This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

advertising to pre shared irk

i need a help

As mentioned in this thread

https://devzone.nordicsemi.com/f/nordic-q-a/18512/directed-advertising-with-pre-shared-irk

in need to do directed advertising with pre shared irk

this is my code where should i add on the peripheral side

#include <stdint.h>
#include <string.h>

#include "ble_advertising.h"
#include "nordic_common.h"
#include "nrf.h"
#include "nrf_soc.h"
#include "nrf_drv_saadc.h"
#include "nrf_sdm.h"
#include "app_error.h"
#include "ble.h"
#include "ble_err.h"
#include "ble_hci.h"
#include "ble_srv_common.h"
#include "ble_advdata.h"
#include "ble_tps.h"
#include "ble_ias.h"
#include "ble_lls.h"
#include "ble_bas.h"
#include "ble_conn_params.h"
#include "ble_conn_state.h"
#include "sensorsim.h"
#include "nrf_sdh.h"
#include "nrf_sdh_soc.h"
#include "nrf_sdh_ble.h"
#include "app_timer.h"
#include "app_error.h"
#include "ble_ias_c.h"
#include "app_util.h"
#include "bsp_btn_ble.h"
#include "ble_db_discovery.h"
#include "peer_manager.h"
#include "peer_manager_handler.h"
#include "fds.h"
#include "ble_conn_state.h"
#include "nrf_ble_gatt.h"
#include "nrf_ble_lesc.h"
#include "nrf_ble_qwr.h"
//#include "nrf_ble_scan.h"
#include "nrf_pwr_mgmt.h"
#include "nrf_fstorage.h"

#include "nrf_log.h"
#include "nrf_log_ctrl.h"
#include "nrf_log_default_backends.h"


#define DEVICE_NAME                     "NORDIC"                           

#define APP_BLE_OBSERVER_PRIO           3                                       
#define APP_BLE_CONN_CFG_TAG            1                                       

#define BATTERY_LEVEL_MEAS_INTERVAL     APP_TIMER_TICKS(120000)                 

#define MIN_CONN_INTERVAL               MSEC_TO_UNITS(500, UNIT_1_25_MS)        
#define MAX_CONN_INTERVAL               MSEC_TO_UNITS(1000, UNIT_1_25_MS)       
#define SLAVE_LATENCY                   0                                       
#define CONN_SUP_TIMEOUT                MSEC_TO_UNITS(4000, UNIT_10_MS)         

//#define APP_ADV_INTERVAL                40                                       
#define NON_CONNECTABLE_ADV_INTERVAL    MSEC_TO_UNITS(100, UNIT_0_625_MS)  

#define APP_ADV_DURATION                18000                                    

#define FIRST_CONN_PARAMS_UPDATE_DELAY  APP_TIMER_TICKS(5000)                   
#define NEXT_CONN_PARAMS_UPDATE_DELAY   APP_TIMER_TICKS(30000)                  
#define MAX_CONN_PARAMS_UPDATE_COUNT    3                                       

#define SEC_PARAM_BOND                  1                                       
#define SEC_PARAM_MITM                  0                                       
#define SEC_PARAM_LESC                  0                                       
#define SEC_PARAM_KEYPRESS              0                                       
#define SEC_PARAM_IO_CAPABILITIES       BLE_GAP_IO_CAPS_NONE                    
#define SEC_PARAM_OOB                   0                                       
#define SEC_PARAM_MIN_KEY_SIZE          7                                       
#define SEC_PARAM_MAX_KEY_SIZE          16                                      

#define INITIAL_LLS_ALERT_LEVEL         BLE_CHAR_ALERT_LEVEL_NO_ALERT           
#define TX_POWER_LEVEL                  (-8)                                    

#define ADC_REF_VOLTAGE_IN_MILLIVOLTS   600                                     
#define ADC_PRE_SCALING_COMPENSATION    6                                       
#define DIODE_FWD_VOLT_DROP_MILLIVOLTS  270                                     
#define ADC_RES_10BIT                   1024                                    

#define DEAD_BEEF                       0xDEADBEEF                              

#define APP_BEACON_INFO_LENGTH          0x17                               
#define APP_ADV_DATA_LENGTH             0x15                               
#define APP_DEVICE_TYPE                 0x02                               
#define APP_MEASURED_RSSI               0xC5                               
#define APP_COMPANY_IDENTIFIER          0x004C                             
#define APP_MAJOR_VALUE                 0x00, 0x02                         
#define APP_MINOR_VALUE                 0x00, 0x02                         
#define APP_BEACON_UUID                 0x01, 0x12, 0x23, 0x34, \
                                        0x45, 0x56, 0x67, 0x78, \
                                        0x89, 0x9a, 0xab, 0xbc, \
                                        0xcd, 0xde, 0xef, 0xf0            

#if defined(USE_UICR_FOR_MAJ_MIN_VALUES)
#define MAJ_VAL_OFFSET_IN_BEACON_INFO   18                                
#define UICR_ADDRESS                    0x10001080                         
#endif


#define ADC_RESULT_IN_MILLI_VOLTS(ADC_VALUE)\
        ((((ADC_VALUE) * ADC_REF_VOLTAGE_IN_MILLIVOLTS) / ADC_RES_10BIT) * ADC_PRE_SCALING_COMPENSATION)


APP_TIMER_DEF(m_battery_timer_id);                      
BLE_TPS_DEF(m_tps);                                     
BLE_IAS_DEF(m_ias, NRF_SDH_BLE_TOTAL_LINK_COUNT);       
BLE_LLS_DEF(m_lls);                                     
BLE_BAS_DEF(m_bas);                                     
BLE_IAS_C_DEF(m_ias_c);                                 
NRF_BLE_GATT_DEF(m_gatt);                               
NRF_BLE_QWR_DEF(m_qwr);                                 
BLE_ADVERTISING_DEF(m_advertising);                     
BLE_DB_DISCOVERY_DEF(m_ble_db_discovery);               

static volatile bool m_is_high_alert_signalled;         
static volatile bool m_is_ias_present = false;          

static nrf_saadc_value_t adc_buf[2];

static ble_uuid_t m_adv_uuids[] =                       
{
    {BLE_UUID_IMMEDIATE_ALERT_SERVICE, BLE_UUID_TYPE_BLE},
    {BLE_UUID_BATTERY_SERVICE, BLE_UUID_TYPE_BLE},
    {BLE_UUID_TX_POWER_SERVICE, BLE_UUID_TYPE_BLE},
    {BLE_UUID_LINK_LOSS_SERVICE, BLE_UUID_TYPE_BLE}
};

static ble_gap_adv_params_t m_adv_params;                                  
static uint8_t              m_adv_handle = BLE_GAP_ADV_SET_HANDLE_NOT_SET; 
static uint8_t              m_enc_advdata[BLE_GAP_ADV_SET_DATA_SIZE_MAX];  
static uint8_t              m_enc_scandata[BLE_GAP_ADV_SET_DATA_SIZE_MAX];  


static ble_gap_adv_data_t m_adv_data =
{
    .adv_data =
    {
        .p_data = m_enc_advdata,
        .len    = BLE_GAP_ADV_SET_DATA_SIZE_MAX
    },
    .scan_rsp_data =
    {
        .p_data = m_enc_scandata,
        .len    = BLE_GAP_ADV_SET_DATA_SIZE_MAX

    }
};




static uint8_t m_beacon_info[APP_BEACON_INFO_LENGTH] =                    
{
    APP_DEVICE_TYPE,     
                         
    APP_ADV_DATA_LENGTH, 
                         
    APP_BEACON_UUID,     
    APP_MAJOR_VALUE,     
    APP_MINOR_VALUE,     
    APP_MEASURED_RSSI    
                         
};


static void on_ias_evt(ble_ias_t * p_ias, ble_ias_evt_t * p_evt);
static void on_lls_evt(ble_lls_t * p_lls, ble_lls_evt_t * p_evt);
static void on_ias_c_evt(ble_ias_c_t * p_lls, ble_ias_c_evt_t * p_evt);
static void on_bas_evt(ble_bas_t * p_bas, ble_bas_evt_t * p_evt);
static void advertising_init(void);
static void advertising_start(bool erase_bonds);



void assert_nrf_callback(uint16_t line_num, const uint8_t * p_file_name)
{
    app_error_handler(DEAD_BEEF, line_num, p_file_name);
}



static void service_error_handler(uint32_t nrf_error)
{
    APP_ERROR_HANDLER(nrf_error);
}



static void pm_evt_handler(pm_evt_t const * p_evt)
{
    pm_handler_on_pm_evt(p_evt);
    pm_handler_flash_clean(p_evt);

    switch (p_evt->evt_id)
    {
        case PM_EVT_PEERS_DELETE_SUCCEEDED:
            advertising_start(false);
            break;

        default:
            break;
    }
}



void saadc_event_handler(nrf_drv_saadc_evt_t const * p_event)
{
    if (p_event->type == NRF_DRV_SAADC_EVT_DONE)
    {
        nrf_saadc_value_t adc_result;
        uint16_t          batt_lvl_in_milli_volts;
        uint8_t           percentage_batt_lvl;
        uint32_t          err_code;

        adc_result = p_event->data.done.p_buffer[0];

        err_code = nrf_drv_saadc_buffer_convert(p_event->data.done.p_buffer, 1);
        APP_ERROR_CHECK(err_code);

        batt_lvl_in_milli_volts = ADC_RESULT_IN_MILLI_VOLTS(adc_result) +
                                  DIODE_FWD_VOLT_DROP_MILLIVOLTS;
        percentage_batt_lvl = battery_level_in_percent(batt_lvl_in_milli_volts);

        err_code = ble_bas_battery_level_update(&m_bas, percentage_batt_lvl, BLE_CONN_HANDLE_ALL);
        if ((err_code != NRF_SUCCESS) &&
            (err_code != NRF_ERROR_INVALID_STATE) &&
            (err_code != NRF_ERROR_RESOURCES) &&
            (err_code != NRF_ERROR_BUSY) &&
            (err_code != BLE_ERROR_GATTS_SYS_ATTR_MISSING)
           )
        {
            APP_ERROR_HANDLER(err_code);
        }
    }
}



static void db_disc_handler(ble_db_discovery_evt_t * p_evt)
{
    ble_ias_c_on_db_disc_evt(&m_ias_c, p_evt);
}



static void adc_configure(void)
{
    ret_code_t err_code = nrf_drv_saadc_init(NULL, saadc_event_handler);
    APP_ERROR_CHECK(err_code);

    nrf_saadc_channel_config_t config =
        NRF_DRV_SAADC_DEFAULT_CHANNEL_CONFIG_SE(NRF_SAADC_INPUT_VDD);
    err_code = nrf_drv_saadc_channel_init(0, &config);
    APP_ERROR_CHECK(err_code);

    err_code = nrf_drv_saadc_buffer_convert(&adc_buf[0], 1);
    APP_ERROR_CHECK(err_code);

    err_code = nrf_drv_saadc_buffer_convert(&adc_buf[1], 1);
    APP_ERROR_CHECK(err_code);
}



static void battery_level_meas_timeout_handler(void * p_context)
{
    UNUSED_PARAMETER(p_context);

    ret_code_t err_code;
    err_code = nrf_drv_saadc_sample();
    APP_ERROR_CHECK(err_code);
}



static void timers_init(void)
{
    ret_code_t err_code;

    
    err_code = app_timer_init();
    APP_ERROR_CHECK(err_code);

    
    err_code = app_timer_create(&m_battery_timer_id,
                                APP_TIMER_MODE_REPEATED,
                                battery_level_meas_timeout_handler);
    APP_ERROR_CHECK(err_code);
}



static void gap_params_init(void)
{
    ret_code_t              err_code;
    ble_gap_conn_params_t   gap_conn_params;
    ble_gap_conn_sec_mode_t sec_mode;

    BLE_GAP_CONN_SEC_MODE_SET_OPEN(&sec_mode);

    err_code = sd_ble_gap_device_name_set(&sec_mode,
                                          (const uint8_t *)DEVICE_NAME,
                                          strlen(DEVICE_NAME));
    APP_ERROR_CHECK(err_code);

    err_code = sd_ble_gap_appearance_set(BLE_APPEARANCE_GENERIC_KEYRING);
    APP_ERROR_CHECK(err_code);

    memset(&gap_conn_params, 0, sizeof(gap_conn_params));

    gap_conn_params.min_conn_interval = MIN_CONN_INTERVAL;
    gap_conn_params.max_conn_interval = MAX_CONN_INTERVAL;
    gap_conn_params.slave_latency     = SLAVE_LATENCY;
    gap_conn_params.conn_sup_timeout  = CONN_SUP_TIMEOUT;

    err_code = sd_ble_gap_ppcp_set(&gap_conn_params);
    APP_ERROR_CHECK(err_code);
}



static void gatt_init(void)
{
    ret_code_t err_code = nrf_ble_gatt_init(&m_gatt, NULL);
    APP_ERROR_CHECK(err_code);
}



static void sleep_mode_enter(void)
{
    ret_code_t err_code;

    err_code = bsp_indication_set(BSP_INDICATE_IDLE);
    APP_ERROR_CHECK(err_code);

    
    err_code = bsp_btn_ble_sleep_mode_prepare();
    APP_ERROR_CHECK(err_code);

    
    err_code = sd_power_system_off();
    APP_ERROR_CHECK(err_code);
}



static void on_adv_evt(ble_adv_evt_t ble_adv_evt)
{
    ret_code_t err_code;

    switch (ble_adv_evt)
    {
        case BLE_ADV_EVT_FAST:
            NRF_LOG_INFO("Fast advertising.");
            err_code = bsp_indication_set(BSP_INDICATE_ADVERTISING);
            APP_ERROR_CHECK(err_code);
            break; // BLE_ADV_EVT_FAST

        case BLE_ADV_EVT_IDLE:
            sleep_mode_enter();
            break; // BLE_ADV_EVT_IDLE

        default:
            break;
    }
}



static void delete_bonds(void)
{
    ret_code_t err_code;

    NRF_LOG_INFO("Erase bonds!");

    err_code = pm_peers_delete();
    APP_ERROR_CHECK(err_code);
}


static void advertising_init(void)
{
    uint32_t      err_code;
    ble_advdata_t advdata;
    ble_advdata_t scandata;
    uint8_t       flags = BLE_GAP_ADV_FLAG_BR_EDR_NOT_SUPPORTED;

    ble_advdata_manuf_data_t manuf_specific_data;

    manuf_specific_data.company_identifier = APP_COMPANY_IDENTIFIER;

#if defined(USE_UICR_FOR_MAJ_MIN_VALUES)

    uint16_t major_value = ((*(uint32_t *)UICR_ADDRESS) & 0xFFFF0000) >> 16;
    uint16_t minor_value = ((*(uint32_t *)UICR_ADDRESS) & 0x0000FFFF);

    uint8_t index = MAJ_VAL_OFFSET_IN_BEACON_INFO;

    m_beacon_info[index++] = MSB_16(major_value);
    m_beacon_info[index++] = LSB_16(major_value);

    m_beacon_info[index++] = MSB_16(minor_value);
    m_beacon_info[index++] = LSB_16(minor_value);
#endif

    manuf_specific_data.data.p_data = (uint8_t *) m_beacon_info;
    manuf_specific_data.data.size   = APP_BEACON_INFO_LENGTH;


    memset(&advdata, 0, sizeof(advdata));

    advdata.name_type             = BLE_ADVDATA_NO_NAME;
    advdata.flags                 = flags;
    advdata.p_manuf_specific_data = &manuf_specific_data;


    memset(&m_adv_params, 0, sizeof(m_adv_params));

    m_adv_params.properties.type = BLE_GAP_ADV_TYPE_CONNECTABLE_SCANNABLE_UNDIRECTED;
    m_adv_params.p_peer_addr     = NULL;    
    m_adv_params.filter_policy   = BLE_GAP_ADV_FP_ANY;
    m_adv_params.interval        = NON_CONNECTABLE_ADV_INTERVAL;
    m_adv_params.duration        = 0;       

    err_code = ble_advdata_encode(&advdata, m_adv_data.adv_data.p_data, &m_adv_data.adv_data.len);
    APP_ERROR_CHECK(err_code);


    memset(&scandata, 0, sizeof(scandata));

    scandata.name_type             = BLE_ADVDATA_FULL_NAME;
    scandata.uuids_complete.uuid_cnt = sizeof(m_adv_uuids) / sizeof(m_adv_uuids[0]);
    scandata.uuids_complete.p_uuids  = m_adv_uuids;

    ble_gap_addr_t gap_address;
    gap_address.addr_type = BLE_GAP_ADDR_TYPE_PUBLIC;
    memcpy(&gap_address.addr, "\xbb\xaa\xcc\xbb\xaa\xAC", sizeof(gap_address.addr));
    err_code = sd_ble_gap_addr_set(&gap_address);
    APP_ERROR_CHECK(err_code);

    err_code = ble_advdata_encode(&scandata, m_adv_data.scan_rsp_data.p_data, &m_adv_data.scan_rsp_data.len);
    APP_ERROR_CHECK(err_code);

    err_code = sd_ble_gap_adv_set_configure(&m_adv_handle, &m_adv_data, &m_adv_params);
    APP_ERROR_CHECK(err_code);
}



static void advertising_start(bool erase_bonds)
{
    ret_code_t err_code;
    if (erase_bonds == true){
        delete_bonds();
        
    }
    else
    {
        err_code = sd_ble_gap_adv_start(m_adv_handle, APP_BLE_CONN_CFG_TAG);
        APP_ERROR_CHECK(err_code);

        err_code = bsp_indication_set(BSP_INDICATE_ADVERTISING);
        APP_ERROR_CHECK(err_code);
    }
    

    
}

///**@brief Function for initializing the Advertising functionality.
// *
// * @details Encodes the required advertising data and passes it to the stack.
// *          Also builds a structure to be passed to the stack when starting advertising.
// */
//static void advertising_init(void)
//{
//    ret_code_t             err_code;
//    ble_advertising_init_t init;
//
//    memset(&init, 0, sizeof(init));
//
//    init.advdata.name_type               = BLE_ADVDATA_FULL_NAME;
//    init.advdata.include_appearance      = true;
//    init.advdata.flags                   = BLE_GAP_ADV_FLAGS_LE_ONLY_LIMITED_DISC_MODE;
//    init.advdata.uuids_complete.uuid_cnt = sizeof(m_adv_uuids) / sizeof(m_adv_uuids[0]);
//    init.advdata.uuids_complete.p_uuids  = m_adv_uuids;
//
//    init.config.ble_adv_fast_enabled  = true;
//    init.config.ble_adv_fast_interval = APP_ADV_INTERVAL;
//    init.config.ble_adv_fast_timeout  = APP_ADV_DURATION;
//
//    init.evt_handler = on_adv_evt;
//
//    err_code = ble_advertising_init(&m_advertising, &init);
//    APP_ERROR_CHECK(err_code);
//
//    ble_advertising_conn_cfg_tag_set(&m_advertising, APP_BLE_CONN_CFG_TAG);
//}



static void nrf_qwr_error_handler(uint32_t nrf_error)
{
    APP_ERROR_HANDLER(nrf_error);
}



static void qwr_init(void)
{
    ret_code_t         err_code;
    nrf_ble_qwr_init_t qwr_init_obj = {0};

 
    qwr_init_obj.error_handler = nrf_qwr_error_handler;

    err_code = nrf_ble_qwr_init(&m_qwr, &qwr_init_obj);
    APP_ERROR_CHECK(err_code);
}



static void tps_init(void)
{
    ret_code_t     err_code;
    ble_tps_init_t tps_init_obj;

    memset(&tps_init_obj, 0, sizeof(tps_init_obj));
    tps_init_obj.initial_tx_power_level = TX_POWER_LEVEL;

    tps_init_obj.tpl_rd_sec = SEC_JUST_WORKS;

    err_code = ble_tps_init(&m_tps, &tps_init_obj);
    APP_ERROR_CHECK(err_code);
}



static void ias_init(void)
{
    ret_code_t     err_code;
    ble_ias_init_t ias_init_obj;

    memset(&ias_init_obj, 0, sizeof(ias_init_obj));
    ias_init_obj.evt_handler  = on_ias_evt;

    ias_init_obj.alert_wr_sec = SEC_JUST_WORKS;

    err_code = ble_ias_init(&m_ias, &ias_init_obj);
    APP_ERROR_CHECK(err_code);
}



static void lls_init(void)
{
    ret_code_t     err_code;
    ble_lls_init_t lls_init_obj;

    // Initialize Link Loss Service
    memset(&lls_init_obj, 0, sizeof(lls_init_obj));

    lls_init_obj.evt_handler         = on_lls_evt;
    lls_init_obj.error_handler       = service_error_handler;
    lls_init_obj.initial_alert_level = INITIAL_LLS_ALERT_LEVEL;

    lls_init_obj.alert_level_rd_sec = SEC_JUST_WORKS;
    lls_init_obj.alert_level_wr_sec = SEC_JUST_WORKS;

    err_code = ble_lls_init(&m_lls, &lls_init_obj);
    APP_ERROR_CHECK(err_code);
}



static void bas_init(void)
{
    ret_code_t     err_code;
    ble_bas_init_t bas_init_obj;

    memset(&bas_init_obj, 0, sizeof(bas_init_obj));

    bas_init_obj.evt_handler          = on_bas_evt;
    bas_init_obj.support_notification = true;
    bas_init_obj.p_report_ref         = NULL;
    bas_init_obj.initial_batt_level   = 100;

    bas_init_obj.bl_rd_sec        = SEC_OPEN;
    bas_init_obj.bl_cccd_wr_sec   = SEC_OPEN;
    bas_init_obj.bl_report_rd_sec = SEC_OPEN;

    err_code = ble_bas_init(&m_bas, &bas_init_obj);
    APP_ERROR_CHECK(err_code);
}



static void ias_client_init(void)
{
    ret_code_t       err_code;
    ble_ias_c_init_t ias_c_init_obj;

    memset(&ias_c_init_obj, 0, sizeof(ias_c_init_obj));

    m_is_high_alert_signalled = false;

    ias_c_init_obj.evt_handler   = on_ias_c_evt;
    ias_c_init_obj.error_handler = service_error_handler;

    err_code = ble_ias_c_init(&m_ias_c, &ias_c_init_obj);
    APP_ERROR_CHECK(err_code);
}



static void services_init(void)
{
    qwr_init();
    tps_init();
    ias_init();
    lls_init();
    bas_init();
    ias_client_init();
}



static void db_discovery_init(void)
{
    ret_code_t err_code = ble_db_discovery_init(db_disc_handler);
    APP_ERROR_CHECK(err_code);
}


static void conn_params_error_handler(uint32_t nrf_error)
{
    APP_ERROR_HANDLER(nrf_error);
}



static void conn_params_init(void)
{
    ret_code_t             err_code;
    ble_conn_params_init_t cp_init;

    memset(&cp_init, 0, sizeof(cp_init));

    cp_init.p_conn_params                  = NULL;
    cp_init.first_conn_params_update_delay = FIRST_CONN_PARAMS_UPDATE_DELAY;
    cp_init.next_conn_params_update_delay  = NEXT_CONN_PARAMS_UPDATE_DELAY;
    cp_init.max_conn_params_update_count   = MAX_CONN_PARAMS_UPDATE_COUNT;
    cp_init.start_on_notify_cccd_handle    = BLE_GATT_HANDLE_INVALID;
    cp_init.disconnect_on_fail             = true;
    cp_init.evt_handler                    = NULL;
    cp_init.error_handler                  = conn_params_error_handler;

    err_code = ble_conn_params_init(&cp_init);
    APP_ERROR_CHECK(err_code);
}



static void alert_signal(uint8_t alert_level)
{
    ret_code_t err_code;

    switch (alert_level)
    {
        case BLE_CHAR_ALERT_LEVEL_NO_ALERT:
            NRF_LOG_INFO("No Alert.");
            err_code = bsp_indication_set(BSP_INDICATE_ALERT_OFF);
            APP_ERROR_CHECK(err_code);
            break; // BLE_CHAR_ALERT_LEVEL_NO_ALERT

        case BLE_CHAR_ALERT_LEVEL_MILD_ALERT:
            NRF_LOG_INFO("Mild Alert.");
            err_code = bsp_indication_set(BSP_INDICATE_ALERT_0);
            APP_ERROR_CHECK(err_code);
            break; // BLE_CHAR_ALERT_LEVEL_MILD_ALERT

        case BLE_CHAR_ALERT_LEVEL_HIGH_ALERT:
            NRF_LOG_INFO("HIGH Alert.");
            err_code = bsp_indication_set(BSP_INDICATE_ALERT_3);
            APP_ERROR_CHECK(err_code);
            break; // BLE_CHAR_ALERT_LEVEL_HIGH_ALERT

        default:

            break;
    }
}



static void on_ias_evt(ble_ias_t * p_ias, ble_ias_evt_t * p_evt)
{
    switch (p_evt->evt_type)
    {
        case BLE_IAS_EVT_ALERT_LEVEL_UPDATED:
            if (p_evt->p_link_ctx != NULL)
            {
                alert_signal(p_evt->p_link_ctx->alert_level);
            }
            break; // BLE_IAS_EVT_ALERT_LEVEL_UPDATED

        default:
            // No implementation needed.
            break;
    }
}



static void on_lls_evt(ble_lls_t * p_lls, ble_lls_evt_t * p_evt)
{
    switch (p_evt->evt_type)
    {
        case BLE_LLS_EVT_LINK_LOSS_ALERT:
            alert_signal(p_evt->params.alert_level);
            break; // BLE_LLS_EVT_LINK_LOSS_ALERT

        default:
            // No implementation needed.
            break;
    }
}




static void on_ias_c_evt(ble_ias_c_t * p_ias_c, ble_ias_c_evt_t * p_evt)
{
    ret_code_t err_code;

    switch (p_evt->evt_type)
    {
        case BLE_IAS_C_EVT_DISCOVERY_COMPLETE:
            // IAS is found on peer. The Find Me Locator functionality of this app will work.
            err_code = ble_ias_c_handles_assign(&m_ias_c,
                                                p_evt->conn_handle,
                                                p_evt->alert_level.handle_value);
            APP_ERROR_CHECK(err_code);

            m_is_ias_present = true;
            break; // BLE_IAS_C_EVT_DISCOVERY_COMPLETE

        case BLE_IAS_C_EVT_DISCOVERY_FAILED:
            // IAS is not found on peer. The Find Me Locator functionality of this app will NOT work.
            break; // BLE_IAS_C_EVT_DISCOVERY_FAILED

        case BLE_IAS_C_EVT_DISCONN_COMPLETE:
            // Disable alert buttons
            m_is_ias_present = false;
            break; // BLE_IAS_C_EVT_DISCONN_COMPLETE

        default:
            break;
    }
}



static void on_bas_evt(ble_bas_t * p_bas, ble_bas_evt_t * p_evt)
{
    ret_code_t err_code;

    switch (p_evt->evt_type)
    {
        case BLE_BAS_EVT_NOTIFICATION_ENABLED:
            // Start battery timer
            err_code = app_timer_start(m_battery_timer_id, BATTERY_LEVEL_MEAS_INTERVAL, NULL);
            APP_ERROR_CHECK(err_code);
            break; // BLE_BAS_EVT_NOTIFICATION_ENABLED

        case BLE_BAS_EVT_NOTIFICATION_DISABLED:
            err_code = app_timer_stop(m_battery_timer_id);
            APP_ERROR_CHECK(err_code);
            break; // BLE_BAS_EVT_NOTIFICATION_DISABLED

        default:
            // No implementation needed.
            break;
    }
}



static void ble_evt_handler(ble_evt_t const * p_ble_evt, void * p_context)
{
    ret_code_t err_code = NRF_SUCCESS;

    switch (p_ble_evt->header.evt_id)
    {
        case BLE_GAP_EVT_DISCONNECTED:
            NRF_LOG_INFO("Disconnected.");
            // LED indication will be changed when advertising starts.
            break;

        case BLE_GAP_EVT_CONNECTED:
        {
            NRF_LOG_INFO("Connected.");
            err_code = bsp_indication_set(BSP_INDICATE_CONNECTED);
            APP_ERROR_CHECK(err_code);

            // Assign connection handle to the Queued Write module.
            err_code = nrf_ble_qwr_conn_handle_assign(&m_qwr, p_ble_evt->evt.gap_evt.conn_handle);
            APP_ERROR_CHECK(err_code);

            // Discover peer's services.
            err_code = ble_db_discovery_start(&m_ble_db_discovery,
                                              p_ble_evt->evt.gap_evt.conn_handle);
            APP_ERROR_CHECK(err_code);
        } break;

        case BLE_GAP_EVT_PHY_UPDATE_REQUEST:
        {
            NRF_LOG_DEBUG("PHY update request.");
            ble_gap_phys_t const phys =
            {
                .rx_phys = BLE_GAP_PHY_AUTO,
                .tx_phys = BLE_GAP_PHY_AUTO,
            };
            err_code = sd_ble_gap_phy_update(p_ble_evt->evt.gap_evt.conn_handle, &phys);
            APP_ERROR_CHECK(err_code);
        } break;

        case BLE_GATTC_EVT_TIMEOUT:
            // Disconnect on GATT Client timeout event.
            NRF_LOG_DEBUG("GATT Client Timeout.");
            err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gattc_evt.conn_handle,
                                             BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
            APP_ERROR_CHECK(err_code);
            break;

        case BLE_GATTS_EVT_TIMEOUT:
            // Disconnect on GATT Server timeout event.
            NRF_LOG_DEBUG("GATT Server Timeout.");
            err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gatts_evt.conn_handle,
                                             BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
            APP_ERROR_CHECK(err_code);
            break;

        default:
            // No implementation needed.
            break;
    }
}



static void ble_stack_init(void)
{
    ret_code_t err_code;

    err_code = nrf_sdh_enable_request();
    APP_ERROR_CHECK(err_code);

    // Configure the BLE stack using the default settings.
    // Fetch the start address of the application RAM.
    uint32_t ram_start = 0;
    err_code = nrf_sdh_ble_default_cfg_set(APP_BLE_CONN_CFG_TAG, &ram_start);
    APP_ERROR_CHECK(err_code);

    // Enable BLE stack.
    err_code = nrf_sdh_ble_enable(&ram_start);
    APP_ERROR_CHECK(err_code);

    // Register a handler for BLE events.
    NRF_SDH_BLE_OBSERVER(m_ble_observer, APP_BLE_OBSERVER_PRIO, ble_evt_handler, NULL);
}


static void peer_manager_init(void)
{
    ble_gap_sec_params_t sec_param;
    ret_code_t           err_code;

    err_code = pm_init();
    APP_ERROR_CHECK(err_code);

    memset(&sec_param, 0, sizeof(ble_gap_sec_params_t));

    // Security parameters to be used for all security procedures.
    sec_param.bond           = SEC_PARAM_BOND;
    sec_param.mitm           = SEC_PARAM_MITM;
    sec_param.lesc           = SEC_PARAM_LESC;
    sec_param.keypress       = SEC_PARAM_KEYPRESS;
    sec_param.io_caps        = SEC_PARAM_IO_CAPABILITIES;
    sec_param.oob            = SEC_PARAM_OOB;
    sec_param.min_key_size   = SEC_PARAM_MIN_KEY_SIZE;
    sec_param.max_key_size   = SEC_PARAM_MAX_KEY_SIZE;
    sec_param.kdist_own.enc  = 1;
    sec_param.kdist_own.id   = 1;
    sec_param.kdist_peer.enc = 1;
    sec_param.kdist_peer.id  = 1;

    err_code = pm_sec_params_set(&sec_param);
    APP_ERROR_CHECK(err_code);

    err_code = pm_register(pm_evt_handler);
    APP_ERROR_CHECK(err_code);
}



static void bsp_event_handler(bsp_event_t event)
{
    ret_code_t err_code;

    switch (event)
    {
        case BSP_EVENT_SLEEP:
            sleep_mode_enter();
            break;

        case BSP_EVENT_DISCONNECT:
            err_code = sd_ble_gap_disconnect(m_ias_c.conn_handle,
                                             BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
            if (err_code != NRF_ERROR_INVALID_STATE)
            {
                APP_ERROR_CHECK(err_code);
            }
            break;

        case BSP_EVENT_KEY_0:
        {
            if (m_is_ias_present)
            {
                if (!m_is_high_alert_signalled)
                {
                    err_code =
                        ble_ias_c_send_alert_level(&m_ias_c, BLE_CHAR_ALERT_LEVEL_HIGH_ALERT);
                }
                else
                {
                    err_code = ble_ias_c_send_alert_level(&m_ias_c, BLE_CHAR_ALERT_LEVEL_NO_ALERT);
                }

                if (err_code == NRF_SUCCESS)
                {
                    m_is_high_alert_signalled = !m_is_high_alert_signalled;
                }
                else if (
                    (err_code != NRF_ERROR_RESOURCES)
                    &&
                    (err_code != BLE_ERROR_GATTS_SYS_ATTR_MISSING)
                    &&
                    (err_code != NRF_ERROR_NOT_FOUND)
                        )
                {
                    APP_ERROR_HANDLER(err_code);
                }
            }
        } break;

        case BSP_EVENT_KEY_1:
            NRF_LOG_INFO("Alert Off.");
            err_code = bsp_indication_set(BSP_INDICATE_ALERT_OFF);
            APP_ERROR_CHECK(err_code);
            break;

        default:
            break;
    }
}



static void buttons_leds_init(bool * p_erase_bonds)
{
    ret_code_t err_code;
    bsp_event_t startup_event;

    err_code = bsp_init(BSP_INIT_LEDS | BSP_INIT_BUTTONS, bsp_event_handler);
    APP_ERROR_CHECK(err_code);

    err_code = bsp_btn_ble_init(NULL, &startup_event);
    APP_ERROR_CHECK(err_code);

    *p_erase_bonds = (startup_event == BSP_EVENT_CLEAR_BONDING_DATA);
}



static void log_init(void)
{
    ret_code_t err_code = NRF_LOG_INIT(NULL);
    APP_ERROR_CHECK(err_code);

    NRF_LOG_DEFAULT_BACKENDS_INIT();
}



static void power_management_init(void)
{
    ret_code_t err_code;
    err_code = nrf_pwr_mgmt_init();
    APP_ERROR_CHECK(err_code);
}



static void idle_state_handle(void)
{
    if (NRF_LOG_PROCESS() == false)
    {
        nrf_pwr_mgmt_run();
    }
}



///**@brief Function for starting advertising.
// */
//static void advertising_start(bool erase_bonds)
//{
//    if (erase_bonds == true){
//        delete_bonds();
//        // Advertising is started by PM_EVT_PEERS_DELETE_SUCEEDED event.
//    }
//    else
//    {
//        uint32_t err_code = ble_advertising_start(&m_advertising, BLE_ADV_MODE_FAST);
//
//        APP_ERROR_CHECK(err_code);
//    }
//}



static void tx_power_set(void)
{
    ret_code_t err_code = sd_ble_gap_tx_power_set(BLE_GAP_TX_POWER_ROLE_ADV, m_advertising.adv_handle, TX_POWER_LEVEL);
    APP_ERROR_CHECK(err_code);
}


int main(void)
{
    bool erase_bonds;

    // Initialize.
    log_init();
    timers_init();
    buttons_leds_init(&erase_bonds);
    power_management_init();
    ble_stack_init();
    adc_configure();
    gap_params_init();
    gatt_init();
    advertising_init();
    db_discovery_init();
    services_init();
    conn_params_init();
    peer_manager_init();

    // Start execution.
    NRF_LOG_INFO("Proximity example started.");
    advertising_start(erase_bonds);
    tx_power_set();

    // Enter main loop.
    for (;;)
    {
        idle_state_handle();
    }
}

thank you

Parents Reply
  • Hi,

    Which SDK version and SoftDevice version are you using (there are many different versions of S132)?

    The error is because you are trying to populate a field called "type" in the ble_gap_adv_params_t instance, which doe snot exist (see how it is defined in ble_gap.h). Assuming you are using a recent SDK, the type field is within the property field, so you should set it like this:

    adv_params.properties.type        = BLE_GAP_ADV_TYPE_ADV_DIRECT_IND; 

Children
  • I see. I assume you have fixed the compiler error from your previous post? What is the current state, and what do you need help with now? Please elaborate.

  • @Einar Thorsrud

    It is not advertising can you add that "advertising with pre shared irk" code to my code given above or please guide me how to do it

  • i had added this code to my peer manger of my code 

    ret_code_t err_code;
    
    const ble_gap_id_key_t m_peer1 = 
    {
        .id_info =
        {
            .irk = {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F},
        }
    };
    
    const ble_gap_id_key_t * m_identities[] = {&m_peer1};
    
    err_code = sd_ble_gap_device_identities_set(m_identities, NULL, 1);
    APP_ERROR_CHECK(err_code);
    
    ble_gap_addr_t gap_addr = 
    {
        .addr_id_peer = 0,
    };
    
    ble_gap_adv_params_t adv_params;
    
    memset(&adv_params, 0, sizeof(adv_params));
    adv_params.properties.type = BLE_GAP_ADV_TYPE_ADV_DIRECT_IND;
    adv_params.p_peer_addr = &gap_addr;
    
    err_code = sd_ble_gap_adv_start(&adv_params);
    APP_ERROR_CHECK(err_code);

    final code

    #include <stdint.h>
    #include <string.h>
    
    #include "ble_advertising.h"
    #include "nordic_common.h"
    #include "nrf.h"
    #include "nrf_soc.h"
    #include "nrf_drv_saadc.h"
    #include "nrf_sdm.h"
    #include "app_error.h"
    #include "ble.h"
    #include "ble_err.h"
    #include "ble_hci.h"
    #include "ble_srv_common.h"
    #include "ble_advdata.h"
    #include "ble_tps.h"
    #include "ble_ias.h"
    #include "ble_lls.h"
    #include "ble_bas.h"
    #include "ble_conn_params.h"
    #include "ble_conn_state.h"
    #include "sensorsim.h"
    #include "nrf_sdh.h"
    #include "nrf_sdh_soc.h"
    #include "nrf_sdh_ble.h"
    #include "app_timer.h"
    #include "app_error.h"
    #include "ble_ias_c.h"
    #include "app_util.h"
    #include "bsp_btn_ble.h"
    #include "ble_db_discovery.h"
    #include "peer_manager.h"
    #include "peer_manager_handler.h"
    #include "fds.h"
    #include "ble_conn_state.h"
    #include "nrf_ble_gatt.h"
    #include "nrf_ble_lesc.h"
    #include "nrf_ble_qwr.h"
    //#include "nrf_ble_scan.h"
    #include "nrf_pwr_mgmt.h"
    #include "nrf_fstorage.h"
    
    #include "nrf_log.h"
    #include "nrf_log_ctrl.h"
    #include "nrf_log_default_backends.h"
    
    
    #define DEVICE_NAME                     "Goolean"                           
    
    #define APP_BLE_OBSERVER_PRIO           3                                       
    #define APP_BLE_CONN_CFG_TAG            1                                       
    
    #define BATTERY_LEVEL_MEAS_INTERVAL     APP_TIMER_TICKS(120000)                 
    
    #define MIN_CONN_INTERVAL               MSEC_TO_UNITS(500, UNIT_1_25_MS)        
    #define MAX_CONN_INTERVAL               MSEC_TO_UNITS(1000, UNIT_1_25_MS)       
    #define SLAVE_LATENCY                   0                                       
    #define CONN_SUP_TIMEOUT                MSEC_TO_UNITS(4000, UNIT_10_MS)         
    
    //#define APP_ADV_INTERVAL                40                                       
    #define NON_CONNECTABLE_ADV_INTERVAL    MSEC_TO_UNITS(100, UNIT_0_625_MS)  
    
    #define APP_ADV_DURATION                18000                                    
    
    #define FIRST_CONN_PARAMS_UPDATE_DELAY  APP_TIMER_TICKS(5000)                   
    #define NEXT_CONN_PARAMS_UPDATE_DELAY   APP_TIMER_TICKS(30000)                  
    #define MAX_CONN_PARAMS_UPDATE_COUNT    3                                       
    
    #define SEC_PARAM_BOND                  1                                       
    #define SEC_PARAM_MITM                  0                                       
    #define SEC_PARAM_LESC                  0                                       
    #define SEC_PARAM_KEYPRESS              0                                       
    #define SEC_PARAM_IO_CAPABILITIES       BLE_GAP_IO_CAPS_NONE                    
    #define SEC_PARAM_OOB                   0                                       
    #define SEC_PARAM_MIN_KEY_SIZE          7                                       
    #define SEC_PARAM_MAX_KEY_SIZE          16
    #define BLE_GAP_ADV_TYPE_ADV_IND          0x00
    #define BLE_GAP_ADV_TYPE_ADV_DIRECT_IND   0x01
    #define BLE_GAP_ADV_TYPE_ADV_SCAN_IND     0x02
    #define BLE_GAP_ADV_TYPE_ADV_NONCONN_IND  0x03 
    #define BLE_GAP_ADDR_TYPE_PUBLIC                        0x00
    #define BLE_GAP_ADDR_TYPE_RANDOM_STATIC                 0x01
    #define BLE_GAP_ADDR_TYPE_RANDOM_PRIVATE_RESOLVABLE     0x02
    #define BLE_GAP_ADDR_TYPE_RANDOM_PRIVATE_NON_RESOLVABLE 0x03                                     
    
    #define INITIAL_LLS_ALERT_LEVEL         BLE_CHAR_ALERT_LEVEL_NO_ALERT           
    #define TX_POWER_LEVEL                  (-8)                                    
    
    #define ADC_REF_VOLTAGE_IN_MILLIVOLTS   600                                     
    #define ADC_PRE_SCALING_COMPENSATION    6                                       
    #define DIODE_FWD_VOLT_DROP_MILLIVOLTS  270                                     
    #define ADC_RES_10BIT                   1024                                    
    
    #define DEAD_BEEF                       0xDEADBEEF                              
    
    #define APP_BEACON_INFO_LENGTH          0x17                               
    #define APP_ADV_DATA_LENGTH             0x15                               
    #define APP_DEVICE_TYPE                 0x02                               
    #define APP_MEASURED_RSSI               0xC5                               
    #define APP_COMPANY_IDENTIFIER          0x004C                             
    #define APP_MAJOR_VALUE                 0x00, 0x02                         
    #define APP_MINOR_VALUE                 0x00, 0x02                         
    #define APP_BEACON_UUID                 0x01, 0x12, 0x23, 0x34, \
                                            0x45, 0x56, 0x67, 0x78, \
                                            0x89, 0x9a, 0xab, 0xbc, \
                                            0xcd, 0xde, 0xef, 0xf0            
    
    #if defined(USE_UICR_FOR_MAJ_MIN_VALUES)
    #define MAJ_VAL_OFFSET_IN_BEACON_INFO   18                                
    #define UICR_ADDRESS                    0x10001080                         
    #endif
    
    
    #define ADC_RESULT_IN_MILLI_VOLTS(ADC_VALUE)\
            ((((ADC_VALUE) * ADC_REF_VOLTAGE_IN_MILLIVOLTS) / ADC_RES_10BIT) * ADC_PRE_SCALING_COMPENSATION)
    
    
    APP_TIMER_DEF(m_battery_timer_id);                      
    BLE_TPS_DEF(m_tps);                                     
    BLE_IAS_DEF(m_ias, NRF_SDH_BLE_TOTAL_LINK_COUNT);       
    BLE_LLS_DEF(m_lls);                                     
    BLE_BAS_DEF(m_bas);                                     
    BLE_IAS_C_DEF(m_ias_c);                                 
    NRF_BLE_GATT_DEF(m_gatt);                               
    NRF_BLE_QWR_DEF(m_qwr);                                 
    BLE_ADVERTISING_DEF(m_advertising);                     
    BLE_DB_DISCOVERY_DEF(m_ble_db_discovery);               
    
    static volatile bool m_is_high_alert_signalled;         
    static volatile bool m_is_ias_present = false;          
    
    static nrf_saadc_value_t adc_buf[2];
    
    static ble_uuid_t m_adv_uuids[] =                       
    {
        {BLE_UUID_IMMEDIATE_ALERT_SERVICE, BLE_UUID_TYPE_BLE},
        {BLE_UUID_BATTERY_SERVICE, BLE_UUID_TYPE_BLE},
        {BLE_UUID_TX_POWER_SERVICE, BLE_UUID_TYPE_BLE},
        {BLE_UUID_LINK_LOSS_SERVICE, BLE_UUID_TYPE_BLE}
    };
    
    static ble_gap_adv_params_t m_adv_params;                                  
    static uint8_t              m_adv_handle = BLE_GAP_ADV_SET_HANDLE_NOT_SET; 
    static uint8_t              m_enc_advdata[BLE_GAP_ADV_SET_DATA_SIZE_MAX];  
    static uint8_t              m_enc_scandata[BLE_GAP_ADV_SET_DATA_SIZE_MAX];  
    
    
    static ble_gap_adv_data_t m_adv_data =
    {
        .adv_data =
        {
            .p_data = m_enc_advdata,
            .len    = BLE_GAP_ADV_SET_DATA_SIZE_MAX
        },
        .scan_rsp_data =
        {
            .p_data = m_enc_scandata,
            .len    = BLE_GAP_ADV_SET_DATA_SIZE_MAX
    
        }
    };
    
    
    
    
    static uint8_t m_beacon_info[APP_BEACON_INFO_LENGTH] =                    
    {
        APP_DEVICE_TYPE,     
                             
        APP_ADV_DATA_LENGTH, 
                             
        APP_BEACON_UUID,     
        APP_MAJOR_VALUE,     
        APP_MINOR_VALUE,     
        APP_MEASURED_RSSI    
                             
    };
    
    
    static void on_ias_evt(ble_ias_t * p_ias, ble_ias_evt_t * p_evt);
    static void on_lls_evt(ble_lls_t * p_lls, ble_lls_evt_t * p_evt);
    static void on_ias_c_evt(ble_ias_c_t * p_lls, ble_ias_c_evt_t * p_evt);
    static void on_bas_evt(ble_bas_t * p_bas, ble_bas_evt_t * p_evt);
    static void advertising_init(void);
    static void advertising_start(bool erase_bonds);
    
    
    
    void assert_nrf_callback(uint16_t line_num, const uint8_t * p_file_name)
    {
        app_error_handler(DEAD_BEEF, line_num, p_file_name);
    }
    
    
    
    static void service_error_handler(uint32_t nrf_error)
    {
        APP_ERROR_HANDLER(nrf_error);
    }
    
    
    
    static void pm_evt_handler(pm_evt_t const * p_evt)
    {
        pm_handler_on_pm_evt(p_evt);
        pm_handler_flash_clean(p_evt);
    
        switch (p_evt->evt_id)
        {
            case PM_EVT_PEERS_DELETE_SUCCEEDED:
                advertising_start(false);
                break;
    
            default:
                break;
        }
    }
    
    
    
    void saadc_event_handler(nrf_drv_saadc_evt_t const * p_event)
    {
        if (p_event->type == NRF_DRV_SAADC_EVT_DONE)
        {
            nrf_saadc_value_t adc_result;
            uint16_t          batt_lvl_in_milli_volts;
            uint8_t           percentage_batt_lvl;
            uint32_t          err_code;
    
            adc_result = p_event->data.done.p_buffer[0];
    
            err_code = nrf_drv_saadc_buffer_convert(p_event->data.done.p_buffer, 1);
            APP_ERROR_CHECK(err_code);
    
            batt_lvl_in_milli_volts = ADC_RESULT_IN_MILLI_VOLTS(adc_result) +
                                      DIODE_FWD_VOLT_DROP_MILLIVOLTS;
            percentage_batt_lvl = battery_level_in_percent(batt_lvl_in_milli_volts);
    
            err_code = ble_bas_battery_level_update(&m_bas, percentage_batt_lvl, BLE_CONN_HANDLE_ALL);
            if ((err_code != NRF_SUCCESS) &&
                (err_code != NRF_ERROR_INVALID_STATE) &&
                (err_code != NRF_ERROR_RESOURCES) &&
                (err_code != NRF_ERROR_BUSY) &&
                (err_code != BLE_ERROR_GATTS_SYS_ATTR_MISSING)
               )
            {
                APP_ERROR_HANDLER(err_code);
            }
        }
    }
    
    
    
    static void db_disc_handler(ble_db_discovery_evt_t * p_evt)
    {
        ble_ias_c_on_db_disc_evt(&m_ias_c, p_evt);
    }
    
    
    
    static void adc_configure(void)
    {
        ret_code_t err_code = nrf_drv_saadc_init(NULL, saadc_event_handler);
        APP_ERROR_CHECK(err_code);
    
        nrf_saadc_channel_config_t config =
            NRF_DRV_SAADC_DEFAULT_CHANNEL_CONFIG_SE(NRF_SAADC_INPUT_VDD);
        err_code = nrf_drv_saadc_channel_init(0, &config);
        APP_ERROR_CHECK(err_code);
    
        err_code = nrf_drv_saadc_buffer_convert(&adc_buf[0], 1);
        APP_ERROR_CHECK(err_code);
    
        err_code = nrf_drv_saadc_buffer_convert(&adc_buf[1], 1);
        APP_ERROR_CHECK(err_code);
    }
    
    
    
    static void battery_level_meas_timeout_handler(void * p_context)
    {
        UNUSED_PARAMETER(p_context);
    
        ret_code_t err_code;
        err_code = nrf_drv_saadc_sample();
        APP_ERROR_CHECK(err_code);
    }
    
    
    
    static void timers_init(void)
    {
        ret_code_t err_code;
    
        
        err_code = app_timer_init();
        APP_ERROR_CHECK(err_code);
    
        
        err_code = app_timer_create(&m_battery_timer_id,
                                    APP_TIMER_MODE_REPEATED,
                                    battery_level_meas_timeout_handler);
        APP_ERROR_CHECK(err_code);
    }
    
    
    
    static void gap_params_init(void)
    {
        ret_code_t              err_code;
        ble_gap_conn_params_t   gap_conn_params;
        ble_gap_conn_sec_mode_t sec_mode;
    
        BLE_GAP_CONN_SEC_MODE_SET_OPEN(&sec_mode);
    
        err_code = sd_ble_gap_device_name_set(&sec_mode,
                                              (const uint8_t *)DEVICE_NAME,
                                              strlen(DEVICE_NAME));
        APP_ERROR_CHECK(err_code);
    
        err_code = sd_ble_gap_appearance_set(BLE_APPEARANCE_GENERIC_KEYRING);
        APP_ERROR_CHECK(err_code);
    
        memset(&gap_conn_params, 0, sizeof(gap_conn_params));
    
        gap_conn_params.min_conn_interval = MIN_CONN_INTERVAL;
        gap_conn_params.max_conn_interval = MAX_CONN_INTERVAL;
        gap_conn_params.slave_latency     = SLAVE_LATENCY;
        gap_conn_params.conn_sup_timeout  = CONN_SUP_TIMEOUT;
    
        err_code = sd_ble_gap_ppcp_set(&gap_conn_params);
        APP_ERROR_CHECK(err_code);
    }
    
    
    
    static void gatt_init(void)
    {
        ret_code_t err_code = nrf_ble_gatt_init(&m_gatt, NULL);
        APP_ERROR_CHECK(err_code);
    }
    
    
    
    static void sleep_mode_enter(void)
    {
        ret_code_t err_code;
    
        err_code = bsp_indication_set(BSP_INDICATE_IDLE);
        APP_ERROR_CHECK(err_code);
    
        
        err_code = bsp_btn_ble_sleep_mode_prepare();
        APP_ERROR_CHECK(err_code);
    
        
        err_code = sd_power_system_off();
        APP_ERROR_CHECK(err_code);
    }
    
    
    
    static void on_adv_evt(ble_adv_evt_t ble_adv_evt)
    {
        ret_code_t err_code;
    
        switch (ble_adv_evt)
        {
            case BLE_ADV_EVT_FAST:
                NRF_LOG_INFO("Fast advertising.");
                err_code = bsp_indication_set(BSP_INDICATE_ADVERTISING);
                APP_ERROR_CHECK(err_code);
                break; // BLE_ADV_EVT_FAST
    
            case BLE_ADV_EVT_IDLE:
                sleep_mode_enter();
                break; // BLE_ADV_EVT_IDLE
    
            default:
                break;
        }
    }
    
    
    
    static void delete_bonds(void)
    {
        ret_code_t err_code;
    
        NRF_LOG_INFO("Erase bonds!");
    
        err_code = pm_peers_delete();
        APP_ERROR_CHECK(err_code);
    }
    
    
    static void advertising_init(void)
    {
        uint32_t      err_code;
        ble_advdata_t advdata;
        ble_advdata_t scandata;
        uint8_t       flags = BLE_GAP_ADV_FLAG_BR_EDR_NOT_SUPPORTED;
    
        ble_advdata_manuf_data_t manuf_specific_data;
    
        manuf_specific_data.company_identifier = APP_COMPANY_IDENTIFIER;
    
    #if defined(USE_UICR_FOR_MAJ_MIN_VALUES)
    
        uint16_t major_value = ((*(uint32_t *)UICR_ADDRESS) & 0xFFFF0000) >> 16;
        uint16_t minor_value = ((*(uint32_t *)UICR_ADDRESS) & 0x0000FFFF);
    
        uint8_t index = MAJ_VAL_OFFSET_IN_BEACON_INFO;
    
        m_beacon_info[index++] = MSB_16(major_value);
        m_beacon_info[index++] = LSB_16(major_value);
    
        m_beacon_info[index++] = MSB_16(minor_value);
        m_beacon_info[index++] = LSB_16(minor_value);
    #endif
    
        manuf_specific_data.data.p_data = (uint8_t *) m_beacon_info;
        manuf_specific_data.data.size   = APP_BEACON_INFO_LENGTH;
    
    
        memset(&advdata, 0, sizeof(advdata));
    
        advdata.name_type             = BLE_ADVDATA_NO_NAME;
        advdata.flags                 = flags;
        advdata.p_manuf_specific_data = &manuf_specific_data;
    
    
        memset(&m_adv_params, 0, sizeof(m_adv_params));
    
        m_adv_params.properties.type = BLE_GAP_ADV_TYPE_CONNECTABLE_SCANNABLE_UNDIRECTED;
        m_adv_params.p_peer_addr     = NULL;    
        m_adv_params.filter_policy   = BLE_GAP_ADV_FP_ANY;
        m_adv_params.interval        = NON_CONNECTABLE_ADV_INTERVAL;
        m_adv_params.duration        = 0;       
    
        err_code = ble_advdata_encode(&advdata, m_adv_data.adv_data.p_data, &m_adv_data.adv_data.len);
        APP_ERROR_CHECK(err_code);
    
    
        memset(&scandata, 0, sizeof(scandata));
    
        scandata.name_type             = BLE_ADVDATA_FULL_NAME;
        scandata.uuids_complete.uuid_cnt = sizeof(m_adv_uuids) / sizeof(m_adv_uuids[0]);
        scandata.uuids_complete.p_uuids  = m_adv_uuids;
    
        ble_gap_addr_t gap_address;
        gap_address.addr_type = BLE_GAP_ADDR_TYPE_PUBLIC;
        memcpy(&gap_address.addr, "\xbb\xaa\xcc\xbb\xaa\xAC", sizeof(gap_address.addr));
        err_code = sd_ble_gap_addr_set(&gap_address);
        APP_ERROR_CHECK(err_code);
    
        err_code = ble_advdata_encode(&scandata, m_adv_data.scan_rsp_data.p_data, &m_adv_data.scan_rsp_data.len);
        APP_ERROR_CHECK(err_code);
    
        err_code = sd_ble_gap_adv_set_configure(&m_adv_handle, &m_adv_data, &m_adv_params);
        APP_ERROR_CHECK(err_code);
    }
    
    
    
    static void advertising_start(bool erase_bonds)
    {
        ret_code_t err_code;
        if (erase_bonds == true){
            delete_bonds();
            
        }
        else
        {
            err_code = sd_ble_gap_adv_start(m_adv_handle, APP_BLE_CONN_CFG_TAG);
            APP_ERROR_CHECK(err_code);
    
            err_code = bsp_indication_set(BSP_INDICATE_ADVERTISING);
            APP_ERROR_CHECK(err_code);
        }
        
       
    }
    
    ///**@brief Function for initializing the Advertising functionality.
    // *
    // * @details Encodes the required advertising data and passes it to the stack.
    // *          Also builds a structure to be passed to the stack when starting advertising.
    // */
    //static void advertising_init(void)
    //{
    //    ret_code_t             err_code;
    //    ble_advertising_init_t init;
    //
    //    memset(&init, 0, sizeof(init));
    //
    //    init.advdata.name_type               = BLE_ADVDATA_FULL_NAME;
    //    init.advdata.include_appearance      = true;
    //    init.advdata.flags                   = BLE_GAP_ADV_FLAGS_LE_ONLY_LIMITED_DISC_MODE;
    //    init.advdata.uuids_complete.uuid_cnt = sizeof(m_adv_uuids) / sizeof(m_adv_uuids[0]);
    //    init.advdata.uuids_complete.p_uuids  = m_adv_uuids;
    //
    //    init.config.ble_adv_fast_enabled  = true;
    //    init.config.ble_adv_fast_interval = APP_ADV_INTERVAL;
    //    init.config.ble_adv_fast_timeout  = APP_ADV_DURATION;
    //
    //    init.evt_handler = on_adv_evt;
    //
    //    err_code = ble_advertising_init(&m_advertising, &init);
    //    APP_ERROR_CHECK(err_code);
    //
    //    ble_advertising_conn_cfg_tag_set(&m_advertising, APP_BLE_CONN_CFG_TAG);
    //}
    
    
    
    static void nrf_qwr_error_handler(uint32_t nrf_error)
    {
        APP_ERROR_HANDLER(nrf_error);
    }
    
    
    
    static void qwr_init(void)
    {
        ret_code_t         err_code;
        nrf_ble_qwr_init_t qwr_init_obj = {0};
    
     
        qwr_init_obj.error_handler = nrf_qwr_error_handler;
    
        err_code = nrf_ble_qwr_init(&m_qwr, &qwr_init_obj);
        APP_ERROR_CHECK(err_code);
    }
    
    
    
    static void tps_init(void)
    {
        ret_code_t     err_code;
        ble_tps_init_t tps_init_obj;
    
        memset(&tps_init_obj, 0, sizeof(tps_init_obj));
        tps_init_obj.initial_tx_power_level = TX_POWER_LEVEL;
    
        tps_init_obj.tpl_rd_sec = SEC_JUST_WORKS;
    
        err_code = ble_tps_init(&m_tps, &tps_init_obj);
        APP_ERROR_CHECK(err_code);
    }
    
    
    
    static void ias_init(void)
    {
        ret_code_t     err_code;
        ble_ias_init_t ias_init_obj;
    
        memset(&ias_init_obj, 0, sizeof(ias_init_obj));
        ias_init_obj.evt_handler  = on_ias_evt;
    
        ias_init_obj.alert_wr_sec = SEC_JUST_WORKS;
    
        err_code = ble_ias_init(&m_ias, &ias_init_obj);
        APP_ERROR_CHECK(err_code);
    }
    
    
    
    static void lls_init(void)
    {
        ret_code_t     err_code;
        ble_lls_init_t lls_init_obj;
    
        // Initialize Link Loss Service
        memset(&lls_init_obj, 0, sizeof(lls_init_obj));
    
        lls_init_obj.evt_handler         = on_lls_evt;
        lls_init_obj.error_handler       = service_error_handler;
        lls_init_obj.initial_alert_level = INITIAL_LLS_ALERT_LEVEL;
    
        lls_init_obj.alert_level_rd_sec = SEC_JUST_WORKS;
        lls_init_obj.alert_level_wr_sec = SEC_JUST_WORKS;
    
        err_code = ble_lls_init(&m_lls, &lls_init_obj);
        APP_ERROR_CHECK(err_code);
    }
    
    
    
    static void bas_init(void)
    {
        ret_code_t     err_code;
        ble_bas_init_t bas_init_obj;
    
        memset(&bas_init_obj, 0, sizeof(bas_init_obj));
    
        bas_init_obj.evt_handler          = on_bas_evt;
        bas_init_obj.support_notification = true;
        bas_init_obj.p_report_ref         = NULL;
        bas_init_obj.initial_batt_level   = 100;
    
        bas_init_obj.bl_rd_sec        = SEC_OPEN;
        bas_init_obj.bl_cccd_wr_sec   = SEC_OPEN;
        bas_init_obj.bl_report_rd_sec = SEC_OPEN;
    
        err_code = ble_bas_init(&m_bas, &bas_init_obj);
        APP_ERROR_CHECK(err_code);
    }
    
    
    
    static void ias_client_init(void)
    {
        ret_code_t       err_code;
        ble_ias_c_init_t ias_c_init_obj;
    
        memset(&ias_c_init_obj, 0, sizeof(ias_c_init_obj));
    
        m_is_high_alert_signalled = false;
    
        ias_c_init_obj.evt_handler   = on_ias_c_evt;
        ias_c_init_obj.error_handler = service_error_handler;
    
        err_code = ble_ias_c_init(&m_ias_c, &ias_c_init_obj);
        APP_ERROR_CHECK(err_code);
    }
    
    
    
    static void services_init(void)
    {
        qwr_init();
        tps_init();
        ias_init();
        lls_init();
        bas_init();
        ias_client_init();
    }
    
    
    
    static void db_discovery_init(void)
    {
        ret_code_t err_code = ble_db_discovery_init(db_disc_handler);
        APP_ERROR_CHECK(err_code);
    }
    
    
    static void conn_params_error_handler(uint32_t nrf_error)
    {
        APP_ERROR_HANDLER(nrf_error);
    }
    
    
    
    static void conn_params_init(void)
    {
        ret_code_t             err_code;
        ble_conn_params_init_t cp_init;
    
        memset(&cp_init, 0, sizeof(cp_init));
    
        cp_init.p_conn_params                  = NULL;
        cp_init.first_conn_params_update_delay = FIRST_CONN_PARAMS_UPDATE_DELAY;
        cp_init.next_conn_params_update_delay  = NEXT_CONN_PARAMS_UPDATE_DELAY;
        cp_init.max_conn_params_update_count   = MAX_CONN_PARAMS_UPDATE_COUNT;
        cp_init.start_on_notify_cccd_handle    = BLE_GATT_HANDLE_INVALID;
        cp_init.disconnect_on_fail             = true;
        cp_init.evt_handler                    = NULL;
        cp_init.error_handler                  = conn_params_error_handler;
    
        err_code = ble_conn_params_init(&cp_init);
        APP_ERROR_CHECK(err_code);
    }
    
    
    
    static void alert_signal(uint8_t alert_level)
    {
        ret_code_t err_code;
    
        switch (alert_level)
        {
            case BLE_CHAR_ALERT_LEVEL_NO_ALERT:
                NRF_LOG_INFO("No Alert.");
                err_code = bsp_indication_set(BSP_INDICATE_ALERT_OFF);
                APP_ERROR_CHECK(err_code);
                break; // BLE_CHAR_ALERT_LEVEL_NO_ALERT
    
            case BLE_CHAR_ALERT_LEVEL_MILD_ALERT:
                NRF_LOG_INFO("Mild Alert.");
                err_code = bsp_indication_set(BSP_INDICATE_ALERT_0);
                APP_ERROR_CHECK(err_code);
                break; // BLE_CHAR_ALERT_LEVEL_MILD_ALERT
    
            case BLE_CHAR_ALERT_LEVEL_HIGH_ALERT:
                NRF_LOG_INFO("HIGH Alert.");
                err_code = bsp_indication_set(BSP_INDICATE_ALERT_3);
                APP_ERROR_CHECK(err_code);
                break; // BLE_CHAR_ALERT_LEVEL_HIGH_ALERT
    
            default:
    
                break;
        }
    }
    
    
    
    static void on_ias_evt(ble_ias_t * p_ias, ble_ias_evt_t * p_evt)
    {
        switch (p_evt->evt_type)
        {
            case BLE_IAS_EVT_ALERT_LEVEL_UPDATED:
                if (p_evt->p_link_ctx != NULL)
                {
                    alert_signal(p_evt->p_link_ctx->alert_level);
                }
                break; // BLE_IAS_EVT_ALERT_LEVEL_UPDATED
    
            default:
                // No implementation needed.
                break;
        }
    }
    
    
    
    static void on_lls_evt(ble_lls_t * p_lls, ble_lls_evt_t * p_evt)
    {
        switch (p_evt->evt_type)
        {
            case BLE_LLS_EVT_LINK_LOSS_ALERT:
                alert_signal(p_evt->params.alert_level);
                break; // BLE_LLS_EVT_LINK_LOSS_ALERT
    
            default:
                // No implementation needed.
                break;
        }
    }
    
    
    
    
    static void on_ias_c_evt(ble_ias_c_t * p_ias_c, ble_ias_c_evt_t * p_evt)
    {
        ret_code_t err_code;
    
        switch (p_evt->evt_type)
        {
            case BLE_IAS_C_EVT_DISCOVERY_COMPLETE:
                // IAS is found on peer. The Find Me Locator functionality of this app will work.
                err_code = ble_ias_c_handles_assign(&m_ias_c,
                                                    p_evt->conn_handle,
                                                    p_evt->alert_level.handle_value);
                APP_ERROR_CHECK(err_code);
    
                m_is_ias_present = true;
                break; // BLE_IAS_C_EVT_DISCOVERY_COMPLETE
    
            case BLE_IAS_C_EVT_DISCOVERY_FAILED:
                // IAS is not found on peer. The Find Me Locator functionality of this app will NOT work.
                break; // BLE_IAS_C_EVT_DISCOVERY_FAILED
    
            case BLE_IAS_C_EVT_DISCONN_COMPLETE:
                // Disable alert buttons
                m_is_ias_present = false;
                break; // BLE_IAS_C_EVT_DISCONN_COMPLETE
    
            default:
                break;
        }
    }
    
    
    
    static void on_bas_evt(ble_bas_t * p_bas, ble_bas_evt_t * p_evt)
    {
        ret_code_t err_code;
    
        switch (p_evt->evt_type)
        {
            case BLE_BAS_EVT_NOTIFICATION_ENABLED:
                // Start battery timer
                err_code = app_timer_start(m_battery_timer_id, BATTERY_LEVEL_MEAS_INTERVAL, NULL);
                APP_ERROR_CHECK(err_code);
                break; // BLE_BAS_EVT_NOTIFICATION_ENABLED
    
            case BLE_BAS_EVT_NOTIFICATION_DISABLED:
                err_code = app_timer_stop(m_battery_timer_id);
                APP_ERROR_CHECK(err_code);
                break; // BLE_BAS_EVT_NOTIFICATION_DISABLED
    
            default:
                // No implementation needed.
                break;
        }
    }
    
    
    
    static void ble_evt_handler(ble_evt_t const * p_ble_evt, void * p_context)
    {
        ret_code_t err_code = NRF_SUCCESS;
    
        switch (p_ble_evt->header.evt_id)
        {
            case BLE_GAP_EVT_DISCONNECTED:
                NRF_LOG_INFO("Disconnected.");
                // LED indication will be changed when advertising starts.
                break;
    
            case BLE_GAP_EVT_CONNECTED:
            {
                NRF_LOG_INFO("Connected.");
                err_code = bsp_indication_set(BSP_INDICATE_CONNECTED);
                APP_ERROR_CHECK(err_code);
    
                // Assign connection handle to the Queued Write module.
                err_code = nrf_ble_qwr_conn_handle_assign(&m_qwr, p_ble_evt->evt.gap_evt.conn_handle);
                APP_ERROR_CHECK(err_code);
    
                // Discover peer's services.
                err_code = ble_db_discovery_start(&m_ble_db_discovery,
                                                  p_ble_evt->evt.gap_evt.conn_handle);
                APP_ERROR_CHECK(err_code);
            } break;
    
            case BLE_GAP_EVT_PHY_UPDATE_REQUEST:
            {
                NRF_LOG_DEBUG("PHY update request.");
                ble_gap_phys_t const phys =
                {
                    .rx_phys = BLE_GAP_PHY_AUTO,
                    .tx_phys = BLE_GAP_PHY_AUTO,
                };
                err_code = sd_ble_gap_phy_update(p_ble_evt->evt.gap_evt.conn_handle, &phys);
                APP_ERROR_CHECK(err_code);
            } break;
    
            case BLE_GATTC_EVT_TIMEOUT:
                // Disconnect on GATT Client timeout event.
                NRF_LOG_DEBUG("GATT Client Timeout.");
                err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gattc_evt.conn_handle,
                                                 BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
                APP_ERROR_CHECK(err_code);
                break;
    
            case BLE_GATTS_EVT_TIMEOUT:
                // Disconnect on GATT Server timeout event.
                NRF_LOG_DEBUG("GATT Server Timeout.");
                err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gatts_evt.conn_handle,
                                                 BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
                APP_ERROR_CHECK(err_code);
                break;
    
            default:
                // No implementation needed.
                break;
        }
    }
    
    
    
    static void ble_stack_init(void)
    {
        ret_code_t err_code;
    
        err_code = nrf_sdh_enable_request();
        APP_ERROR_CHECK(err_code);
    
        // Configure the BLE stack using the default settings.
        // Fetch the start address of the application RAM.
        uint32_t ram_start = 0;
        err_code = nrf_sdh_ble_default_cfg_set(APP_BLE_CONN_CFG_TAG, &ram_start);
        APP_ERROR_CHECK(err_code);
    
        // Enable BLE stack.
        err_code = nrf_sdh_ble_enable(&ram_start);
        APP_ERROR_CHECK(err_code);
    
        // Register a handler for BLE events.
        NRF_SDH_BLE_OBSERVER(m_ble_observer, APP_BLE_OBSERVER_PRIO, ble_evt_handler, NULL);
    }
    
    
    static void peer_manager_init(void)
    {
    ret_code_t err_code;
    
    const ble_gap_id_key_t m_peer1 = 
    {
        .id_info =
        {
            .irk = {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F},
        }
    };
    
    const ble_gap_id_key_t * m_identities[] = {&m_peer1};
    
    err_code = sd_ble_gap_device_identities_set(m_identities, NULL, 1);
    APP_ERROR_CHECK(err_code);
    
    ble_gap_addr_t gap_addr = 
    {
        .addr_id_peer = 0,
    };
    
    ble_gap_adv_params_t adv_params;
    
    memset(&adv_params, 0, sizeof(adv_params));
    adv_params.properties.type = BLE_GAP_ADV_TYPE_ADV_DIRECT_IND;
    adv_params.p_peer_addr = &gap_addr;
    
    err_code = sd_ble_gap_adv_start(&adv_params);
    APP_ERROR_CHECK(err_code);
    }
    
    
    
    static void bsp_event_handler(bsp_event_t event)
    {
        ret_code_t err_code;
    
        switch (event)
        {
            case BSP_EVENT_SLEEP:
                sleep_mode_enter();
                break;
    
            case BSP_EVENT_DISCONNECT:
                err_code = sd_ble_gap_disconnect(m_ias_c.conn_handle,
                                                 BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
                if (err_code != NRF_ERROR_INVALID_STATE)
                {
                    APP_ERROR_CHECK(err_code);
                }
                break;
    
            case BSP_EVENT_KEY_0:
            {
                if (m_is_ias_present)
                {
                    if (!m_is_high_alert_signalled)
                    {
                        err_code =
                            ble_ias_c_send_alert_level(&m_ias_c, BLE_CHAR_ALERT_LEVEL_HIGH_ALERT);
                    }
                    else
                    {
                        err_code = ble_ias_c_send_alert_level(&m_ias_c, BLE_CHAR_ALERT_LEVEL_NO_ALERT);
                    }
    
                    if (err_code == NRF_SUCCESS)
                    {
                        m_is_high_alert_signalled = !m_is_high_alert_signalled;
                    }
                    else if (
                        (err_code != NRF_ERROR_RESOURCES)
                        &&
                        (err_code != BLE_ERROR_GATTS_SYS_ATTR_MISSING)
                        &&
                        (err_code != NRF_ERROR_NOT_FOUND)
                            )
                    {
                        APP_ERROR_HANDLER(err_code);
                    }
                }
            } break;
    
            case BSP_EVENT_KEY_1:
                NRF_LOG_INFO("Alert Off.");
                err_code = bsp_indication_set(BSP_INDICATE_ALERT_OFF);
                APP_ERROR_CHECK(err_code);
                break;
    
            default:
                break;
        }
    }
    
    
    
    static void buttons_leds_init(bool * p_erase_bonds)
    {
        ret_code_t err_code;
        bsp_event_t startup_event;
    
        err_code = bsp_init(BSP_INIT_LEDS | BSP_INIT_BUTTONS, bsp_event_handler);
        APP_ERROR_CHECK(err_code);
    
        err_code = bsp_btn_ble_init(NULL, &startup_event);
        APP_ERROR_CHECK(err_code);
    
        *p_erase_bonds = (startup_event == BSP_EVENT_CLEAR_BONDING_DATA);
    }
    
    
    
    static void log_init(void)
    {
        ret_code_t err_code = NRF_LOG_INIT(NULL);
        APP_ERROR_CHECK(err_code);
    
        NRF_LOG_DEFAULT_BACKENDS_INIT();
    }
    
    
    
    static void power_management_init(void)
    {
        ret_code_t err_code;
        err_code = nrf_pwr_mgmt_init();
        APP_ERROR_CHECK(err_code);
    }
    
    
    
    static void idle_state_handle(void)
    {
        if (NRF_LOG_PROCESS() == false)
        {
            nrf_pwr_mgmt_run();
        }
    }
    
    
    
    ///**@brief Function for starting advertising.
    // */
    //static void advertising_start(bool erase_bonds)
    //{
    //    if (erase_bonds == true){
    //        delete_bonds();
    //        // Advertising is started by PM_EVT_PEERS_DELETE_SUCEEDED event.
    //    }
    //    else
    //    {
    //        uint32_t err_code = ble_advertising_start(&m_advertising, BLE_ADV_MODE_FAST);
    //
    //        APP_ERROR_CHECK(err_code);
    //    }
    //}
    
    
    
    static void tx_power_set(void)
    {
        ret_code_t err_code = sd_ble_gap_tx_power_set(BLE_GAP_TX_POWER_ROLE_ADV, m_advertising.adv_handle, TX_POWER_LEVEL);
        APP_ERROR_CHECK(err_code);
    }
    
    
    int main(void)
    {
        bool erase_bonds;
    
        // Initialize.
        log_init();
        timers_init();
        buttons_leds_init(&erase_bonds);
        power_management_init();
        ble_stack_init();
        adc_configure();
        gap_params_init();
        gatt_init();
        advertising_init();
        db_discovery_init();
        services_init();
        conn_params_init();
        peer_manager_init();
    
        // Start execution.
        NRF_LOG_INFO("Proximity example started.");
        advertising_start(erase_bonds);
        tx_power_set();
    
        // Enter main loop.
        for (;;)
        {
            idle_state_handle();
        }
    }

    but i am getting errors

Related