• State Verified Answer
  • Locked Locked
  • Replies 2 replies
  • Subscribers 67 subscribers
  • Views 2317 views
  • Users 0 members are here
Attachments (0)
Nordic Case Info
  • Case ID: 104136
Options
This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Apply voltage for DCC pin

hiren

hi, i'm new in nrf module, i use nrf51822, i'm totly confuse what voltage that i should apply on DCC pin? if i want use internal dc/dc than what the voltage and if i use LDO than what should the voltage. and can i supply vdd and DCC same voltage? Thank you

Parents
  • 0

    DCC is actually the output of the DC/DC converter, so you don't need to apply any voltage there :) It can be used to supply AVDD for example, through an external LC-filter. All this is pretty well explained in chapter 11 in the Reference Manual. The max ratings can be found in chapter 6 of the Product Specification

Reply
  • 0

    DCC is actually the output of the DC/DC converter, so you don't need to apply any voltage there :) It can be used to supply AVDD for example, through an external LC-filter. All this is pretty well explained in chapter 11 in the Reference Manual. The max ratings can be found in chapter 6 of the Product Specification

Children
No Data
Related