• State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 67 subscribers
  • Views 2512 views
  • Users 0 members are here
Attachments (0)
Nordic Case Info
  • Case ID: 100040
Options
This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Transmission of nRF2726 (nRF24Lu1P)

TOSHIO UCHIDA

We are looking for the sample software for transmission of nRF2726 (nRF24Lu1P). nRF2726 does not carry out transmitting operation in enhanced_shockburst_ptx_nrf24lu1p.uvproj.

Is our selection an error? Or does our operation have an error?

Please tell us the suitable soft and suitable operation method etc.

Parents
  • 0

    Thanks.

    We manufactured the dongle using nRF24LU1P. We began the checking of operations of this dongle. We would like to carry out transmitting operation of this dongle.

    We are using Development Kit of nRF24LU1P , and nRF6700. First, we loaded the software for transmission to nRF2726, and checked whether it would transmit after the power supply. We compile enhanced_shockburst_ptx_nrf24lu1p.uvproj . It was loaded to nRF2726. C:\Nordic Semiconductor\nRFgo SDK 2.3.0.10040\source_code\projects\nrfgo_sdk\enhanced_shockburst_examples\ptx\Keil\nRF24lu1p

    PC and J1 terminal of ｎRF6700 are connected by the USB cable. When the power supply was turned ON, 16 MHz of a clock operated. However, RF circuit seems not to operate. Transmitting operation is not carried out even if we push one of the eight buttons. Nothing appears on the screen of Spectrum Analyzer.

    If transmitting operation can be performed normally, it will load to the dongle which we manufactured and will check transmitting operation.

    R0011328.JPG

    R0011329.JPG

    R0011330.JPG

Reply
  • 0

    Thanks.

    We manufactured the dongle using nRF24LU1P. We began the checking of operations of this dongle. We would like to carry out transmitting operation of this dongle.

    We are using Development Kit of nRF24LU1P , and nRF6700. First, we loaded the software for transmission to nRF2726, and checked whether it would transmit after the power supply. We compile enhanced_shockburst_ptx_nrf24lu1p.uvproj . It was loaded to nRF2726. C:\Nordic Semiconductor\nRFgo SDK 2.3.0.10040\source_code\projects\nrfgo_sdk\enhanced_shockburst_examples\ptx\Keil\nRF24lu1p

    PC and J1 terminal of ｎRF6700 are connected by the USB cable. When the power supply was turned ON, 16 MHz of a clock operated. However, RF circuit seems not to operate. Transmitting operation is not carried out even if we push one of the eight buttons. Nothing appears on the screen of Spectrum Analyzer.

    If transmitting operation can be performed normally, it will load to the dongle which we manufactured and will check transmitting operation.

    R0011328.JPG

    R0011329.JPG

    R0011330.JPG

Children
No Data
Related