pstorage reading other values than writing

[Patriko]

Hi!

Maybe I'm doing something wrong (very possible), but for example, when I want to store array of 3 uint8_t values I use:

uint8_t dataToStore[3];
dataToStore[0] = 11;
dataToStore[1] = 22;
dataToStore[2] = 33;

retval = pstorage_store(&block_handle, dataToStore, 3 , 0);
	if (retval == NRF_SUCCESS)
	{
			// Store successfully requested. Wait for operation result.
	}
	else
	{
			// Failed to request store, take corrective action.
	}

and when I want to read it from the memory to variable I use:

   retval = pstorage_block_identifier_get(&persistant_memory_handle, 0, &block_handle);
	if (retval == NRF_SUCCESS)
	{
		uint8_t           dest_data[3];
		 //Request to read 3 bytes from block at an offset of 0 bytes.
		retval = pstorage_load(dest_data, &block_handle, 3, 0);
		if (retval == NRF_SUCCESS)
		{
                         // here dest_data should be: 11, 22, 33 but it gets different values.
		}
		else
		{
				// Failed to load, take corrective action.
		}

Received value is always different than stored. What can be the reason?

[Nikita]

Change

uint8_t dataToStore[3];

to

static uint8_t dataToStore[4] __attribute__((aligned(4)));

Static because:

pstorage_store

No copy of the data is made, and hence memory provided for data source to be written to flash cannot be freed or reused by the application until this procedure is complete. End of this procedure is notified to the application using the notification callback registered by the application.

And your buffer should be word aligned in ram.

[David Robins]

As I noted in this answer, while pstorage_store operations are queued, pstorage_load are not; they are implemented as an immediate memcpy. So it's possible to read memory before the write has completed if you don't wait for the callback notification.