DFU SDK15 CRC problem.

[Mikhail]

Hi!

nRF52832, SDK15, S132.

I try to use DFU. I already implemented same DFU on a SDK13. All works correct. 

When flash SD132 and merged firmware with bootloader_setting.hex, always DFU targ started in a air.

 0> <info> app: Inside main
 0> <debug> app: In nrf_bootloader_init
 0> <debug> nrf_dfu_settings: Calling nrf_dfu_settings_init()...
 0> <debug> nrf_dfu_flash: Initializing nrf_fstorage_nvmc backend.
 0> <debug> app: Enter nrf_bootloader_fw_activate
 0> <info> app: No firmware to activate.
 0> <debug> app: Enter nrf_dfu_app_is_valid
 0> <debug> app: Return false in CRC
 0> <debug> app: DFU mode because app is not valid.
 0> <info> nrf_bootloader_wdt: WDT is not enabled
 0> <debug> app: in weak nrf_dfu_init_user
 0> <info> app_timer: RTC: initialized.
 0> <info> app: Entering DFU mode.
 0> <debug> app: Initializing transports (found: 1)
 0> <debug> nrf_dfu_ble: Initializing BLE DFU transport
 0> <debug> nrf_dfu_ble: Setting up vector table: 0x00072000
 0> <debug> nrf_dfu_ble: Enabling SoftDevice.
 0> <debug> nrf_dfu_ble: Configuring BLE stack.
 0> <debug> nrf_dfu_ble: Enabling the BLE stack.
 0> <debug> nrf_dfu_ble: No advertising name found
 0> <debug> nrf_dfu_ble: Using default advertising name
 0> <debug> nrf_dfu_ble: Advertising...
 0> <debug> nrf_dfu_ble: BLE DFU transport initialized.
 0> <debug> nrf_dfu_flash: Initializing nrf_fstorage_sd backend.
 0> <debug> app: Enter main loop

Therefore, problem in a CRC that DFU can't calculate CRC of the app.

        if (crc != s_dfu_settings.bank_0.image_crc)
        {
            // CRC does not match with what is stored.
            NRF_LOG_DEBUG("Return false in CRC");
            return  false;
        }

If I changed to return true; , all work fine.

One more time, I use same merge code for get bootloader_setting.hex in the SDK13 and it wors fine.

I use example from

https://devzone.nordicsemi.com/b/blog/posts/getting-started-with-nordics-secure-dfu-bootloader

Should make any changes for calculate CRC in the SDK15?

[Einar Thorsrud]

Hi,

Clearly the calculated CRC of the application does not match the CRC in the bootloader settings. Can you verify that you are using the exact same application .hex file when you generate the bootloader settings page using nrfutil as you actually program on the device? If the .hex file is not the same, then the CRC will not match.

[Mikhail]

I use .bat file

nrfutil pkg generate --hw-version 52 --application-version 1 --application my_app.hex --sd-req 0x98 --key-file private.key app_dfu_package.zip
nrfutil settings generate --family NRF52 --application my_app.hex --application-version 0 --bootloader-version 0 --bl-settings-version 1 bootloader_setting.hex
mergehex --merge bootloader_setting.hex nrf52832_xxaa_s132.hex my_app.hex --output boot_my_app.hex
pause

When this .bat works, it use compiled bootloader file and generate boot_my_app.hex

after that I flash via nrf go studio SD 6.0 and this boot_my_app.hex. Is it correct?

Same I made with SDK13- all works fine.

[Einar Thorsrud]

I see. All that looks good. Have you made any modifications to the bootloader? If so, which? If you are still using encryption of the DFU image you have to make adjustments for that so that you calculate the correct CRC in the bootloader.

[Mikhail]

No, I yet do not use encryption. First part I want just run project with bootloader. And tranfer management from app to bootloader. But instaed of this I have crc error and start bootloader app. 

One more time, I just try to run app with boot wo encryption.

[Einar Thorsrud]

Have you done any other changes to the bootloader? Or any other modifications at all that might be relevant? I ask because I am having problems understanding how this could happen with an unmodified bootloader provided that you have generated the bootloader settings correctly (as it seems from your previous post).

[Mikhail]

No, I haven't any modifications. Is it possible to transfer this case to private and I'll give you project and you will try it self.

[Mikhail]

only change 

dfu_public_key.c

to my key...