• State Verified Answer
  • Locked Locked
  • Replies 3 replies
  • Subscribers 67 subscribers
  • Views 2356 views
  • Users 0 members are here
Attachments (0)
Nordic Case Info
  • Case ID: 104195
Options
This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Getting RSSI from RFID trought serial comunication.

HIALSRoffe

Hi, We are a couple of students from Norway trying to get RSSI from an active RFID system we got from ebay.

We have now connected the tranceiver module to our PC running w7. Driver installed and comport ready for use. When we reveive data from the tags using "Termite 3.1" serial com software, we can not find any way to get the RSSI (signal strength) from the RFID tags.

Receiving this static info from tags: "fb 10 00 00 02 0f 08 01 û......."

Link to devices we ordered on ebay: www.ebay.com/.../291030234506

Parents
  • 0

    We are running a project to to use RFID as local positioning system, and thought from the description of the device we could use this. The reason we posted on this forum is that the device use NRF24LE1 chip.

    Is there any other method we can use for trilateration or positioning. Maybe one of the following:

    • Time of Arrival (ToA);
    • Time Difference of Arrival (TDoA);
    • Angle of Arrival (AoA);
Reply
  • 0

    We are running a project to to use RFID as local positioning system, and thought from the description of the device we could use this. The reason we posted on this forum is that the device use NRF24LE1 chip.

    Is there any other method we can use for trilateration or positioning. Maybe one of the following:

    • Time of Arrival (ToA);
    • Time Difference of Arrival (TDoA);
    • Angle of Arrival (AoA);
Children
Related