nRF thread topology monitor v0.8.0-1.alpha error

[kpyush]

I am getting "Error - No response from Thread CLI device" while using nrf_TTM-linux-x64. my operating system is "ubuntu 16.4 LTS" Os type 64 bit. 

flashed firmware is: "nRF5_SDK_for_Thread_and_Zigbee_v1.0.0/examples/thread/cli/uart/pca10056/blank/armgcc$
"

please see the logs below:

13:43:48.222 Boot up Thread Topology Monitor v0.8.0-1.alpha

13:43:52.974 Serial port /dev/ttyACM0 has been successfully opened.

13:43:59.695 Successfully verified Thread CLI device.

13:43:59.698 Resetting and configuring Thread CLI device..

13:44:00.218 Successfully configured Thread CLI device. Joining to the network..

13:44:02.231 Successfully joined to the network.

13:44:21.237 Error - No response from Thread CLI device.

13:44:55.236 Error - No response from Thread CLI device.

13:45:29.237 Error - No response from Thread CLI device.

13:46:03.236 Error - No response from Thread CLI device.

13:46:37.236 Error - No response from Thread CLI device.

13:47:11.236 Error - No response from Thread CLI device.

.......

.....

[Susheel Nuguru]

This is hard to say when i cannot reproduce this in ubuntu. Can you give me more instructions on how to reproduce this.

[kpyush]

the same firmware working with widows version. I had extracted the compressed file and I found the executable there, which I was using as application.  

[Susheel Nuguru]

The latest TTM version is 0.11.0-1.alpha. Your subject says that you are testing with older version? 

Can you test the latest and see if it work with linux? If it does not, then i need to downgrade my ubuntu to test this

[kpyush]

thanks .. 0.11.0-1.alpha. is working