MESH - cant finish the provision process

[yoavshtainer]

Hi all!

I'm trying to run the light_switch example (client and server), and i cant complete the provision process.

I'm using my phone and Nordic app for provision, when i run in debug mode on the client i get this error:

<t:    1596608>, app_error_weak.c,   96, Softdevice assert: 86738:0

Any help will appreciate,

Yoav

[Joakim Jakobsen]

Hi Yoav.

Which version of the Mesh SDK are you using?

Best regards.

[yoavshtainer]

Hi joakim,

I'm using nRF5_SDK_15.2.0_9412b96 SDK and mesh SDK V3

When i check it more, i see that the unit's get this error, and if i do a manual reset the node in the network and work fine.

So, the problem is only in the provision process according to my understanding.   

[Joakim Jakobsen]

Hi again.

Sorry about the delay.

I've tested this, but I can't seem to be able to reproduce it.

You didn't make any changes to the client example?

yoavshtainer said:

and if i do a manual reset the node in the network and work fine.

 So, after the reset the provisioning is successful and the node is connected to the network and behaving as expected?
Are you able to configure the node using the phone after the provisioning and reset?

Best regards,

[Joakim Jakobsen]

Which phone are you using for the provisioning?

[yoavshtainer]

It's work like expected after reset. i'm using Red mi note 4.

this don't work with your provision code.

[Joakim Jakobsen]

yoavshtainer said:

this don't work with your provision code.

 What do you mean?
 Doesn't the provisioning work using our provisioning example?

[yoavshtainer]

No, the provisioning example stuck.

See screenshots below.