This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts

ble_advertising_advdata_update

Hi All. 

I am trying to use the "ble_advertising_advdata_update" function, but my compiler is giving me the following error. Which class do I need to add?

undefined reference to `ble_advertising_advdata_update


I am using SDK nRF5_SDK_15.0.0_a53641a. Advertising works ok after initialisation, but I am trying to update the manufacturer data whilst advertising.

Thanks

void advertising_update(void)
{
    ret_code_t err_code;
    uint8_t testData[8] = {0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x11, 0x22};

    ble_gap_adv_data_t adv_data2 = {
        .adv_data.p_data = testData,
        .adv_data.len = 0x08,
        .scan_rsp_data.p_data = testData,
        .scan_rsp_data.len = 0//sizeof(raw_scan_rsp_data_buffer2)
    };

    err_code = ble_advertising_advdata_update(&m_advertising, &adv_data2, true);
    APP_ERROR_CHECK(err_code);
}

Parents
  • Resurrecting this ticket as I'm trying to do the same thing now.

    The accepted answer uses ble_advertising_advdata_update()

    The documentation for ble_advertising_advdata_update() says,

    "This function can be called if you wish to reconfigure the advertising data The update will be effective even if advertising has already been started"

    (my emphasis)

    The 2nd parameter of ble_advertising_advdata_update()  is of type ble_gap_adv_data_t - for which the documentation says:

    "GAP advertising data buffers.
    The application must provide the buffers for advertisement. The memory shall reside in application RAM, and
    shall never be modified while advertising"

    (my emphasis again)

    This seems to contradict the statement that ble_advertising_advdata_update()   can be used during advertising?!

    Please clarify!

    I see that you have created a new ticket about the invalid state issue, so that question will be answered in that ticket. @ref ticket.

    Unfortunately, that seems to be a Private ticket - was the resolution relevant to this question?

    I am looking at SDK 15.3.0

  • Hi. Yes was a private ticket.

    No we couldn't get ble_advertising_advdata_update() working more than once. The device would reset on the second attempt of an update.

    I have a work around I can share with you, but it is not pretty compare to the function that should work.

    Phil

  • Basically you stop the advertising, then call a second version of your advertising_init() function but update whatever manufacturing data you want to in there.

    Then start advertising again. In our application we do this at about once per second with no problems.

    Not very efficient, but works for us. I spent ages on the ble_advertising_advdata_update() so wasn't worth spending more time on.

    sd_ble_gap_adv_stop(m_advertising.adv_handle);
    advertising_init2();
    uint32_t err_code = ble_advertising_start(&m_advertising, BLE_ADV_MODE_FAST);
    APP_ERROR_CHECK(err_code);

  • stop the advertising, then call a second version of your advertising_init() function but update whatever manufacturing data you want

    Yes - that's effectively what I did:

    let the advertising time out, then repeat the advertising_init() and advertising_start()
  • You don't need to re-initialize.  Try this snippet code from the EHAL library 

    void BleAppAdvManDataSet(uint8_t *pAdvData, int AdvLen, uint8_t *pSrData, int SrLen)
    {
    	uint32_t err;
    
    	if (pAdvData && AdvLen > 0)
    	{
    		int l = min(AdvLen, BLE_GAP_ADV_SET_DATA_SIZE_MAX);
    
    		memcpy(g_BleAppData.ManufData.data.p_data, pAdvData, l);
    
    		g_BleAppData.ManufData.data.size = l;
            g_AdvInstance.adv_data.adv_data.len = BLE_GAP_ADV_SET_DATA_SIZE_MAX;
    
            err = ble_advdata_encode(&g_BleAppData.AdvData, g_AdvInstance.adv_data.adv_data.p_data, &g_AdvInstance.adv_data.adv_data.len);
    		APP_ERROR_CHECK(err);
    
    	}
    
    	if (pSrData && SrLen > 0)
    	{
    		int l = min(SrLen, BLE_GAP_ADV_SET_DATA_SIZE_MAX);
    
    		memcpy(g_BleAppData.SRManufData.data.p_data, pSrData, l);
    
    		g_BleAppData.SRManufData.data.size = l;
    		g_AdvInstance.adv_data.scan_rsp_data.len = BLE_GAP_ADV_SET_DATA_SIZE_MAX;
    
    		uint32_t err = ble_advdata_encode(&g_BleAppData.SrData, g_AdvInstance.adv_data.scan_rsp_data.p_data,
    										 &g_AdvInstance.adv_data.scan_rsp_data.len);
    		APP_ERROR_CHECK(err);
    	}
    
    	// SDK15 doesn't allow dynamicaly updating adv data.  Have to stop and re-start advertising
    	if (g_BleAppData.bAdvertising == true)
    	{
    		sd_ble_gap_adv_stop(g_AdvInstance.adv_handle);
    	}
    
    	err = sd_ble_gap_adv_set_configure(&g_AdvInstance.adv_handle, &g_AdvInstance.adv_data, NULL);
    	APP_ERROR_CHECK(err);
    
    	if (g_BleAppData.bAdvertising == true)
    	{
    		g_BleAppData.bAdvertising = false;
    		BleAppAdvStart(BLEAPP_ADVMODE_FAST);
    	}
    
    }
    

  • You mean instead of

    advertising_init();
    advertising_start();
    

    do

    BleAppAdvManDataSet();
    advertising_start();

    ?

  • Try this snippet code from the EHAL library

    Hmmm ... you have:

    err = ble_advdata_encode( &g_BleAppData.AdvData, 
                              g_AdvInstance.adv_data.adv_data.p_data,    // ***
                              &g_AdvInstance.adv_data.adv_data.len    );

    But the Nordic original has

    ret = ble_advdata_encode( &p_init->advdata, 
                              p_advertising->enc_advdata,              // ***
                              &p_advertising->adv_data.adv_data.len );

    So what's the significance of using adv_data.adv_data.p_data vs enc_adv_data ?

Reply
  • Try this snippet code from the EHAL library

    Hmmm ... you have:

    err = ble_advdata_encode( &g_BleAppData.AdvData, 
                              g_AdvInstance.adv_data.adv_data.p_data,    // ***
                              &g_AdvInstance.adv_data.adv_data.len    );

    But the Nordic original has

    ret = ble_advdata_encode( &p_init->advdata, 
                              p_advertising->enc_advdata,              // ***
                              &p_advertising->adv_data.adv_data.len );

    So what's the significance of using adv_data.adv_data.p_data vs enc_adv_data ?

Children
No Data
Related