spi Config register

[Saad]

Hello !

When i was trying to configur my SPI, I observed that there is a difference between the position field announced in the nrf51 reference manual v2.1 and the nRF51_bitfields :

nRF51_bitfields says : /* Register: SPI_CONFIG / / Description: Configuration register. */

/* Bit 2 : Serial clock (SCK) polarity. */ .......

/* Bit 1 : Serial clock (SCK) phase. */ .........

but the nrf51 reference manual v2.1 says the opposite :

B RW CPOL Serial clock (SCK) polarity // B => 1

C RW CPHA Serial clock (SCK) phase // C=> 2

can you please verify this and tell me whitch is correct ?

Thank you

[Stefan Birnir Sverrisson]

Sorry for the confusion. Clearly I was looking at the CONFIG register for the SPI slave, where the definition for the CPHA and CPOL bits is correct. So the conclusion is that the nRF51 Series reference manual v2.1, section 25.2.7, which describes the CONFIG register of the SPI master, is incorrect. In section 25.2.7, the CPOL bit should be bit C and CPHA should be bit B.