• State Verified Answer
  • Locked Locked
  • Replies 3 replies
  • Subscribers 67 subscribers
  • Views 1561 views
  • Users 0 members are here
Attachments (0)
Nordic Case Info
  • Case ID: 103784
Options
This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Is it possible to change the BLE protocol using nRF8001 SDK

Kirti

I am new to Bluetooth 4.0 and want to use for a specific application. I intend to modify the Bluetooth 4.0 protocol and would need continuous transmission of packets. Is it possible to implement it using this nRF8001.

Parents
  • 0

    Continuous transmission is usually used in Direct Test Mode and the nRF8001 does support that mode of operation. See the nRF8001 Datasheet and look for direct test mode. The actual Direct Test Mode commands are documented in the Bluetooth Core specifications v4.1 Volume 6 , Part F, Section 3.3 .

    However this is intended for testing and not for normal operation.

    Is this what you are looking for ?

Reply
  • 0

    Continuous transmission is usually used in Direct Test Mode and the nRF8001 does support that mode of operation. See the nRF8001 Datasheet and look for direct test mode. The actual Direct Test Mode commands are documented in the Bluetooth Core specifications v4.1 Volume 6 , Part F, Section 3.3 .

    However this is intended for testing and not for normal operation.

    Is this what you are looking for ?

Children
No Data
Related