• State Verified Answer
  • Replies 3 replies
  • Subscribers 67 subscribers
  • Views 1536 views
  • Users 0 members are here
Attachments (0)
Nordic Case Info
  • Case ID: 220190
Options
This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts

Mesh OTA

Igor

nRF Connect for Android reports an error (Device disconnected) when trying to initiate Mesh DFU.
Does this app support Mesh OTA at all?

Parents
  • +1

    As of now, you will need to do a mesh dfu via the serial example & the process explained here. I am not sure if there is any plan for integrating Mesh DFU in the nRF Mesh app currently. The reason is that for large scale applications, it makes more sense to use a PC to provision & configure the mesh network, as you can easily backup the provisioning/configuration data (via the interactive pyaci script). Of course it would be a lot easier to configure the DFU via a smartphone application, like it is being done in nRF Connect for iOS/Android.

Reply
  • +1

    As of now, you will need to do a mesh dfu via the serial example & the process explained here. I am not sure if there is any plan for integrating Mesh DFU in the nRF Mesh app currently. The reason is that for large scale applications, it makes more sense to use a PC to provision & configure the mesh network, as you can easily backup the provisioning/configuration data (via the interactive pyaci script). Of course it would be a lot easier to configure the DFU via a smartphone application, like it is being done in nRF Connect for iOS/Android.

Children
Related