I followed the getting started guide but the kit can't connect. I'm getting this error:
net_if.net_if_init: There is no network interface to work with!
Is this a known bug, how can i fix it? Or is there a hardware issue?
I'm seeing the same issue on my kit as well.
Ok, I've been working further and I've set up the SDK. I updated the modem firmware with the update tool and I reflashed the demo firmware. Even after 30 minutes only LED3 flashing.I have now flashed the AT command firmware to find out the kit is not receiving any networks:
My location is Belgium at the coast. There should be LTE+M and NB-IoT range of 3 providers. Is there any harware issue?Kind regards,
are you using the iBasis Sim card that came with the nRF91 DK or do you have your own SIM? If its the first, have you activated it through the nRF Cloud site? I see that the UICC box in the LTE Link monitor is red, so that could indicate that there is something with the SIM.
I used the iBasis SIM card and activated the card. The UICC box was red because I didn't issue the AT%XSIM? command. This is the box after the issue:
Ok, could you try to flash the attached hex file using the following command
nrfjprog --program zephyt_at_client.hex --sectorerase -r -f nrf91 --verify
and see if can connect to a network?