Relay not working for Github project nrf52-mesh-light-switch-client-server-proxy

[Hit]

Hi

    I am working on Mesh using light switch example,

1. Wants to relay the ON/OFF message to other server.

2. And send mesh message from server to all node in mesh network.

I used  GitHub example: https://github.com/NordicPlayground/nrf52-mesh-light-switch-client-server-proxy

Case 2. working properly.

The problem is with Case 1, relay of message does not works.

[Mttrinh]

Hi,

The relay feature should be on. How do you do the testing? Can you give me more details about your setup?

[Hit]

Hi, 

 I have 3 nRF52840.

Initially I put all 3 DK near and tested for each node to send mesh message to all node in mesh network, it worked perfectly

Then to test relay of message, I changed default TX power  to NEG20dBM in scanner.c and advertiser.c , as it can be easy to test relay feature in less area.

I put the 3rd DK out of range of 1st DK, with 2nd DK turn OFF. Then put the 2nd DK in between the 1st and 3rd DK

but relay feature did not worked. The message signal was transmitted till 2nd DK.

I checked for the code,but relay feature was on in it.

[dmore]

Hi, have you found the solution yet? I'm facing the same issue.

Also: when i'm debugging I always get the LOG: Proxy enabled. Is this working against the relay feature?

Thanks,

Dmore

[Mttrinh]

Hi,

This thread is a bit old, could you create a new ticket and we will handle it there.

Best Regards,

Martin