /**< Size of 128 bit UUID */

#define ECHOBACK_BLE_UART_DATA  1                                       /**< Echo the UART data that is received over the Nordic UART Service back to the sender. */

#define SCAN_RES_MAX			300

BLE_NUS_C_DEF(m_ble_nus_c);                                             /**< BLE NUS service client instance. */
NRF_BLE_GATT_DEF(m_gatt);                                               /**< GATT module instance. */
BLE_DB_DISCOVERY_DEF(m_db_disc);                                        /**< DB discovery module instance. */

static uint16_t m_ble_nus_max_data_len = BLE_GATT_ATT_MTU_DEFAULT - OPCODE_LENGTH - HANDLE_LENGTH; /**< Maximum length of data (in bytes) that can be transmitted to the peer by the Nordic UART service module. */


APP_TIMER_DEF(m_scan_timer_id1);
APP_TIMER_DEF(m_scan_timer_id2);

uint8_t num = 0;		
bool isScanning = false; 
uint16_t scanTime1 = 2000;


#define SCAN_TIMER_INTERVAL1            APP_TIMER_TICKS(scanTime1)
#define SCAN_TIMER_WINDOW            APP_TIMER_TICKS(3000)

void printfScan(void);

app_uart_comm_params_t const comm_params =
{
	.rx_pin_no    = RX_PIN_NUMBER,
	.tx_pin_no    = TX_PIN_NUMBER,
	.rts_pin_no   = RTS_PIN_NUMBER,
	.cts_pin_no   = CTS_PIN_NUMBER,
	.flow_control = APP_UART_FLOW_CONTROL_DISABLED,
	.use_parity   = false,
	.baud_rate    = UART_BAUDRATE_BAUDRATE_Baud9600
};

typedef struct Data
{
	char      name[20];
	char      mac[12];
	char      rssi;
	int 	  major;
	int      minor;
}Data;

Data scanData[SCAN_RES_MAX];
/**@brief Connection parameters requested for connection. */
static ble_gap_conn_params_t const m_connection_param1 =
{
    (uint16_t)MIN_CONNECTION_INTERVAL,  // Minimum connection
    (uint16_t)MAX_CONNECTION_INTERVAL,  // Maximum connection
    (uint16_t)SLAVE_LATENCY,            // Slave latency
    (uint16_t)SUPERVISION_TIMEOUT       // Supervision time-out
};

/** @brief Parameters used when scanning. */
static ble_gap_scan_params_t const m_scan_params =
{
    .active   = 1,
    .interval = SCAN_INTERVAL,
    .window   = SCAN_WINDOW,
    .timeout  = SCAN_TIMEOUT,
    #if (NRF_SD_BLE_API_VERSION <= 2)
        .selective   = 0,
        .p_whitelist = NULL,
    #endif
    #if (NRF_SD_BLE_API_VERSION >= 3)
        .use_whitelist = 0,
    #endif
};

/**@brief NUS uuid. */
static ble_uuid_t const m_nus_uuid =
{
    .uuid = BLE_UUID_NUS_SERVICE,
    .type = NUS_SERVICE_UUID_TYPE
};


/**@brief Function for asserts in the SoftDevice.
 *
 * @details This function will be called in case of an assert in the SoftDevice.
 *
 * @warning This handler is an example only and does not fit a final product. You need to analyze
 *          how your product is supposed to react in case of Assert.
 * @warning On assert from the SoftDevice, the system can only recover on reset.
 *
 * @param[in] line_num     Line number of the failing ASSERT call.
 * @param[in] p_file_name  File name of the failing ASSERT call.
 */
void assert_nrf_callback(uint16_t line_num, const uint8_t * p_file_name)
{
    app_error_handler(0xDEADBEEF, line_num, p_file_name);
}


/**@brief Function to start scanning. */
void scan_start(void)
{
    ret_code_t ret;
	
    ret = sd_ble_gap_scan_start(&m_scan_params);
    APP_ERROR_CHECK(ret);
	isScanning = true;
	
}


/**@brief Function for handling database discovery events.
 *
 * @details This function is callback function to handle events from the database discovery module.
 *          Depending on the UUIDs that are discovered, this function should forward the events
 *          to their respective services.
 *
 * @param[in] p_event  Pointer to the database discovery event.
 */
static void db_disc_handler(ble_db_discovery_evt_t * p_evt)
{
    ble_nus_c_on_db_disc_evt(&m_ble_nus_c, p_evt);
}


/**@brief Function for handling characters received by the Nordic UART Service.
 *
 * @details This function takes a list of characters of length data_len and prints the characters out on UART.
 *          If @ref ECHOBACK_BLE_UART_DATA is set, the data is sent back to sender.
 */
static void ble_nus_chars_received_uart_print(uint8_t * p_data, uint16_t data_len)
{
    ret_code_t ret_val;

    NRF_LOG_DEBUG("Receiving data.");
    NRF_LOG_HEXDUMP_DEBUG(p_data, data_len);

    for (uint32_t i = 0; i < data_len; i++)
    {
        do
        {
            ret_val = app_uart_put(p_data[i]);
            if ((ret_val != NRF_SUCCESS) && (ret_val != NRF_ERROR_BUSY))
            {
                NRF_LOG_ERROR("app_uart_put failed for index 0x%04x.", i);
                APP_ERROR_CHECK(ret_val);
            }
        } while (ret_val == NRF_ERROR_BUSY);
    }
    if (p_data[data_len-1] == '\r')
    {
        while (app_uart_put('\n') == NRF_ERROR_BUSY);
    }
    if (ECHOBACK_BLE_UART_DATA)
    {
        // Send data back to peripheral.
        do
        {
            ret_val = ble_nus_c_string_send(&m_ble_nus_c, p_data, data_len);
            if ((ret_val != NRF_SUCCESS) && (ret_val != NRF_ERROR_BUSY))
            {
                NRF_LOG_ERROR("Failed sending NUS message. Error 0x%x. ", ret_val);
                APP_ERROR_CHECK(ret_val);
            }
        } while (ret_val == NRF_ERROR_BUSY);
    }
}


/**@brief   Function for handling app_uart events.
 *
 * @details This function will receive a single character from the app_uart module and append it to
 *          a string. The string will be be sent over BLE when the last character received was a
 *          'new line' '\n' (hex 0x0A) or if the string has reached the maximum data length.
 */
void uart_event_handle(app_uart_evt_t * p_event)
{
    static uint8_t data_array[UART_RX_BUF_SIZE];
    static uint16_t index = 0;

    switch (p_event->evt_type)
    {
        /**@snippet [Handling data from UART] */
        case APP_UART_DATA_READY:
            UNUSED_VARIABLE(app_uart_get(&data_array[index]));
            index++;

            if ((data_array[index - 1] == '\n') )
            {
                
				if(UAart_Command(data_array) == 0)
                {
					printf("command error!\r\n");
				}
                index = 0;
            }
            break;

        /**@snippet [Handling data from UART] */
        case APP_UART_COMMUNICATION_ERROR:
            NRF_LOG_ERROR("Communication error occurred while handling UART.");
            APP_ERROR_HANDLER(p_event->data.error_communication);
            break;

        case APP_UART_FIFO_ERROR:
            NRF_LOG_ERROR("Error occurred in FIFO module used by UART.");
            APP_ERROR_HANDLER(p_event->data.error_code);
            break;

        default:
            break;
    }
}


/**@brief Callback handling NUS Client events.
 *
 * @details This function is called to notify the application of NUS client events.
 *
 * @param[in]   p_ble_nus_c   NUS Client Handle. This identifies the NUS client
 * @param[in]   p_ble_nus_evt Pointer to the NUS Client event.
 */

/**@snippet [Handling events from the ble_nus_c module] */
static void ble_nus_c_evt_handler(ble_nus_c_t * p_ble_nus_c, ble_nus_c_evt_t const * p_ble_nus_evt)
{
    ret_code_t err_code;

    switch (p_ble_nus_evt->evt_type)
    {
        case BLE_NUS_C_EVT_DISCOVERY_COMPLETE:
            NRF_LOG_INFO("Discovery complete.");
            err_code = ble_nus_c_handles_assign(p_ble_nus_c, p_ble_nus_evt->conn_handle, &p_ble_nus_evt->handles);
            APP_ERROR_CHECK(err_code);

            err_code = ble_nus_c_tx_notif_enable(p_ble_nus_c);
            APP_ERROR_CHECK(err_code);
            NRF_LOG_INFO("Connected to device with Nordic UART Service.");
            break;

        case BLE_NUS_C_EVT_NUS_TX_EVT:
            ble_nus_chars_received_uart_print(p_ble_nus_evt->p_data, p_ble_nus_evt->data_len);
            break;

        case BLE_NUS_C_EVT_DISCONNECTED:
            NRF_LOG_INFO("Disconnected.");
            scan_start();
            break;
    }
}

/**
 * @brief Function for shutdown events.
 *
 * @param[in]   event       Shutdown type.
 */
static bool shutdown_handler(nrf_pwr_mgmt_evt_t event)
{
    ret_code_t err_code;

    err_code = bsp_indication_set(BSP_INDICATE_IDLE);
    APP_ERROR_CHECK(err_code);

    switch (event)
    {
        case NRF_PWR_MGMT_EVT_PREPARE_WAKEUP:
            // Prepare wakeup buttons.
            err_code = bsp_btn_ble_sleep_mode_prepare();
            APP_ERROR_CHECK(err_code);
            break;

        default:
            break;
    }

    return true;
}

NRF_PWR_MGMT_HANDLER_REGISTER(shutdown_handler, APP_SHUTDOWN_HANDLER_PRIORITY);

/**@brief Reads an advertising report and checks if a UUID is present in the service list.
 *
 * @details The function is able to search for 16-bit, 32-bit and 128-bit service UUIDs.
 *          To see the format of a advertisement packet, see
 *          https://www.bluetooth.org/Technical/AssignedNumbers/generic_access_profile.htm
 *
 * @param[in]   p_target_uuid The UUID to search for.
 * @param[in]   p_adv_report  Pointer to the advertisement report.
 *
 * @retval      true if the UUID is present in the advertisement report. Otherwise false
 */
static bool is_uuid_present(ble_uuid_t               const * p_target_uuid,
                            ble_gap_evt_adv_report_t const * p_adv_report)
{
    ret_code_t   err_code;
    ble_uuid_t   extracted_uuid;
    uint16_t     index  = 0;
    uint8_t    * p_data = (uint8_t *)p_adv_report->data;

    while (index < p_adv_report->dlen)
    {
        uint8_t field_length = p_data[index];
        uint8_t field_type   = p_data[index + 1];

        if (   (field_type == BLE_GAP_AD_TYPE_16BIT_SERVICE_UUID_MORE_AVAILABLE)
            || (field_type == BLE_GAP_AD_TYPE_16BIT_SERVICE_UUID_COMPLETE))
        {
            for (uint32_t i = 0; i < (field_length / UUID16_SIZE); i++)
            {
                err_code = sd_ble_uuid_decode(UUID16_SIZE,
                                              &p_data[i * UUID16_SIZE + index + 2],
                                              &extracted_uuid);

                if (err_code == NRF_SUCCESS)
                {
                    if (extracted_uuid.uuid == p_target_uuid->uuid)
                    {
                        return true;
                    }
                }
            }
        }
        else if (   (field_type == BLE_GAP_AD_TYPE_32BIT_SERVICE_UUID_MORE_AVAILABLE)
                 || (field_type == BLE_GAP_AD_TYPE_32BIT_SERVICE_UUID_COMPLETE))
        {
            for (uint32_t i = 0; i < (field_length / UUID32_SIZE); i++)
            {
                err_code = sd_ble_uuid_decode(UUID32_SIZE,
                                              &p_data[i * UUID32_SIZE + index + 2],
                                              &extracted_uuid);

                if (err_code == NRF_SUCCESS)
                {
                    if (   (extracted_uuid.uuid == p_target_uuid->uuid)
                        && (extracted_uuid.type == p_target_uuid->type))
                    {
                        return true;
                    }
                }
            }
        }

        else if (   (field_type == BLE_GAP_AD_TYPE_128BIT_SERVICE_UUID_MORE_AVAILABLE)
                 || (field_type == BLE_GAP_AD_TYPE_128BIT_SERVICE_UUID_COMPLETE))
        {
            err_code = sd_ble_uuid_decode(UUID128_SIZE, &p_data[index + 2], &extracted_uuid);
            if (err_code == NRF_SUCCESS)
            {
                if (   (extracted_uuid.uuid == p_target_uuid->uuid)
                    && (extracted_uuid.type == p_target_uuid->type))
                {
                    return true;
                }
            }
        }
        index += field_length + 1;
    }
    return false;
}


/**@brief Function for handling BLE events.
 *
 * @param[in]   p_ble_evt   Bluetooth stack event.
 * @param[in]   p_context   Unused.
 */
static void ble_evt_handler(ble_evt_t const * p_ble_evt, void * p_context)
{
    ret_code_t            err_code;
    ble_gap_evt_t const * p_gap_evt = &p_ble_evt->evt.gap_evt;

    switch (p_ble_evt->header.evt_id)
    {
        case BLE_GAP_EVT_ADV_REPORT:
        {
			uint8_t index = 0;
			
			bool flag = false;
			ble_gap_evt_adv_report_t const * p_adv_report = &p_gap_evt->params.adv_report;
			if(p_adv_report->scan_rsp == 0)
			{
				for(int i = 0; i < num; i ++)
				{
					if(strcmp(scanData[i].mac,p_adv_report->peer_addr.addr) == 0)
					{
						flag = true;
						scanData[i].rssi = (uint8_t)(-p_adv_report->rssi);
						break;
					}
				}
				if(flag == false)
				{
					while(index < (p_adv_report->dlen) )
					{
					  if(((uint8_t)(p_adv_report->data[index+1])) != 0x09 )
					  {
						index = index + (p_adv_report->data[index]) + 1;
					  }
					  else
					  {
						uint8_t a = 0; 
						for(a = 0; a <  ((uint8_t)(p_adv_report->data[index]) - 1); a++)
						{
							scanData[num].name[a] = p_adv_report->data[index + 2 + a];
						}
						break;
					  }
					}
					scanData[num].rssi = (uint8_t)(-p_adv_report->rssi);
					scanData[num].major = p_adv_report->data[25]*10+p_adv_report->data[26];
					scanData[num].minor = p_adv_report->data[27]*10+p_adv_report->data[28];
					strcpy(scanData[num++].mac,p_adv_report->peer_addr.addr);
					
				}
					
			}
				
			
        }break; // BLE_GAP_EVT_ADV_REPORT

        case BLE_GAP_EVT_CONNECTED:
            NRF_LOG_INFO("Connected to target");
            err_code = ble_nus_c_handles_assign(&m_ble_nus_c, p_ble_evt->evt.gap_evt.conn_handle, NULL);
            APP_ERROR_CHECK(err_code);

            err_code = bsp_indication_set(BSP_INDICATE_CONNECTED);
            APP_ERROR_CHECK(err_code);

            // start discovery of services. The NUS Client waits for a discovery result
            err_code = ble_db_discovery_start(&m_db_disc, p_ble_evt->evt.gap_evt.conn_handle);
            APP_ERROR_CHECK(err_code);
            break;

        case BLE_GAP_EVT_TIMEOUT:
			
            if (p_gap_evt->params.timeout.src == BLE_GAP_TIMEOUT_SRC_SCAN)
            {
                NRF_LOG_INFO("Scan timed out.");
                scan_start();
            }
            else if (p_gap_evt->params.timeout.src == BLE_GAP_TIMEOUT_SRC_CONN)
            {
                NRF_LOG_INFO("Connection Request timed out.");
            }
            break;

        case BLE_GAP_EVT_SEC_PARAMS_REQUEST:
            // Pairing not supported
            err_code = sd_ble_gap_sec_params_reply(p_ble_evt->evt.gap_evt.conn_handle, BLE_GAP_SEC_STATUS_PAIRING_NOT_SUPP, NULL, NULL);
            APP_ERROR_CHECK(err_code);
            break;

        case BLE_GAP_EVT_CONN_PARAM_UPDATE_REQUEST:
            // Accepting parameters requested by peer.
            err_code = sd_ble_gap_conn_param_update(p_gap_evt->conn_handle,
                                                    &p_gap_evt->params.conn_param_update_request.conn_params);
            APP_ERROR_CHECK(err_code);
            break;

#ifndef S140
        case BLE_GAP_EVT_PHY_UPDATE_REQUEST:
        {
            NRF_LOG_DEBUG("PHY update request.");
            ble_gap_phys_t const phys =
            {
                .rx_phys = BLE_GAP_PHY_AUTO,
                .tx_phys = BLE_GAP_PHY_AUTO,
            };
            err_code = sd_ble_gap_phy_update(p_ble_evt->evt.gap_evt.conn_handle, &phys);
            APP_ERROR_CHECK(err_code);
        } break;
#endif

        case BLE_GATTC_EVT_TIMEOUT:
            // Disconnect on GATT Client timeout event.
            NRF_LOG_DEBUG("GATT Client Timeout.");
            err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gattc_evt.conn_handle,
                                             BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
            APP_ERROR_CHECK(err_code);
            break;

        case BLE_GATTS_EVT_TIMEOUT:
            // Disconnect on GATT Server timeout event.
            NRF_LOG_DEBUG("GATT Server Timeout.");
            err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gatts_evt.conn_handle,
                                             BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
            APP_ERROR_CHECK(err_code);
            break;

        default:
            break;
    }
}


/**@brief Function for initializing the BLE stack.
 *
 * @details Initializes the SoftDevice and the BLE event interrupt.
 */
static void ble_stack_init(void)
{
    ret_code_t err_code;

    err_code = nrf_sdh_enable_request();
    APP_ERROR_CHECK(err_code);

    // Configure the BLE stack using the default settings.
    // Fetch the start address of the application RAM.
    uint32_t ram_start = 0;
    err_code = nrf_sdh_ble_default_cfg_set(APP_BLE_CONN_CFG_TAG, &ram_start);
    APP_ERROR_CHECK(err_code);

    // Enable BLE stack.
    err_code = nrf_sdh_ble_enable(&ram_start);
    APP_ERROR_CHECK(err_code);

    // Register a handler for BLE events.
    NRF_SDH_BLE_OBSERVER(m_ble_observer, APP_BLE_OBSERVER_PRIO, ble_evt_handler, NULL);
}


/**@brief Function for handling events from the GATT library. */
void gatt_evt_handler(nrf_ble_gatt_t * p_gatt, nrf_ble_gatt_evt_t const * p_evt)
{
    if (p_evt->evt_id == NRF_BLE_GATT_EVT_ATT_MTU_UPDATED)
    {
        NRF_LOG_INFO("ATT MTU exchange completed.");

        m_ble_nus_max_data_len = p_evt->params.att_mtu_effective - OPCODE_LENGTH - HANDLE_LENGTH;
        NRF_LOG_INFO("Ble NUS max data length set to 0x%X(%d)", m_ble_nus_max_data_len, m_ble_nus_max_data_len);
    }
}


/**@brief Function for initializing the GATT library. */
void gatt_init(void)
{
    ret_code_t err_code;

    err_code = nrf_ble_gatt_init(&m_gatt, gatt_evt_handler);
    APP_ERROR_CHECK(err_code);

    err_code = nrf_ble_gatt_att_mtu_central_set(&m_gatt, NRF_SDH_BLE_GATT_MAX_MTU_SIZE);
    APP_ERROR_CHECK(err_code);
}


/**@brief Function for handling events from the BSP module.
 *
 * @param[in] event  Event generated by button press.
 */
void bsp_event_handler(bsp_event_t event)
{
    ret_code_t err_code;

    switch (event)
    {
        case BSP_EVENT_SLEEP:
            nrf_pwr_mgmt_shutdown(NRF_PWR_MGMT_SHUTDOWN_GOTO_SYSOFF);
            break;

        case BSP_EVENT_DISCONNECT:
            err_code = sd_ble_gap_disconnect(m_ble_nus_c.conn_handle,
                                             BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
            if (err_code != NRF_ERROR_INVALID_STATE)
            {
                APP_ERROR_CHECK(err_code);
            }
            break;

        default:
            break;
    }
}

/**@brief Function for initializing the UART. */
void uart_init(void)
{
    ret_code_t err_code;
    APP_UART_FIFO_INIT(&comm_params,
                       UART_RX_BUF_SIZE,
                       UART_TX_BUF_SIZE,
                       uart_event_handle,
                       APP_IRQ_PRIORITY_LOWEST,
                       err_code);

    APP_ERROR_CHECK(err_code);
}

/**@brief Function for initializing the NUS Client. */
static void nus_c_init(void)
{
    ret_code_t       err_code;
    ble_nus_c_init_t init;

    init.evt_handler = ble_nus_c_evt_handler;

    err_code = ble_nus_c_init(&m_ble_nus_c, &init);
    APP_ERROR_CHECK(err_code);
}


/**@brief Function for initializing buttons and leds. */
static void buttons_leds_init(void)
{
    ret_code_t err_code;
    bsp_event_t startup_event;
    err_code = bsp_init(BSP_INIT_LED, bsp_event_handler);
    APP_ERROR_CHECK(err_code);
    err_code = bsp_btn_ble_init(NULL, &startup_event);
    APP_ERROR_CHECK(err_code);
}


/**@brief Function for initializing the nrf log module. */
static void log_init(void)
{
    ret_code_t err_code = NRF_LOG_INIT(NULL);
    APP_ERROR_CHECK(err_code);

    NRF_LOG_DEFAULT_BACKENDS_INIT();
}


/**@brief Function for initializing the Power manager. */
static void power_init(void)
{
    ret_code_t err_code = nrf_pwr_mgmt_init();
    APP_ERROR_CHECK(err_code);
}


/** @brief Function for initializing the Database Discovery Module. */
static void db_discovery_init(void)
{
    ret_code_t err_code = ble_db_discovery_init(db_disc_handler);
    APP_ERROR_CHECK(err_code);
}



void Sorting()
{
	uint8_t i = 0;
	uint8_t j = 0;
	Data temp;
	for(i = 0; i < num; i ++)
	{
		for(j = i + 1; j < num; j ++)
		{
			if(scanData[i].rssi > scanData[j].rssi)
			{
				temp = scanData[i];
				scanData[i] = scanData[j];
				scanData[j] = temp;
			}
		}
	}
}

void printfScan()
{
	uint8_t i = 0;
	while(i < num)
	{
		
//		while((app_uart_getSize()>=160&&app_uart_getSize()<=256));
		printf("NUM:%d\t",i);
//		printf("Name:%s\t",scanData[i].name);
		printf("MAC:%02X%02X%02X%02X%02X%02X\t",
			scanData[i].mac[5],
			scanData[i].mac[4],
			scanData[i].mac[3],
			scanData[i].mac[2],
			scanData[i].mac[1],
			scanData[i].mac[0]
		);
		printf("major:%04X minor:%04X ",scanData[i].major,scanData[i].minor);
		printf("RSSI:-%02d\r\n",scanData[i++].rssi);
	}
	num = 0;
	memset(scanData,0,sizeof(Data)*SCAN_RES_MAX);
	
}

/*---------------------------���޸�-------------------------------------*/
void application1_timers_start(void)  
{  
    uint32_t err_code;  
    err_code = app_timer_start(m_scan_timer_id1, SCAN_TIMER_INTERVAL1, NULL);  
    APP_ERROR_CHECK(err_code);   
	
}
void application1_timers_stop(void)
{
	uint32_t err_code;  
    err_code = app_timer_stop(m_scan_timer_id1);  
    APP_ERROR_CHECK(err_code);  
}
void application2_timers_start(void)  
{  
    uint32_t err_code;  
    err_code = app_timer_start(m_scan_timer_id2, SCAN_TIMER_WINDOW, NULL);  
    APP_ERROR_CHECK(err_code);   
	isScanning = false;
}
void application2_timers_stop(void)
{
	uint32_t err_code;  
    err_code = app_timer_stop(m_scan_timer_id2);  
    APP_ERROR_CHECK(err_code);  
}


static void scan_timeout_handler1(void * p_context)
{
	sd_ble_gap_scan_stop();
	Sorting();
	isScanning = false;
	application2_timers_start();
	printfScan();
}
static void scan_timeout_handler2(void * p_context)
{
	application1_timers_start();
	scan_start();
	isScanning = true;
}
static void timer_init(void)
{
    ret_code_t err_code = app_timer_init();
    APP_ERROR_CHECK(err_code);
	err_code = app_timer_create(&m_scan_timer_id1,
                                APP_TIMER_MODE_SINGLE_SHOT,
                                scan_timeout_handler1);
    APP_ERROR_CHECK(err_code);
	err_code = app_timer_create(&m_scan_timer_id2,
                                APP_TIMER_MODE_SINGLE_SHOT,
                                scan_timeout_handler2);
    APP_ERROR_CHECK(err_code);
}
/*-----------------------------------------------------------------------*/







int main(void)
{

    log_init();
	timer_init();
    power_init();
    uart_init();
    buttons_leds_init();
    db_discovery_init();
    ble_stack_init();
	es_battery_voltage_init();
	bsp_board_leds_init();
	
	printf("------------------------------------------\r\n");
	
    for (;;)
    {
		//es_battery_voltage_get();
//		if(isScanning == false && num != 0)
//			printfScan();
        if (NRF_LOG_PROCESS() == false)
        {
            nrf_pwr_mgmt_run();
        }
    }
}