the hardware of NRF24 implementation

[Saif Muqdad]

Hi Dears;

        My name is Saif Muqdad, I'm an MS.c student, I'm asking if I could to get the Hardware details of NRF24 module, Hardware details like Power Amplifier class? RX/TX filter type? digital signal processing for signals and signals curves, I very need to these pieces of information in my MS.c work, this details not available in the data sheet.

thanks for reading,

BEST REGARDS. 

[ovrebekk]

Hi Saif

This is internal information unfortunately and not something that we provide. 

For regular use of the part this information would just add unnecessary detail, and for competitive reasons we have little to gain by releasing internal design details.

Wish I could be of more help... ;)

Best regards
Torbjørn

[Saif Muqdad]

hi dear,  thanks but the problem in my university they told me that i must talking about this part in my thesis .. can you help me ? 

[ovrebekk]

Hi Saif

You will just have to explain to them that this in not information that we are able to provide.
Your mentor at the university should be aware that chip manufacturers don't like to give away intimate design details about their products ;)

The nRF24L01+ is a relatively standard FSK radio, with a simple digital interface attached. If you need to base your thesis on a specific FSK implementation you would have to find one that is open sourced, so that all the design files are public. 

Best regards
Torbjørn

[Saif Muqdad]

Hi dear

O.K. thank you .. hope you all the best. ;)

have a nice day ^_^

In the end i want to very thank nordic company, by using their modules i could to make my own small job by doing a graduation projects for students, electronics like arduino, esp32, NRF24 and other really changed my life in iraq.

Thanks,

Best Regards.

[Saif Muqdad]

Dear;

Now I want to ask for something else, I am asking if I can get a job at Nordic company? I was born in 1995 and will finish my MSc study in DEC. In Iraq, even if I complete the PhD I will not get a job. In Iraq, if you want to get a job, you must have friends and acquaintances to help you to get a job, i'm worked more than 20 project using arduino, esp32 and NRF24. also I learned the CCNA 200-125. If you don't mind, can you help me to get a job in nordic company after completing my MSc study.

[Hung Bui]

Hi Saif, 

 

Torbjørn is on vacation so I try to help. I would suggest you to have a look at our positions here and send your application via the system there. We will have people go through your application and get to you if we find you would fit for us. 

We would need a little bit more than just the experience with nRF24 as we stopped development with the nRF24 series 10 years ago.