Hi,
I have 2 pins with PULL_UP in sense mode and when i use sd_power_system_off() i measure 25mA current, which is higher than when my system is on (around 10mA)!! How is that possible? Any advice?
nrf_gpio_cfg_sense_input(14, NRF_GPIO_PIN_PULLUP, NRF_GPIO_PIN_SENSE_LOW);
nrf_gpio_cfg_sense_input(15, NRF_GPIO_PIN_PULLUP, NRF_GPIO_PIN_SENSE_LOW);
if(nrf_gpio_pin_read(15) != 0 && nrf_gpio_pin_read(14) !=0)
{
APP_ERROR_CHECK(sd_power_system_off());
}