nRF52832 regulation under EN 300 328

[LarsAlten]

Hi!

We are developing an IoT device using the nRF52832. 2 years ago in this thread, https://devzone.nordicsemi.com/f/nordic-q-a/27099/nrf52832-ble-certification-under-etsi-en-300-328/106588#106588 Nordic released an pre-filled version of Annex E from EN 300 328 v 1.8.1 with information on the 52832.

We are now at EN 300 328 v 2.1.1, is the same pre-filled form still valid, or if not, could Nordic perhaps release an updated version?

[ketiljo]

The v.2.1.1 form is more or less identical. There are a few extra sections at the end, from letter q) to t):

q) and r) are for FHSS which doesn't apply for BLE.

s) is application dependent

t) PER less than or equal to 10%

[LarsAlten]

Can you clarify t) ?

t) says in v2.1.1 "Describe the minimum performance criteria that apply to the equipment (see clause 4.3.1.12.3 or clause 4.3.2.11.3)"

[ketiljo]

The minimum performance criteria is that the packet loss, PER, shall be less or equal to 10% when the blocker is present.