Hello,
I am working on Custom BLE HID Keyboard. I am currently trying to understand working of program given by nordic in SDK-10.0.0. THere is one problem which I am facing while implementing the device. Once the device is connected to the one Bluetooth peripheral it is not detected by any other peripheral device and when I disconnect the connected peripheral same problem is still present and it is not discoverable by any device. Only paired device can connect ( But iot also does not detect its presence only when I tap connect even without discovery it connects). I am providing my modified main file below.
Thank You
/* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
*
* The information contained herein is property of Nordic Semiconductor ASA.
* Terms and conditions of usage are described in detail in NORDIC
* SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
*
* Licensees are granted free, non-transferable use of the information. NO
* WARRANTY of ANY KIND is provided. This heading must NOT be removed from
* the file.
*
*/
/** @file
*
* @defgroup ble_sdk_app_hids_keyboard_main main.c
* @{
* @ingroup ble_sdk_app_hids_keyboard
* @brief HID Keyboard Sample Application main file.
*
* This file contains is the source code for a sample application using the HID, Battery and Device
* Information Services for implementing a simple keyboard functionality.
* Pressing Button 0 will send text 'hello' to the connected peer. On receiving output report,
* it toggles the state of LED 2 on the mother board based on whether or not Caps Lock is on.
* This application uses the @ref app_scheduler.
*
* Also it would accept pairing requests from any peer device.
*/
#include <stdint.h>
#include <string.h>
#include "nordic_common.h"
#include "nrf.h"
#include "nrf_assert.h"
#include "app_error.h"
#include "nrf_gpio.h"
#include "ble.h"
#include "ble_hci.h"
#include "ble_srv_common.h"
#include "ble_advertising.h"
#include "ble_advdata.h"
#include "ble_hids.h"
#include "ble_bas.h"
#include "ble_dis.h"
#include "ble_conn_params.h"
#include "bsp.h"
#include "sensorsim.h"
#include "bsp_btn_ble.h"
#include "app_scheduler.h"
#include "softdevice_handler_appsh.h"
#include "app_timer_appsh.h"
#include "device_manager.h"
#include "app_button.h"
#include "pstorage.h"
#include "app_trace.h"
#if BUTTONS_NUMBER <2
#error "Not enough resources on board"
#endif
#define IS_SRVC_CHANGED_CHARACT_PRESENT 0 /**< Include or not the service_changed characteristic. if not enabled, the server's database cannot be changed for the lifetime of the device*/
#define UART_TX_BUF_SIZE 256 /**< UART TX buffer size. */
#define UART_RX_BUF_SIZE 1 /**< UART RX buffer size. */
//#define KEY_PRESS_BUTTON_ID 0 /**< Button used as Keyboard key press. */
//#define SHIFT_BUTTON_ID 1 /**< Button used as 'SHIFT' Key. */
#define DEVICE_NAME "Wave_Nav" /**< Name of device. Will be included in the advertising data. */
#define MANUFACTURER_NAME "PrasadDait" /**< Manufacturer. Will be passed to Device Information Service. */
#define APP_TIMER_PRESCALER 0 /**< Value of the RTC1 PRESCALER register. */
#define APP_TIMER_OP_QUEUE_SIZE 4 /**< Size of timer operation queues. */
#define BATTERY_LEVEL_MEAS_INTERVAL APP_TIMER_TICKS(2000, APP_TIMER_PRESCALER) /**< Battery level measurement interval (ticks). */
#define MIN_BATTERY_LEVEL 81 /**< Minimum simulated battery level. */
#define MAX_BATTERY_LEVEL 100 /**< Maximum simulated battery level. */
#define BATTERY_LEVEL_INCREMENT 1 /**< Increment between each simulated battery level measurement. */
#define PNP_ID_VENDOR_ID_SOURCE 0x02 /**< Vendor ID Source. */
#define PNP_ID_VENDOR_ID 0x1915 /**< Vendor ID. */
#define PNP_ID_PRODUCT_ID 0xEEEE /**< Product ID. */
#define PNP_ID_PRODUCT_VERSION 0x0001 /**< Product Version. */
#define APP_ADV_FAST_INTERVAL 0x0028 /**< Fast advertising interval (in units of 0.625 ms. This value corresponds to 25 ms.). */
#define APP_ADV_SLOW_INTERVAL 0x0C80 /**< Slow advertising interval (in units of 0.625 ms. This value corrsponds to 2 seconds). */
#define APP_ADV_FAST_TIMEOUT 30 /**< The duration of the fast advertising period (in seconds). */
#define APP_ADV_SLOW_TIMEOUT 180 /**< The duration of the slow advertising period (in seconds). */
/*lint -emacro(524, MIN_CONN_INTERVAL) // Loss of precision */
#define MIN_CONN_INTERVAL MSEC_TO_UNITS(7.5, UNIT_1_25_MS) /**< Minimum connection interval (7.5 ms) */
#define MAX_CONN_INTERVAL MSEC_TO_UNITS(30, UNIT_1_25_MS) /**< Maximum connection interval (30 ms). */
#define SLAVE_LATENCY 6 /**< Slave latency. */
#define CONN_SUP_TIMEOUT MSEC_TO_UNITS(430, UNIT_10_MS) /**< Connection supervisory timeout (430 ms). */
#define FIRST_CONN_PARAMS_UPDATE_DELAY APP_TIMER_TICKS(5000, APP_TIMER_PRESCALER) /**< Time from initiating event (connect or start of notification) to first time sd_ble_gap_conn_param_update is called (5 seconds). */
#define NEXT_CONN_PARAMS_UPDATE_DELAY APP_TIMER_TICKS(30000, APP_TIMER_PRESCALER) /**< Time between each call to sd_ble_gap_conn_param_update after the first call (30 seconds). */
#define MAX_CONN_PARAMS_UPDATE_COUNT 3 /**< Number of attempts before giving up the connection parameter negotiation. */
#define SEC_PARAM_BOND 1 /**< Perform bonding. */
#define SEC_PARAM_MITM 0 /**< Man In The Middle protection not required. */
#define SEC_PARAM_IO_CAPABILITIES BLE_GAP_IO_CAPS_NONE /**< No I/O capabilities. */
#define SEC_PARAM_OOB 0 /**< Out Of Band data not available. */
#define SEC_PARAM_MIN_KEY_SIZE 7 /**< Minimum encryption key size. */
#define SEC_PARAM_MAX_KEY_SIZE 16 /**< Maximum encryption key size. */
#define OUTPUT_REPORT_INDEX 0 /**< Index of Output Report. */
#define OUTPUT_REPORT_MAX_LEN 1 /**< Maximum length of Output Report. */
#define INPUT_REPORT_KEYS_INDEX 0 /**< Index of Input Report. */
#define OUTPUT_REPORT_BIT_MASK_CAPS_LOCK 0x02 /**< CAPS LOCK bit in Output Report (based on 'LED Page (0x08)' of the Universal Serial Bus HID Usage Tables). */
#define INPUT_REP_REF_ID 0 /**< Id of reference to Keyboard Input Report. */
#define OUTPUT_REP_REF_ID 0 /**< Id of reference to Keyboard Output Report. */
#define APP_FEATURE_NOT_SUPPORTED BLE_GATT_STATUS_ATTERR_APP_BEGIN + 2 /**< Reply when unsupported features are requested. */
#define MAX_BUFFER_ENTRIES 5 /**< Number of elements that can be enqueued */
#define BASE_USB_HID_SPEC_VERSION 0x0101 /**< Version number of base USB HID Specification implemented by this application. */
#define INPUT_REPORT_KEYS_MAX_LEN 8 /**< Maximum length of the Input Report characteristic. */
#define DEAD_BEEF 0xDEADBEEF /**< Value used as error code on stack dump, can be used to identify stack location on stack unwind. */
#define SCHED_MAX_EVENT_DATA_SIZE MAX(APP_TIMER_SCHED_EVT_SIZE,\
BLE_STACK_HANDLER_SCHED_EVT_SIZE) /**< Maximum size of scheduler events. */
#define SCHED_QUEUE_SIZE 10 /**< Maximum number of events in the scheduler queue. */
#define MODIFIER_KEY_POS 0 /**< Position of the modifier byte in the Input Report. */
#define SCAN_CODE_POS 2 /**< This macro indicates the start position of the key scan code in a HID Report. As per the document titled 'Device Class Definition for Human Interface Devices (HID) V1.11, each report shall have one modifier byte followed by a reserved constant byte and then the key scan code. */
#define SHIFT_KEY_CODE 0x02 /**< Key code indicating the press of the Shift Key. */
#define MAX_KEYS_IN_ONE_REPORT (INPUT_REPORT_KEYS_MAX_LEN - SCAN_CODE_POS) /**< Maximum number of key presses that can be sent in one Input Report. */
/**Buffer queue access macros
*
* @{ */
/** Initialization of buffer list */
#define BUFFER_LIST_INIT() \
do \
{ \
buffer_list.rp = 0; \
buffer_list.wp = 0; \
buffer_list.count = 0; \
} while (0)
/** Provide status of data list is full or not */
#define BUFFER_LIST_FULL()\
((MAX_BUFFER_ENTRIES == buffer_list.count - 1) ? true : false)
/** Provides status of buffer list is empty or not */
#define BUFFER_LIST_EMPTY()\
((0 == buffer_list.count) ? true : false)
#define BUFFER_ELEMENT_INIT(i)\
do \
{ \
buffer_list.buffer[(i)].p_data = NULL; \
} while (0)
/** @} */
typedef enum
{
BLE_NO_ADV, /**< No advertising running. */
BLE_DIRECTED_ADV, /**< Direct advertising to the latest central. */
BLE_FAST_ADV_WHITELIST, /**< Advertising with whitelist. */
BLE_FAST_ADV, /**< Fast advertising running. */
BLE_SLOW_ADV, /**< Slow advertising running. */
BLE_SLEEP, /**< Go to system-off. */
} ble_advertising_mode_t;
/** Abstracts buffer element */
typedef struct hid_key_buffer
{
uint8_t data_offset; /**< Max Data that can be buffered for all entries */
uint8_t data_len; /**< Total length of data */
uint8_t * p_data; /**< Scanned key pattern */
ble_hids_t * p_instance; /**< Identifies peer and service instance */
}buffer_entry_t;
STATIC_ASSERT(sizeof(buffer_entry_t) % 4 == 0);
/** Circular buffer list */
typedef struct
{
buffer_entry_t buffer[MAX_BUFFER_ENTRIES]; /**< Maximum number of entries that can enqueued in the list */
uint8_t rp; /**< Index to the read location */
uint8_t wp; /**< Index to write location */
uint8_t count; /**< Number of elements in the list */
}buffer_list_t;
STATIC_ASSERT(sizeof(buffer_list_t) % 4 == 0);
static ble_hids_t m_hids; /**< Structure used to identify the HID service. */
static ble_bas_t m_bas; /**< Structure used to identify the battery service. */
static bool m_in_boot_mode = false; /**< Current protocol mode. */
static uint16_t m_conn_handle = BLE_CONN_HANDLE_INVALID; /**< Handle of the current connection. */
static sensorsim_cfg_t m_battery_sim_cfg; /**< Battery Level sensor simulator configuration. */
static sensorsim_state_t m_battery_sim_state; /**< Battery Level sensor simulator state. */
APP_TIMER_DEF(m_battery_timer_id); /**< Battery timer. */
static dm_application_instance_t m_app_handle; /**< Application identifier allocated by device manager. */
static dm_handle_t m_bonded_peer_handle; /**< Device reference handle to the current bonded central. */
static bool m_caps_on = false; /**< Variable to indicate if Caps Lock is turned on. */
static ble_uuid_t m_adv_uuids[] = {{BLE_UUID_HUMAN_INTERFACE_DEVICE_SERVICE, BLE_UUID_TYPE_BLE}};
static uint8_t m_sample_key_press_scan_str[] = /**< Key pattern to be sent when the key press button has been pushed. */
{
0x5a, /* Key h */
0x5a, /* Key h */
0x5a, /* Key h */
0x5a, /* Key h */
0x5a, /* Key h */
0x5a, /* Key h */
};
static uint8_t UP_KEY[] = /**< Key pattern to be sent when the key press button has been pushed. */
{
0x60, /* Key h */
0x60, /* Key h */
0x60, /* Key h */
0x60, /* Key h */
0x60,
0x60,
};
static uint8_t LEFT_KEY[] = /**< Key pattern to be sent when the key press button has been pushed. */
{
0x5c, /* Key h */
0x5c, /* Key h */
0x5c, /* Key h */
0x5c, /* Key h */
0x5c, /* Key h */
0x5c, /* Key h */
};
static uint8_t RIGHT_KEY[] = /**< Key pattern to be sent when the key press button has been pushed. */
{
0x5e, /* Key h */
0x5e, /* Key h */
0x5e, /* Key h */
0x5e, /* Key h */
0x5e, /* Key h */
0x5e, /* Key h */
};
static uint8_t ENTER_KEY[] = /**< Key pattern to be sent when the key press button has been pushed. */
{
0x58, /* Key h */
0x58, /* Key h */
0x58, /* Key h */
0x58, /* Key h */
0x58, /* Key h */
0x58, /* Key h */
};
/** List to enqueue not just data to be sent, but also related information like the handle, connection handle etc */
static buffer_list_t buffer_list;
static void on_hids_evt(ble_hids_t * p_hids, ble_hids_evt_t * p_evt);
/**@brief Callback function for asserts in the SoftDevice.
*
* @details This function will be called in case of an assert in the SoftDevice.
*
* @warning This handler is an example only and does not fit a final product. You need to analyze
* how your product is supposed to react in case of Assert.
* @warning On assert from the SoftDevice, the system can only recover on reset.
*
* @param[in] line_num Line number of the failing ASSERT call.
* @param[in] file_name File name of the failing ASSERT call.
*/
void assert_nrf_callback(uint16_t line_num, const uint8_t * p_file_name)
{
app_error_handler(DEAD_BEEF, line_num, p_file_name);
}
/**@brief Function for handling Service errors.
*
* @details A pointer to this function will be passed to each service which may need to inform the
* application about an error.
*
* @param[in] nrf_error Error code containing information about what went wrong.
*/
static void service_error_handler(uint32_t nrf_error)
{
APP_ERROR_HANDLER(nrf_error);
}
/**@brief Function for handling advertising errors.
*
* @param[in] nrf_error Error code containing information about what went wrong.
*/
static void ble_advertising_error_handler(uint32_t nrf_error)
{
APP_ERROR_HANDLER(nrf_error);
}
/**@brief Function for performing a battery measurement, and update the Battery Level characteristic in the Battery Service.
*/
static void battery_level_update(void)
{
uint32_t err_code;
uint8_t battery_level;
battery_level = (uint8_t)sensorsim_measure(&m_battery_sim_state, &m_battery_sim_cfg);
err_code = ble_bas_battery_level_update(&m_bas, battery_level);
if ((err_code != NRF_SUCCESS) &&
(err_code != NRF_ERROR_INVALID_STATE) &&
(err_code != BLE_ERROR_NO_TX_BUFFERS) &&
(err_code != BLE_ERROR_GATTS_SYS_ATTR_MISSING)
)
{
APP_ERROR_HANDLER(err_code);
}
}
/**@brief Function for handling the Battery measurement timer timeout.
*
* @details This function will be called each time the battery level measurement timer expires.
*
* @param[in] p_context Pointer used for passing some arbitrary information (context) from the
* app_start_timer() call to the timeout handler.
*/
static void battery_level_meas_timeout_handler(void * p_context)
{
UNUSED_PARAMETER(p_context);
battery_level_update();
}
/**@brief Function for the Timer initialization.
*
* @details Initializes the timer module.
*/
static void timers_init(void)
{
uint32_t err_code;
// Initialize timer module, making it use the scheduler.
APP_TIMER_APPSH_INIT(APP_TIMER_PRESCALER, APP_TIMER_OP_QUEUE_SIZE, true);
// Create battery timer.
err_code = app_timer_create(&m_battery_timer_id,
APP_TIMER_MODE_REPEATED,
battery_level_meas_timeout_handler);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for the GAP initialization.
*
* @details This function sets up all the necessary GAP (Generic Access Profile) parameters of the
* device including the device name, appearance, and the preferred connection parameters.
*/
static void gap_params_init(void)
{
uint32_t err_code;
ble_gap_conn_params_t gap_conn_params;
ble_gap_conn_sec_mode_t sec_mode;
BLE_GAP_CONN_SEC_MODE_SET_OPEN(&sec_mode);
err_code = sd_ble_gap_device_name_set(&sec_mode,
(const uint8_t *)DEVICE_NAME,
strlen(DEVICE_NAME));
APP_ERROR_CHECK(err_code);
err_code = sd_ble_gap_appearance_set(BLE_APPEARANCE_HID_KEYBOARD);
APP_ERROR_CHECK(err_code);
memset(&gap_conn_params, 0, sizeof(gap_conn_params));
gap_conn_params.min_conn_interval = MIN_CONN_INTERVAL;
gap_conn_params.max_conn_interval = MAX_CONN_INTERVAL;
gap_conn_params.slave_latency = SLAVE_LATENCY;
gap_conn_params.conn_sup_timeout = CONN_SUP_TIMEOUT;
err_code = sd_ble_gap_ppcp_set(&gap_conn_params);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for initializing Device Information Service.
*/
static void dis_init(void)
{
uint32_t err_code;
ble_dis_init_t dis_init_obj;
ble_dis_pnp_id_t pnp_id;
pnp_id.vendor_id_source = PNP_ID_VENDOR_ID_SOURCE;
pnp_id.vendor_id = PNP_ID_VENDOR_ID;
pnp_id.product_id = PNP_ID_PRODUCT_ID;
pnp_id.product_version = PNP_ID_PRODUCT_VERSION;
memset(&dis_init_obj, 0, sizeof(dis_init_obj));
ble_srv_ascii_to_utf8(&dis_init_obj.manufact_name_str, MANUFACTURER_NAME);
dis_init_obj.p_pnp_id = &pnp_id;
BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM(&dis_init_obj.dis_attr_md.read_perm);
BLE_GAP_CONN_SEC_MODE_SET_NO_ACCESS(&dis_init_obj.dis_attr_md.write_perm);
err_code = ble_dis_init(&dis_init_obj);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for initializing Battery Service.
*/
static void bas_init(void)
{
uint32_t err_code;
ble_bas_init_t bas_init_obj;
memset(&bas_init_obj, 0, sizeof(bas_init_obj));
bas_init_obj.evt_handler = NULL;
bas_init_obj.support_notification = true;
bas_init_obj.p_report_ref = NULL;
bas_init_obj.initial_batt_level = 100;
BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM(&bas_init_obj.battery_level_char_attr_md.cccd_write_perm);
BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM(&bas_init_obj.battery_level_char_attr_md.read_perm);
BLE_GAP_CONN_SEC_MODE_SET_NO_ACCESS(&bas_init_obj.battery_level_char_attr_md.write_perm);
BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM(&bas_init_obj.battery_level_report_read_perm);
err_code = ble_bas_init(&m_bas, &bas_init_obj);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for initializing HID Service.
*/
static void hids_init(void)
{
uint32_t err_code;
ble_hids_init_t hids_init_obj;
ble_hids_inp_rep_init_t input_report_array[1];
ble_hids_inp_rep_init_t * p_input_report;
ble_hids_outp_rep_init_t output_report_array[1];
ble_hids_outp_rep_init_t * p_output_report;
uint8_t hid_info_flags;
memset((void *)input_report_array, 0, sizeof(ble_hids_inp_rep_init_t));
memset((void *)output_report_array, 0, sizeof(ble_hids_outp_rep_init_t));
static uint8_t report_map_data[] =
{
0x05, 0x01, // Usage Page (Generic Desktop)
0x09, 0x06, // Usage (Keyboard)
0xA1, 0x01, // Collection (Application)
0x05, 0x07, // Usage Page (Key Codes)
0x19, 0xe0, // Usage Minimum (224)
0x29, 0xe7, // Usage Maximum (231)
0x15, 0x00, // Logical Minimum (0)
0x25, 0x01, // Logical Maximum (1)
0x75, 0x01, // Report Size (1)
0x95, 0x08, // Report Count (8)
0x81, 0x02, // Input (Data, Variable, Absolute)
0x95, 0x01, // Report Count (1)
0x75, 0x08, // Report Size (8)
0x81, 0x01, // Input (Constant) reserved byte(1)
0x95, 0x05, // Report Count (5)
0x75, 0x01, // Report Size (1)
0x05, 0x08, // Usage Page (Page# for LEDs)
0x19, 0x01, // Usage Minimum (1)
0x29, 0x05, // Usage Maximum (5)
0x91, 0x02, // Output (Data, Variable, Absolute), Led report
0x95, 0x01, // Report Count (1)
0x75, 0x03, // Report Size (3)
0x91, 0x01, // Output (Data, Variable, Absolute), Led report padding
0x95, 0x06, // Report Count (6)
0x75, 0x08, // Report Size (8)
0x15, 0x00, // Logical Minimum (0)
0x25, 0x65, // Logical Maximum (101)
0x05, 0x07, // Usage Page (Key codes)
0x19, 0x00, // Usage Minimum (0)
0x29, 0x65, // Usage Maximum (101)
0x81, 0x00, // Input (Data, Array) Key array(6 bytes)
0x09, 0x05, // Usage (Vendor Defined)
0x15, 0x00, // Logical Minimum (0)
0x26, 0xFF, 0x00, // Logical Maximum (255)
0x75, 0x08, // Report Count (2)
0x95, 0x02, // Report Size (8 bit)
0xB1, 0x02, // Feature (Data, Variable, Absolute)
0xC0 // End Collection (Application)
};
// Initialize HID Service
p_input_report = &input_report_array[INPUT_REPORT_KEYS_INDEX];
p_input_report->max_len = INPUT_REPORT_KEYS_MAX_LEN;
p_input_report->rep_ref.report_id = INPUT_REP_REF_ID;
p_input_report->rep_ref.report_type = BLE_HIDS_REP_TYPE_INPUT;
BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM(&p_input_report->security_mode.cccd_write_perm);
BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM(&p_input_report->security_mode.read_perm);
BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM(&p_input_report->security_mode.write_perm);
p_output_report = &output_report_array[OUTPUT_REPORT_INDEX];
p_output_report->max_len = OUTPUT_REPORT_MAX_LEN;
p_output_report->rep_ref.report_id = OUTPUT_REP_REF_ID;
p_output_report->rep_ref.report_type = BLE_HIDS_REP_TYPE_OUTPUT;
BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM(&p_output_report->security_mode.read_perm);
BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM(&p_output_report->security_mode.write_perm);
hid_info_flags = HID_INFO_FLAG_REMOTE_WAKE_MSK | HID_INFO_FLAG_NORMALLY_CONNECTABLE_MSK;
memset(&hids_init_obj, 0, sizeof(hids_init_obj));
hids_init_obj.evt_handler = on_hids_evt;
hids_init_obj.error_handler = service_error_handler;
hids_init_obj.is_kb = true;
hids_init_obj.is_mouse = false;
hids_init_obj.inp_rep_count = 1;
hids_init_obj.p_inp_rep_array = input_report_array;
hids_init_obj.outp_rep_count = 1;
hids_init_obj.p_outp_rep_array = output_report_array;
hids_init_obj.feature_rep_count = 0;
hids_init_obj.p_feature_rep_array = NULL;
hids_init_obj.rep_map.data_len = sizeof(report_map_data);
hids_init_obj.rep_map.p_data = report_map_data;
hids_init_obj.hid_information.bcd_hid = BASE_USB_HID_SPEC_VERSION;
hids_init_obj.hid_information.b_country_code = 0;
hids_init_obj.hid_information.flags = hid_info_flags;
hids_init_obj.included_services_count = 0;
hids_init_obj.p_included_services_array = NULL;
BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM(&hids_init_obj.rep_map.security_mode.read_perm);
BLE_GAP_CONN_SEC_MODE_SET_NO_ACCESS(&hids_init_obj.rep_map.security_mode.write_perm);
BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM(&hids_init_obj.hid_information.security_mode.read_perm);
BLE_GAP_CONN_SEC_MODE_SET_NO_ACCESS(&hids_init_obj.hid_information.security_mode.write_perm);
BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM(
&hids_init_obj.security_mode_boot_kb_inp_rep.cccd_write_perm);
BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM(&hids_init_obj.security_mode_boot_kb_inp_rep.read_perm);
BLE_GAP_CONN_SEC_MODE_SET_NO_ACCESS(&hids_init_obj.security_mode_boot_kb_inp_rep.write_perm);
BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM(&hids_init_obj.security_mode_boot_kb_outp_rep.read_perm);
BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM(&hids_init_obj.security_mode_boot_kb_outp_rep.write_perm);
BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM(&hids_init_obj.security_mode_protocol.read_perm);
BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM(&hids_init_obj.security_mode_protocol.write_perm);
BLE_GAP_CONN_SEC_MODE_SET_NO_ACCESS(&hids_init_obj.security_mode_ctrl_point.read_perm);
BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM(&hids_init_obj.security_mode_ctrl_point.write_perm);
err_code = ble_hids_init(&m_hids, &hids_init_obj);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for initializing services that will be used by the application.
*/
static void services_init(void)
{
dis_init();
bas_init();
hids_init();
}
/**@brief Function for initializing the battery sensor simulator.
*/
static void sensor_simulator_init(void)
{
m_battery_sim_cfg.min = MIN_BATTERY_LEVEL;
m_battery_sim_cfg.max = MAX_BATTERY_LEVEL;
m_battery_sim_cfg.incr = BATTERY_LEVEL_INCREMENT;
m_battery_sim_cfg.start_at_max = true;
sensorsim_init(&m_battery_sim_state, &m_battery_sim_cfg);
}
/**@brief Function for handling a Connection Parameters error.
*
* @param[in] nrf_error Error code containing information about what went wrong.
*/
static void conn_params_error_handler(uint32_t nrf_error)
{
APP_ERROR_HANDLER(nrf_error);
}
/**@brief Function for initializing the Connection Parameters module.
*/
static void conn_params_init(void)
{
uint32_t err_code;
ble_conn_params_init_t cp_init;
memset(&cp_init, 0, sizeof(cp_init));
cp_init.p_conn_params = NULL;
cp_init.first_conn_params_update_delay = FIRST_CONN_PARAMS_UPDATE_DELAY;
cp_init.next_conn_params_update_delay = NEXT_CONN_PARAMS_UPDATE_DELAY;
cp_init.max_conn_params_update_count = MAX_CONN_PARAMS_UPDATE_COUNT;
cp_init.start_on_notify_cccd_handle = BLE_GATT_HANDLE_INVALID;
cp_init.disconnect_on_fail = false;
cp_init.evt_handler = NULL;
cp_init.error_handler = conn_params_error_handler;
err_code = ble_conn_params_init(&cp_init);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for starting timers.
*/
static void timers_start(void)
{
uint32_t err_code;
err_code = app_timer_start(m_battery_timer_id, BATTERY_LEVEL_MEAS_INTERVAL, NULL);
APP_ERROR_CHECK(err_code);
}
/** @brief Function for checking if the Shift key is pressed.
*
* @returns true if the SHIFT_BUTTON is pressed. false otherwise.
*/
/*static bool is_shift_key_pressed(void)
{
bool result;
uint32_t err_code = bsp_button_is_pressed(SHIFT_BUTTON_ID,&result);
APP_ERROR_CHECK(err_code);
return result;
}*/
/**@brief Function for transmitting a key scan Press & Release Notification.
*
* @warning This handler is an example only. You need to analyze how you wish to send the key
* release.
*
* @param[in] p_instance Identifies the service for which Key Notifications are requested.
* @param[in] p_key_pattern Pointer to key pattern.
* @param[in] pattern_len Length of key pattern. 0 < pattern_len < 7.
* @param[in] pattern_offset Offset applied to Key Pattern for transmission.
* @param[out] actual_len Provides actual length of Key Pattern transmitted, making buffering of
* rest possible if needed.
* @return NRF_SUCCESS on success, BLE_ERROR_NO_TX_BUFFERS in case transmission could not be
* completed due to lack of transmission buffer or other error codes indicating reason
* for failure.
*
* @note In case of BLE_ERROR_NO_TX_BUFFERS, remaining pattern that could not be transmitted
* can be enqueued \ref buffer_enqueue function.
* In case a pattern of 'cofFEe' is the p_key_pattern, with pattern_len as 6 and
* pattern_offset as 0, the notifications as observed on the peer side would be
* 1> 'c', 'o', 'f', 'F', 'E', 'e'
* 2> - , 'o', 'f', 'F', 'E', 'e'
* 3> - , -, 'f', 'F', 'E', 'e'
* 4> - , -, -, 'F', 'E', 'e'
* 5> - , -, -, -, 'E', 'e'
* 6> - , -, -, -, -, 'e'
* 7> - , -, -, -, -, -
* Here, '-' refers to release, 'c' refers to the key character being transmitted.
* Therefore 7 notifications will be sent.
* In case an offset of 4 was provided, the pattern notifications sent will be from 5-7
* will be transmitted.
*/
static uint32_t send_key_scan_press_release(ble_hids_t * p_hids,
uint8_t * p_key_pattern,
uint16_t pattern_len,
uint16_t pattern_offset,
uint16_t * p_actual_len)
{
uint32_t err_code;
uint16_t offset;
uint16_t data_len;
uint8_t data[INPUT_REPORT_KEYS_MAX_LEN];
// HID Report Descriptor enumerates an array of size 6, the pattern hence shall not be any
// longer than this.
STATIC_ASSERT((INPUT_REPORT_KEYS_MAX_LEN - 2) == 6);
ASSERT(pattern_len <= (INPUT_REPORT_KEYS_MAX_LEN - 2));
offset = pattern_offset;
data_len = pattern_len;
do
{
// Reset the data buffer.
memset(data, 0, sizeof(data));
// Copy the scan code.
memcpy(data + SCAN_CODE_POS + offset, p_key_pattern + offset, data_len - offset);
/*if (is_shift_key_pressed())
{
data[MODIFIER_KEY_POS] |= SHIFT_KEY_CODE;
}*/
if (!m_in_boot_mode)
{
err_code = ble_hids_inp_rep_send(p_hids,
INPUT_REPORT_KEYS_INDEX,
INPUT_REPORT_KEYS_MAX_LEN,
data);
}
else
{
err_code = ble_hids_boot_kb_inp_rep_send(p_hids,
INPUT_REPORT_KEYS_MAX_LEN,
data);
}
if (err_code != NRF_SUCCESS)
{
break;
}
offset++;
} while (offset <= data_len);
*p_actual_len = offset;
return err_code;
}
/**@brief Function for initializing the buffer queue used to key events that could not be
* transmitted
*
* @warning This handler is an example only. You need to analyze how you wish to buffer or buffer at
* all.
*
* @note In case of HID keyboard, a temporary buffering could be employed to handle scenarios
* where encryption is not yet enabled or there was a momentary link loss or there were no
* Transmit buffers.
*/
static void buffer_init(void)
{
uint32_t buffer_count;
BUFFER_LIST_INIT();
for (buffer_count = 0; buffer_count < MAX_BUFFER_ENTRIES; buffer_count++)
{
BUFFER_ELEMENT_INIT(buffer_count);
}
}
/**@brief Function for enqueuing key scan patterns that could not be transmitted either completely
* or partially.
*
* @warning This handler is an example only. You need to analyze how you wish to send the key
* release.
*
* @param[in] p_hids Identifies the service for which Key Notifications are buffered.
* @param[in] p_key_pattern Pointer to key pattern.
* @param[in] pattern_len Length of key pattern.
* @param[in] offset Offset applied to Key Pattern when requesting a transmission on
* dequeue, @ref buffer_dequeue.
* @return NRF_SUCCESS on success, else an error code indicating reason for failure.
*/
static uint32_t buffer_enqueue(ble_hids_t * p_hids,
uint8_t * p_key_pattern,
uint16_t pattern_len,
uint16_t offset)
{
buffer_entry_t * element;
uint32_t err_code = NRF_SUCCESS;
if (BUFFER_LIST_FULL())
{
// Element cannot be buffered.
err_code = NRF_ERROR_NO_MEM;
}
else
{
// Make entry of buffer element and copy data.
element = &buffer_list.buffer[(buffer_list.wp)];
element->p_instance = p_hids;
element->p_data = p_key_pattern;
element->data_offset = offset;
element->data_len = pattern_len;
buffer_list.count++;
buffer_list.wp++;
if (buffer_list.wp == MAX_BUFFER_ENTRIES)
{
buffer_list.wp = 0;
}
}
return err_code;
}
/**@brief Function to dequeue key scan patterns that could not be transmitted either completely of
* partially.
*
* @warning This handler is an example only. You need to analyze how you wish to send the key
* release.
*
* @param[in] tx_flag Indicative of whether the dequeue should result in transmission or not.
* @note A typical example when all keys are dequeued with transmission is when link is
* disconnected.
*
* @return NRF_SUCCESS on success, else an error code indicating reason for failure.
*/
static uint32_t buffer_dequeue(bool tx_flag)
{
buffer_entry_t * p_element;
uint32_t err_code = NRF_SUCCESS;
uint16_t actual_len;
if (BUFFER_LIST_EMPTY())
{
err_code = NRF_ERROR_NOT_FOUND;
}
else
{
bool remove_element = true;
p_element = &buffer_list.buffer[(buffer_list.rp)];
if (tx_flag)
{
err_code = send_key_scan_press_release(p_element->p_instance,
p_element->p_data,
p_element->data_len,
p_element->data_offset,
&actual_len);
// An additional notification is needed for release of all keys, therefore check
// is for actual_len <= element->data_len and not actual_len < element->data_len
if ((err_code == BLE_ERROR_NO_TX_BUFFERS) && (actual_len <= p_element->data_len))
{
// Transmission could not be completed, do not remove the entry, adjust next data to
// be transmitted
p_element->data_offset = actual_len;
remove_element = false;
}
}
if (remove_element)
{
BUFFER_ELEMENT_INIT(buffer_list.rp);
buffer_list.rp++;
buffer_list.count--;
if (buffer_list.rp == MAX_BUFFER_ENTRIES)
{
buffer_list.rp = 0;
}
}
}
return err_code;
}
/**@brief Function for sending sample key presses to the peer.
*
* @param[in] key_pattern_len Pattern length.
* @param[in] p_key_pattern Pattern to be sent.
*/
static void keys_send(uint8_t key_pattern_len, uint8_t * p_key_pattern)
{
uint32_t err_code;
uint16_t actual_len;
err_code = send_key_scan_press_release(&m_hids,
p_key_pattern,
key_pattern_len,
0,
&actual_len);
// An additional notification is needed for release of all keys, therefore check
// is for actual_len <= key_pattern_len and not actual_len < key_pattern_len.
if ((err_code == BLE_ERROR_NO_TX_BUFFERS) && (actual_len <= key_pattern_len))
{
// Buffer enqueue routine return value is not intentionally checked.
// Rationale: Its better to have a a few keys missing than have a system
// reset. Recommendation is to work out most optimal value for
// MAX_BUFFER_ENTRIES to minimize chances of buffer queue full condition
UNUSED_VARIABLE(buffer_enqueue(&m_hids, p_key_pattern, key_pattern_len, actual_len));
}
if ((err_code != NRF_SUCCESS) &&
(err_code != NRF_ERROR_INVALID_STATE) &&
(err_code != BLE_ERROR_NO_TX_BUFFERS) &&
(err_code != BLE_ERROR_GATTS_SYS_ATTR_MISSING)
)
{
APP_ERROR_HANDLER(err_code);
}
}
/**@brief Function for handling the HID Report Characteristic Write event.
*
* @param[in] p_evt HID service event.
*/
static void on_hid_rep_char_write(ble_hids_evt_t *p_evt)
{
if (p_evt->params.char_write.char_id.rep_type == BLE_HIDS_REP_TYPE_OUTPUT)
{
uint32_t err_code;
uint8_t report_val;
uint8_t report_index = p_evt->params.char_write.char_id.rep_index;
if (report_index == OUTPUT_REPORT_INDEX)
{
// This code assumes that the outptu report is one byte long. Hence the following
// static assert is made.
STATIC_ASSERT(OUTPUT_REPORT_MAX_LEN == 1);
err_code = ble_hids_outp_rep_get(&m_hids,
report_index,
OUTPUT_REPORT_MAX_LEN,
0,
&report_val);
APP_ERROR_CHECK(err_code);
if (!m_caps_on && ((report_val & OUTPUT_REPORT_BIT_MASK_CAPS_LOCK) != 0))
{
// Caps Lock is turned On.
err_code = bsp_indication_set(BSP_INDICATE_ALERT_3);
APP_ERROR_CHECK(err_code);
// keys_send(sizeof(m_caps_on_key_scan_str), m_caps_on_key_scan_str);
m_caps_on = true;
}
else if (m_caps_on && ((report_val & OUTPUT_REPORT_BIT_MASK_CAPS_LOCK) == 0))
{
// Caps Lock is turned Off .
err_code = bsp_indication_set(BSP_INDICATE_ALERT_OFF);
APP_ERROR_CHECK(err_code);
// keys_send(sizeof(m_caps_off_key_scan_str), m_caps_off_key_scan_str);
m_caps_on = false;
}
else
{
// The report received is not supported by this application. Do nothing.
}
}
}
}
/**@brief Function for putting the chip into sleep mode.
*
* @note This function will not return.
*/
static void sleep_mode_enter(void)
{
uint32_t err_code = bsp_indication_set(BSP_INDICATE_IDLE);
APP_ERROR_CHECK(err_code);
// Prepare wakeup buttons.
err_code = bsp_btn_ble_sleep_mode_prepare();
APP_ERROR_CHECK(err_code);
// Go to system-off mode (this function will not return; wakeup will cause a reset).
err_code = sd_power_system_off();
APP_ERROR_CHECK(err_code);
}
/**@brief Function for handling HID events.
*
* @details This function will be called for all HID events which are passed to the application.
*
* @param[in] p_hids HID service structure.
* @param[in] p_evt Event received from the HID service.
*/
static void on_hids_evt(ble_hids_t * p_hids, ble_hids_evt_t *p_evt)
{
switch (p_evt->evt_type)
{
case BLE_HIDS_EVT_BOOT_MODE_ENTERED:
m_in_boot_mode = true;
break;
case BLE_HIDS_EVT_REPORT_MODE_ENTERED:
m_in_boot_mode = false;
break;
case BLE_HIDS_EVT_REP_CHAR_WRITE:
on_hid_rep_char_write(p_evt);
break;
case BLE_HIDS_EVT_NOTIF_ENABLED:
{
dm_service_context_t service_context;
service_context.service_type = DM_PROTOCOL_CNTXT_GATT_SRVR_ID;
service_context.context_data.len = 0;
service_context.context_data.p_data = NULL;
if (m_in_boot_mode)
{
// Protocol mode is Boot Protocol mode.
if (
p_evt->params.notification.char_id.uuid
==
BLE_UUID_BOOT_KEYBOARD_INPUT_REPORT_CHAR
)
{
// The notification of boot keyboard input report has been enabled.
// Save the system attribute (CCCD) information into the flash.
uint32_t err_code;
err_code = dm_service_context_set(&m_bonded_peer_handle, &service_context);
if (err_code != NRF_ERROR_INVALID_STATE)
{
APP_ERROR_CHECK(err_code);
}
else
{
// The system attributes could not be written to the flash because
// the connected central is not a new central. The system attributes
// will only be written to flash only when disconnected from this central.
// Do nothing now.
}
}
else
{
// Do nothing.
}
}
else if (p_evt->params.notification.char_id.rep_type == BLE_HIDS_REP_TYPE_INPUT)
{
// The protocol mode is Report Protocol mode. And the CCCD for the input report
// is changed. It is now time to store all the CCCD information (system
// attributes) into the flash.
uint32_t err_code;
err_code = dm_service_context_set(&m_bonded_peer_handle, &service_context);
if (err_code != NRF_ERROR_INVALID_STATE)
{
APP_ERROR_CHECK(err_code);
}
else
{
// The system attributes could not be written to the flash because
// the connected central is not a new central. The system attributes
// will only be written to flash only when disconnected from this central.
// Do nothing now.
}
}
else
{
// The notification of the report that was enabled by the central is not interesting
// to this application. So do nothing.
}
break;
}
default:
// No implementation needed.
break;
}
}
/**@brief Function for handling advertising events.
*
* @details This function will be called for advertising events which are passed to the application.
*
* @param[in] ble_adv_evt Advertising event.
*/
static void on_adv_evt(ble_adv_evt_t ble_adv_evt)
{
uint32_t err_code;
switch (ble_adv_evt)
{
case BLE_ADV_EVT_DIRECTED:
err_code = bsp_indication_set(BSP_INDICATE_ADVERTISING_DIRECTED);
APP_ERROR_CHECK(err_code);
break;
case BLE_ADV_EVT_FAST:
err_code = bsp_indication_set(BSP_INDICATE_ADVERTISING);
APP_ERROR_CHECK(err_code);
break;
case BLE_ADV_EVT_SLOW:
err_code = bsp_indication_set(BSP_INDICATE_ADVERTISING_SLOW);
APP_ERROR_CHECK(err_code);
break;
case BLE_ADV_EVT_FAST_WHITELIST:
err_code = bsp_indication_set(BSP_INDICATE_ADVERTISING_WHITELIST);
APP_ERROR_CHECK(err_code);
break;
case BLE_ADV_EVT_SLOW_WHITELIST:
err_code = bsp_indication_set(BSP_INDICATE_ADVERTISING_WHITELIST);
APP_ERROR_CHECK(err_code);
break;
case BLE_ADV_EVT_IDLE:
sleep_mode_enter();
break;
case BLE_ADV_EVT_WHITELIST_REQUEST:
{
ble_gap_whitelist_t whitelist;
ble_gap_addr_t * p_whitelist_addr[BLE_GAP_WHITELIST_ADDR_MAX_COUNT];
ble_gap_irk_t * p_whitelist_irk[BLE_GAP_WHITELIST_IRK_MAX_COUNT];
whitelist.addr_count = BLE_GAP_WHITELIST_ADDR_MAX_COUNT;
whitelist.irk_count = BLE_GAP_WHITELIST_IRK_MAX_COUNT;
whitelist.pp_addrs = p_whitelist_addr;
whitelist.pp_irks = p_whitelist_irk;
err_code = dm_whitelist_create(&m_app_handle, &whitelist);
APP_ERROR_CHECK(err_code);
err_code = ble_advertising_whitelist_reply(&whitelist);
APP_ERROR_CHECK(err_code);
break;
}
case BLE_ADV_EVT_PEER_ADDR_REQUEST:
{
ble_gap_addr_t peer_address;
// Only Give peer address if we have a handle to the bonded peer.
if(m_bonded_peer_handle.appl_id != DM_INVALID_ID)
{
err_code = dm_peer_addr_get(&m_bonded_peer_handle, &peer_address);
APP_ERROR_CHECK(err_code);
err_code = ble_advertising_peer_addr_reply(&peer_address);
APP_ERROR_CHECK(err_code);
}
break;
}
default:
break;
}
}
/**@brief Function for handling the Application's BLE Stack events.
*
* @param[in] p_ble_evt Bluetooth stack event.
*/
static void on_ble_evt(ble_evt_t * p_ble_evt)
{
uint32_t err_code;
ble_gatts_rw_authorize_reply_params_t auth_reply;
switch (p_ble_evt->header.evt_id)
{
case BLE_GAP_EVT_CONNECTED:
err_code = bsp_indication_set(BSP_INDICATE_CONNECTED);
APP_ERROR_CHECK(err_code);
m_conn_handle = p_ble_evt->evt.gap_evt.conn_handle;
break;
case BLE_EVT_TX_COMPLETE:
// Send next key event
(void) buffer_dequeue(true);
break;
case BLE_GAP_EVT_DISCONNECTED:
// Dequeue all keys without transmission.
(void) buffer_dequeue(false);
m_conn_handle = BLE_CONN_HANDLE_INVALID;
// Reset m_caps_on variable. Upon reconnect, the HID host will re-send the Output
// report containing the Caps lock state.
m_caps_on = false;
// disabling alert 3. signal - used for capslock ON
err_code = bsp_indication_set(BSP_INDICATE_ALERT_OFF);
APP_ERROR_CHECK(err_code);
break;
case BLE_EVT_USER_MEM_REQUEST:
err_code = sd_ble_user_mem_reply(m_conn_handle, NULL);
APP_ERROR_CHECK(err_code);
break;
case BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST:
if(p_ble_evt->evt.gatts_evt.params.authorize_request.type
!= BLE_GATTS_AUTHORIZE_TYPE_INVALID)
{
if ((p_ble_evt->evt.gatts_evt.params.authorize_request.request.write.op
== BLE_GATTS_OP_PREP_WRITE_REQ)
|| (p_ble_evt->evt.gatts_evt.params.authorize_request.request.write.op
== BLE_GATTS_OP_EXEC_WRITE_REQ_NOW)
|| (p_ble_evt->evt.gatts_evt.params.authorize_request.request.write.op
== BLE_GATTS_OP_EXEC_WRITE_REQ_CANCEL))
{
if (p_ble_evt->evt.gatts_evt.params.authorize_request.type
== BLE_GATTS_AUTHORIZE_TYPE_WRITE)
{
auth_reply.type = BLE_GATTS_AUTHORIZE_TYPE_WRITE;
}
else
{
auth_reply.type = BLE_GATTS_AUTHORIZE_TYPE_READ;
}
auth_reply.params.write.gatt_status = APP_FEATURE_NOT_SUPPORTED;
err_code = sd_ble_gatts_rw_authorize_reply(m_conn_handle,&auth_reply);
APP_ERROR_CHECK(err_code);
}
}
break;
case BLE_GATTC_EVT_TIMEOUT:
case BLE_GATTS_EVT_TIMEOUT:
// Disconnect on GATT Server and Client timeout events.
err_code = sd_ble_gap_disconnect(m_conn_handle,
BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
APP_ERROR_CHECK(err_code);
break;
default:
// No implementation needed.
break;
}
}
/**@brief Function for dispatching a BLE stack event to all modules with a BLE stack event handler.
*
* @details This function is called from the scheduler in the main loop after a BLE stack
* event has been received.
*
* @param[in] p_ble_evt Bluetooth stack event.
*/
static void ble_evt_dispatch(ble_evt_t * p_ble_evt)
{
dm_ble_evt_handler(p_ble_evt);
bsp_btn_ble_on_ble_evt(p_ble_evt);
on_ble_evt(p_ble_evt);
ble_advertising_on_ble_evt(p_ble_evt);
ble_conn_params_on_ble_evt(p_ble_evt);
ble_hids_on_ble_evt(&m_hids, p_ble_evt);
ble_bas_on_ble_evt(&m_bas, p_ble_evt);
}
/**@brief Function for dispatching a system event to interested modules.
*
* @details This function is called from the System event interrupt handler after a system
* event has been received.
*
* @param[in] sys_evt System stack event.
*/
static void sys_evt_dispatch(uint32_t sys_evt)
{
pstorage_sys_event_handler(sys_evt);
ble_advertising_on_sys_evt(sys_evt);
}
/**@brief Function for initializing the BLE stack.
*
* @details Initializes the SoftDevice and the BLE event interrupt.
*/
static void ble_stack_init(void)
{
uint32_t err_code;
// Initialize the SoftDevice handler module.
SOFTDEVICE_HANDLER_APPSH_INIT(NRF_CLOCK_LFCLKSRC_XTAL_20_PPM, true);
// Enable BLE stack
ble_enable_params_t ble_enable_params;
memset(&ble_enable_params, 0, sizeof(ble_enable_params));
#if (defined(S130) || defined(S132))
ble_enable_params.gatts_enable_params.attr_tab_size = BLE_GATTS_ATTR_TAB_SIZE_DEFAULT;
#endif
ble_enable_params.gatts_enable_params.service_changed = IS_SRVC_CHANGED_CHARACT_PRESENT;
err_code = sd_ble_enable(&ble_enable_params);
APP_ERROR_CHECK(err_code);
// Register with the SoftDevice handler module for BLE events.
err_code = softdevice_ble_evt_handler_set(ble_evt_dispatch);
APP_ERROR_CHECK(err_code);
// Register with the SoftDevice handler module for BLE events.
err_code = softdevice_sys_evt_handler_set(sys_evt_dispatch);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for the Event Scheduler initialization.
*/
static void scheduler_init(void)
{
APP_SCHED_INIT(SCHED_MAX_EVENT_DATA_SIZE, SCHED_QUEUE_SIZE);
}
/**@brief Function for handling events from the BSP module.
*
* @param[in] event Event generated by button press.
*/
static void bsp_event_handler(bsp_event_t event)
{
uint32_t err_code;
static uint8_t * p_key = m_sample_key_press_scan_str;
static uint8_t * up_key = UP_KEY;
static uint8_t * left_key = LEFT_KEY;
static uint8_t * right_key = RIGHT_KEY;
static uint8_t * enter_key = ENTER_KEY;
static uint8_t size = 0;
switch (event)
{
case BSP_EVENT_SLEEP:
sleep_mode_enter();
break;
case BSP_EVENT_DISCONNECT:
err_code = sd_ble_gap_disconnect(m_conn_handle, BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
if (err_code != NRF_ERROR_INVALID_STATE)
{
APP_ERROR_CHECK(err_code);
}
break;
case BSP_EVENT_WHITELIST_OFF:
err_code = ble_advertising_restart_without_whitelist();
if (err_code != NRF_ERROR_INVALID_STATE)
{
APP_ERROR_CHECK(err_code);
}
break;
case BSP_EVENT_KEY_0:
if (m_conn_handle != BLE_CONN_HANDLE_INVALID)
{
keys_send(1, p_key);
p_key++;
size++;
if (size == MAX_KEYS_IN_ONE_REPORT)
{
p_key = m_sample_key_press_scan_str;
size = 0;
}
}
break;
case BSP_EVENT_KEY_1:
if (m_conn_handle != BLE_CONN_HANDLE_INVALID)
{
keys_send(1, up_key);
up_key++;
size++;
if (size == MAX_KEYS_IN_ONE_REPORT)
{
up_key = UP_KEY;
size = 0;
}
}
break;
case BSP_EVENT_KEY_2:
if (m_conn_handle != BLE_CONN_HANDLE_INVALID)
{
keys_send(1, left_key);
left_key++;
size++;
if (size == MAX_KEYS_IN_ONE_REPORT)
{
left_key = LEFT_KEY;
size = 0;
}
}
break;
case BSP_EVENT_KEY_3:
if (m_conn_handle != BLE_CONN_HANDLE_INVALID)
{
keys_send(1, right_key);
right_key++;
size++;
if (size == MAX_KEYS_IN_ONE_REPORT)
{
right_key = RIGHT_KEY;
size = 0;
}
}
break;
case BSP_EVENT_KEY_4:
if (m_conn_handle != BLE_CONN_HANDLE_INVALID)
{
keys_send(1, enter_key);
enter_key++;
size++;
if (size == MAX_KEYS_IN_ONE_REPORT)
{
enter_key = ENTER_KEY;
size = 0;
}
}
break;
default:
break;
}
}
/**@brief Function for initializing the Advertising functionality.
*/
static void advertising_init(void)
{
uint32_t err_code;
uint8_t adv_flags;
ble_advdata_t advdata;
// Build and set advertising data
memset(&advdata, 0, sizeof(advdata));
adv_flags = BLE_GAP_ADV_FLAGS_LE_ONLY_LIMITED_DISC_MODE;
advdata.name_type = BLE_ADVDATA_FULL_NAME;
advdata.include_appearance = true;
advdata.flags = adv_flags;
advdata.uuids_complete.uuid_cnt = sizeof(m_adv_uuids) / sizeof(m_adv_uuids[0]);
advdata.uuids_complete.p_uuids = m_adv_uuids;
ble_adv_modes_config_t options =
{
BLE_ADV_WHITELIST_ENABLED,
BLE_ADV_DIRECTED_ENABLED,
BLE_ADV_DIRECTED_SLOW_DISABLED, 0,0,
BLE_ADV_FAST_ENABLED, APP_ADV_FAST_INTERVAL, APP_ADV_FAST_TIMEOUT,
BLE_ADV_SLOW_ENABLED, APP_ADV_SLOW_INTERVAL, APP_ADV_SLOW_TIMEOUT
};
err_code = ble_advertising_init(&advdata, NULL, &options, on_adv_evt, ble_advertising_error_handler);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for handling the Device Manager events.
*
* @param[in] p_evt Data associated to the device manager event.
*/
static uint32_t device_manager_evt_handler(dm_handle_t const * p_handle,
dm_event_t const * p_event,
ret_code_t event_result)
{
APP_ERROR_CHECK(event_result);
switch(p_event->event_id)
{
case DM_EVT_DEVICE_CONTEXT_LOADED: // Fall through.
case DM_EVT_SECURITY_SETUP_COMPLETE:
m_bonded_peer_handle = (*p_handle);
break;
}
return NRF_SUCCESS;
}
/**@brief Function for the Device Manager initialization.
*
* @param[in] erase_bonds Indicates whether bonding information should be cleared from
* persistent storage during initialization of the Device Manager.
*/
static void device_manager_init(bool erase_bonds)
{
uint32_t err_code;
dm_init_param_t init_param = {.clear_persistent_data = erase_bonds};
dm_application_param_t register_param;
// Initialize peer device handle.
err_code = dm_handle_initialize(&m_bonded_peer_handle);
APP_ERROR_CHECK(err_code);
// Initialize persistent storage module.
err_code = pstorage_init();
APP_ERROR_CHECK(err_code);
err_code = dm_init(&init_param);
APP_ERROR_CHECK(err_code);
memset(®ister_param.sec_param, 0, sizeof(ble_gap_sec_params_t));
register_param.sec_param.bond = SEC_PARAM_BOND;
register_param.sec_param.mitm = SEC_PARAM_MITM;
register_param.sec_param.io_caps = SEC_PARAM_IO_CAPABILITIES;
register_param.sec_param.oob = SEC_PARAM_OOB;
register_param.sec_param.min_key_size = SEC_PARAM_MIN_KEY_SIZE;
register_param.sec_param.max_key_size = SEC_PARAM_MAX_KEY_SIZE;
register_param.evt_handler = device_manager_evt_handler;
register_param.service_type = DM_PROTOCOL_CNTXT_GATT_SRVR_ID;
err_code = dm_register(&m_app_handle, ®ister_param);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for initializing buttons and leds.
*
* @param[out] p_erase_bonds Will be true if the clear bonding button was pressed to wake the application up.
*/
static void buttons_leds_init(bool * p_erase_bonds)
{
bsp_event_t startup_event;
uint32_t err_code = bsp_init(BSP_INIT_LED | BSP_INIT_BUTTONS,
APP_TIMER_TICKS(100, APP_TIMER_PRESCALER),
bsp_event_handler);
APP_ERROR_CHECK(err_code);
err_code = bsp_btn_ble_init(NULL, &startup_event);
APP_ERROR_CHECK(err_code);
*p_erase_bonds = (startup_event == BSP_EVENT_CLEAR_BONDING_DATA);
}
/**@brief Function for the Power manager.
*/
static void power_manage(void)
{
uint32_t err_code = sd_app_evt_wait();
APP_ERROR_CHECK(err_code);
}
/**@brief Function for application main entry.
*/
int main(void)
{
bool erase_bonds;
uint32_t err_code;
// Initialize.
app_trace_init();
timers_init();
buttons_leds_init(&erase_bonds);
ble_stack_init();
scheduler_init();
device_manager_init(erase_bonds);
gap_params_init();
advertising_init();
services_init();
sensor_simulator_init();
conn_params_init();
buffer_init();
// Start execution.
timers_start();
err_code = ble_advertising_start(BLE_ADV_MODE_FAST);
APP_ERROR_CHECK(err_code);
// Enter main loop.
for (;;)
{
app_sched_execute();
power_manage();
}
}
/**
* @}
*/
