mesh sdk：v1.0.1
example：light_switch
The steps are as follows:
1.three devices, 2 client A and B, 1 server C
2.power on A and B, then power on C
3.which device will be configured by C, A or B?
4.Log is as follows, configuration failed
0> <t: 32>, main.c, 2236, ----- BLE Mesh Light Switch Client Demo ----- 0> <t: 40>, nrf_mesh_sdk.c, 191, Initializing softdevice 0> <t: 46>, nrf_mesh_sdk.c, 206, Initializing mesh stack 0> <t: 580>, main.c, 535, Setting up access layer and models 0> <t: 2839469>, provisioner.c, 232, Local provisioning link closed 0> <t: 2839476>, provisioner.c, 235, Provisioning failed. Retrying... 0> <t: 5343302>, provisioner.c, 232, Local provisioning link closed 0> <t: 5343309>, provisioner.c, 235, Provisioning failed. Retrying... 0> <t: 8096501>, provisioner.c, 232, Local provisioning link closed 0> <t: 8096508>, provisioner.c, 235, Provisioning failed. Retrying... 0> <t: 10435432>, provisioner.c, 277, Local provisioning link established 0> <t: 10437792>, provisioner.c, 263, Using static authentication 0> <t: 10516742>, provisioner.c, 272, Static authentication data provided 0> <t: 10529542>, main.c, 853, Provisioning complete. Adding address 0x0100. 0> <t: 10529553>, provisioner.c, 116, Getting composition data 0> <t: 10533323>, provisioner.c, 232, Local provisioning link closed 0> <t: 12495652>, main.c, 827, Configuration of device 0 failed
In the case of A and B, how to let C join one of A or B?
