Using pc-ble-driver v6 for s140: Failed to open nRF BLE Driver. Error code: 0x0D

[paul.varghese]

Hello,

I tried to use use pc-ble-driver for Ublox NINA B3 EVK which has nRF524840.

It failed with following error:

./heart_rate_monitor_v6 /dev/ttyACM0
Serial port used: /dev/ttyACM0
Baud rate used: 1000000
Info: Successfully opened /dev/ttyACM0. Baud rate: 1000000. Flow control: none. Parity: none.

Status: 6, message: Target Reset performed
Status: 0, message: No response from device. Tried to send packet 6 times.
Failed to open nRF BLE Driver. Error code: 0x0D

0x0D is a timeout:

#define NRF_ERROR_TIMEOUT                     (NRF_ERROR_BASE_NUM + 13) ///< Operation timed out

Steps I followed to test pc-ble-driver:

1. I compiled the pc-ble-driver by following the instructions in https://github.com/NordicSemiconductor/pc-ble-driver#Compiling-pc-ble-driver-from-source

$ cmake \
    -G "Unix Makefiles" \
    -DCMAKE_TOOLCHAIN_FILE=$VCPKG_ROOT/scripts/buildsystems/vcpkg.cmake \
    -DCMAKE_BUILD_TYPE=Debug \
    -DARCH=x86_32,x86_64 \
    ..

$ make

2. After that I compiled the connectivity hex using the following command:

$ cmake \
    -G "Unix Makefiles" \
    -DCMAKE_TOOLCHAIN_FILE=$VCPKG_ROOT/scripts/buildsystems/vcpkg.cmake \
    -DCOMPILE_CONNECTIVITY=1 \
    -DCONNECTIVITY_VERSION=15.2.0 \
    ..

$ make compile_connectivity

3. After that I programmed the connectivity hex (sd_api_v6/connectivity_15.2.0_1m_with_s140_6.1.0.hex) to the device, since baud rate used by heart_rate_monitor_v6  is 1000000. I also tried using the nrfjprog to flash the connectivity hex.

4. Last I ran the ./heart_rate_monitor_v6 /dev/ttyACM0

Note: BLE App in nrfConnect for desktop also fails with the following error:

Failed to open the nRF5 BLE driver.
terminate called after throwing an instance of 'std::length_error'
what(): basic_string::_S_create

Am I doing something wrong or Is pc-ble-driver for s140 (v6) still not stable to be used in application? Can someone please help me out with this?

Thanks in advance,

Paul Varghese

[Einar Thorsrud]

Hi Paul,

There is no release of the pc-ble-driver using version 6 API. As you see there is ongoing work, but I would not use it yet. It is probably better to wait and stick with version 3 API and S132 for now.

Einar

[Hamed Rafi]

Hi Einar,

I wonder if there is an update to this matter? Since the new pc-ble-driver v4.1.1 is supporting SoftDevice v6.1.1 but I still get the same error with s140 from latest SDK:
Status: 0, message: No response from device. Tried to send packet 6 times.
Failed to open nRF BLE Driver. Error code: 0x0D

Can you please provide new information on this?