unable to connect nRF91 dk

[avm]

trying to bring up the new nRF91 dk with default firmware.

Registered the eSIM. switch sequnce activated with LED 3 and 4 starts blinking. After that LED4 starts blinking and never goes to solid ON. Around 5mins later, the board reboots. Here is the log. 

***** Booting Zephyr OS kitprod_w49 *****

Application started 

LTE LC config ...

[00:00:00.942,687]

[1;31m<err> net_if.net_if_init: There is no network interface to work with!

 [0m

 NRF_CLOUD_EVT_TRANSPORT_CONNECTED

 NRF_CLOUD_EVT_USER_ASSOCIATION_REQUEST

Please enter the user association pattern using the buttons and switches

Button 1

Switch 2

Button 2

Switch 2

Button 2

Switch 1

NRF_CLOUD_EVT_TRANSPORT_DISCONNECTED

nrf_cloud_connect failed: 60

***** Booting Zephyr OS v1.13.99-ncs1-1823-g715d2df3dd *****

Secure Boot: configure flash

[Martin Lesund]

Hi avm,

I am sorry that you are experiencing this.

I have two quick suggestions to try out:

1. Update to the latest modem firmware

2. Try to flash this Asset_tracker application:

 asset_tracker_updated.hex

(with nrfjprog: nrfjprog --program asset_tracker_updated.hex -f nrf91 -r --sectorerase --verify)

Let me know how it goes.

//Cheers

[GJSea]

Hmm I'm getting this now too with the above asset_tracker_updated.hex file, here's my output from the Link Monitor 

***** Booting Zephyr OS v1.13.99-ncs1-4488-ga76f833d24 *****

Application started
LTE LC config ...
nrf_cloud_connect failed: 60

Any idea? Thx!

[AndyL]

I do have the same issue here. Sometimes the asset tracker is able to connect but after a couple of second, it throws this error: 

NRF_CLOUD_EVT_TRANSPORT_DISCONNECTED

It was all working without any issues before updating to the newest modem. The at_command example runs without any issue. Is the asset tracker not compatible with the 0.6.8 modem? Is it possible to get an old modem version?

Thanks!

[AndyL]

It looks like there was a issue with the secure boot. I've rebuilt and reflashed the secure boot and it's working.

[AndyL]

It looks like there was a issue with the secure boot. I've rebuilt and reflashed the secure boot and it's working.

[AndyL]

It looks like there was a issue with the secure boot. I've rebuilt and reflashed the secure boot and it's working.S