This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts

Unable to convert to Long Range after looking at umpteen examples :-(

Using SDK 15.2, PCA10056 Dev Kit. Segger Embedded Studio. s140_nrf52_6.1.0_softdevice.hex


Our Code (non Long Range) works perfectly! We are using it in a test for a customer. The code is based on the UART example.
However, we want more range, and want to test Long Range.

Note: I am NOT experienced in this field, but managed to get the existing code working after 8 weeks of work.
We do not have this amount of time to spend now...


For weeks I have looked at at least 5 different examples, but nothing I have tried works with my code.
Part of the problem is that there seems to be many approaches to configuring for long range, and most examples are not complete.

The last example I tried to follow, is this one:
Ref 1: devzone.nordicsemi.com/.../sdk15-long-advertising-and-long-range-connect

It is supposed to show the difference between the standard UART example and the conversion to Long Range.
If I follow that example, the Peripheral returns Error = 7 (Invalid Parameter) in call to:

- ble_advertising_start(&m_advertising, BLE_ADV_MODE_FAST);
- sd_ble_gap_adv_set_configure()


What confuses, is that many examples e.g. sets
adv_params.properties.type = BLE_GAP_ADV_TYPE_EXTENDED_CONNECTABLE_NONSCANNABLE_UNDIRECTED;

but there is no sign of such code in Ref 1 above...


Please, please help converting this example to use Long Range!
Please do not just refer to general descriptions, as I have tried to follow them for weeks with no success....


Code for Advertising and Scanning from Peripheral and Central follow below:


----------------- ble_app_uart START ----------------------------------


#define APP_ADV_INTERVAL 300
#define APP_ADV_DURATION 0


BLE_ADVERTISING_DEF(m_advertising);

.....


static void on_adv_evt(ble_adv_evt_t ble_adv_evt)
{
uint32_t err_code;

switch (ble_adv_evt)
{
case BLE_ADV_EVT_FAST:
break;
case BLE_ADV_EVT_IDLE:
break;
default:
break;
}
}

....


static void advertising_init(void)
{
uint32_t err_code;
ble_advertising_init_t init;

memset(&init, 0, sizeof(init));

init.advdata.name_type = BLE_ADVDATA_FULL_NAME;
//init.advdata.include_appearance = false;
init.advdata.include_appearance = true; // Changed to True from ble_app_hrs example

// ONLY General Discovery Mode
init.advdata.flags = BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE;

init.srdata.uuids_complete.uuid_cnt = sizeof(m_adv_uuids) / sizeof(m_adv_uuids[0]);
init.srdata.uuids_complete.p_uuids = m_adv_uuids;

init.config.ble_adv_fast_enabled = true;

init.config.ble_adv_fast_interval = APP_ADV_INTERVAL;

init.config.ble_adv_fast_timeout = APP_ADV_DURATION;

init.evt_handler = on_adv_evt;

err_code = ble_advertising_init(&m_advertising, &init);
APP_ERROR_CHECK(err_code);

ble_advertising_conn_cfg_tag_set(&m_advertising, APP_BLE_CONN_CFG_TAG);
}

static void advertising_start() {

ret_code_t err_code;

err_code = ble_advertising_start(&m_advertising, BLE_ADV_MODE_FAST);
APP_ERROR_CHECK(err_code);

}


----------------- ble_app_uart END ----------------------------------

----------------- ble_app_uart_c START ----------------------------------

#define APP_BLE_CONN_CFG_TAG 1
#define SCAN_SCAN_DURATION_PAIR 3000


.....

static void scan_evt_handler(scan_evt_t cons t * p_scan_evt)
{
ret_code_t err_code;

//p_scan_evt->params.p_whitelist_adv_report->peer_addr

switch(p_scan_evt->scan_evt_id)
{

case NRF_BLE_SCAN_EVT_WHITELIST_REQUEST:
{
NRF_LOG_INFO("NRF_BLE_SCAN_EVT_WHITELIST_REQUEST");
NRF_LOG_FLUSH();

on_whitelist_req();
m_whitelist_disabled = false;
} break;


case NRF_BLE_SCAN_EVT_CONNECTING_ERROR:
{
err_code = p_scan_evt->params.connecting_err.err_code;

NRF_LOG_INFO("scan_evt_handler()>>NRF_BLE_SCAN_EVT_CONNECTING_ERROR: %d ", err_code);
NRF_LOG_FLUSH();

} break;


case NRF_BLE_SCAN_EVT_CONNECTED:
{
NRF_LOG_INFO("NRF_BLE_SCAN_EVT_CONNECTED");
NRF_LOG_FLUSH();

ble_gap_evt_connected_t const * p_connected =
p_scan_evt->params.connected.p_connected;
// Scan is automatically stopped by the connection.
NRF_LOG_INFO("Connecting to target %02x%02x%02x%02x%02x%02x",
p_connected->peer_addr.addr[0],
p_connected->peer_addr.addr[1],
p_connected->peer_addr.addr[2],
p_connected->peer_addr.addr[3],
p_connected->peer_addr.addr[4],
p_connected->peer_addr.addr[5]
);
} break;

case NRF_BLE_SCAN_EVT_SCAN_TIMEOUT:
{
NRF_LOG_INFO("NRF_BLE_SCAN_EVT_SCAN_TIMEOUT");
NRF_LOG_FLUSH();
//scan_start(); /// GOS Should Not Scan here again !
} break;

case NRF_BLE_SCAN_EVT_FILTER_MATCH:
NRF_LOG_INFO("NRF_BLE_SCAN_EVT_FILTER_MATCH");
NRF_LOG_FLUSH();
break;

case NRF_BLE_SCAN_EVT_WHITELIST_ADV_REPORT:
NRF_LOG_INFO("NRF_BLE_SCAN_EVT_WHITELIST_ADV_REPORT");
NRF_LOG_FLUSH();
break;

case NRF_BLE_SCAN_EVT_NOT_FOUND:
break;

default:
break;
}
}
....


static void scan_init()
{
ret_code_t err_code;
nrf_ble_scan_init_t init_scan;

memset(&init_scan, 0, sizeof(init_scan));

m_scan_param.timeout = SCAN_SCAN_DURATION_PAIR;

init_scan.p_scan_param = &m_scan_param;

init_scan.connect_if_match = true;
init_scan.conn_cfg_tag = APP_BLE_CONN_CFG_TAG;

err_code = nrf_ble_scan_init(&m_scan, &init_scan, scan_evt_handler);

APP_ERROR_CHECK(err_code);


err_code = nrf_ble_scan_filter_set(&m_scan, SCAN_UUID_FILTER, &m_nus_uuid);
APP_ERROR_CHECK(err_code);

err_code = nrf_ble_scan_filters_enable(&m_scan, NRF_BLE_SCAN_UUID_FILTER, false);
APP_ERROR_CHECK(err_code);


}


static void scan_start(void)
{

if (nrf_fstorage_is_busy(NULL)) // Added from ble_app_hrs_c
{
m_memory_access_in_progress = true;
return;
}


NRF_LOG_INFO("Start Scanning");
NRF_LOG_FLUSH();

ret_code_t ret;

ret = nrf_ble_scan_start(&m_scan);

APP_ERROR_CHECK(ret);

}

----------------- ble_app_uart_c END ----------------------------------

Parents Reply Children
No Data
Related