Hi there,
I am porting the the app_button from the ble_blinky project to my own project which uses BLE functionality too, and it is not firing the button_event_handler after pressed a button.
I am calling initialize() from my main.c to initialize the timer, leds and buttons
below my code:
#define NRF_LOG_MODULE_NAME Peripheral
#include "nrf_log.h"
#include "nrf_log_ctrl.h"
NRF_LOG_MODULE_REGISTER();
#include "peripheral.h" // header for the functions here
#include "boards.h"
#include "app_timer.h"
#include "app_button.h"
#define LEDBUTTON_BUTTON BSP_BUTTON_0 /**< Button that will trigger the notification event with the LED Button Service */
#define BUTTON_DETECTION_DELAY APP_TIMER_TICKS(50) /**< Delay from a GPIOTE event until a button is reported as pushed (in number of timer ticks). */
static void timers_init(void)
{
ret_code_t err_code = app_timer_init();
APP_ERROR_CHECK(err_code);
}
static void leds_init(void)
{
bsp_board_init(BSP_INIT_LEDS);
}
static void button_event_handler(uint8_t pin_no, uint8_t button_action)
{
ret_code_t err_code;
NRF_LOG_INFO("button_event_handler");
switch (pin_no)
{
case LEDBUTTON_BUTTON:
NRF_LOG_INFO("Button .");
break;
default:
APP_ERROR_HANDLER(pin_no);
break;
}
}
static void buttons_init(void)
{
ret_code_t err_code;
static app_button_cfg_t buttons[] =
{
{ LEDBUTTON_BUTTON, false, BUTTON_PULL, button_event_handler }
};
err_code = app_button_init(buttons, ARRAY_SIZE(buttons),BUTTON_DETECTION_DELAY);
APP_ERROR_CHECK(err_code);
}
void initialize()
{
leds_init();
timers_init();
buttons_init();
app_button_enable();
}
SDK15.2
sdk_config:.
NRFX_CLOCK_ENABLED 1
NRFX_GPIOTE_ENABLED 1
APP_TIMER_ENABLED 1
BUTTON_ENABLED 1
I added nrf_drv_clock.c ,nrfx_clock.c, nrfx_gpiote.c, app_button.c, app_timer.c and their headers to my project with no luck
if someone can give me an advise, thanks in advance
