• State Verified Answer
  • Locked Locked
  • Replies 3 replies
  • Subscribers 63 subscribers
  • Views 1735 views
  • Users 0 members are here
Attachments (0)
Nordic Case Info
  • Case ID: 103706
Options
This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Howto save radio power when not needed during bond connection?

tim

How to reduce power, for bond connections such as cscs services which only requires communication once per second?

Is there a way to manually / automagically turn off the BLE radio when it is not needed. BLE communication is only required once per second?

Parents
  • 0

    Connection Parameters are the Answer

    The answers to this questions was helpful devzone.nordicsemi.com/.../

    I found the parameters which give the most efficient operation, are best determined/verified by experimentation.

    Warning. (the real problem in my case) if there are problems with the twi block you will not be able to enter low power mode.

Reply
  • 0

    Connection Parameters are the Answer

    The answers to this questions was helpful devzone.nordicsemi.com/.../

    I found the parameters which give the most efficient operation, are best determined/verified by experimentation.

    Warning. (the real problem in my case) if there are problems with the twi block you will not be able to enter low power mode.

Children
Related