• State Verified Answer
  • Replies 4 replies
  • Subscribers 87 subscribers
  • Views 1695 views
  • Users 0 members are here
Attachments (1) Download All
Nordic Case Info
  • Case ID: 227410
Options
This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts

nRF9160 DK Asset Tracker nrf_cloud_connect failed: -111

ERIK

I recently got past an issue with not connecting to the LTE network getting an nrf_cloud_connect failed: 60 and had things working yesterday.  I had support for that issue in case 222766 (https://devzone.nordicsemi.com/support/222766), helped by @Øyvind. 

I went back to try things today and am getting a different error:

nrf_cloud_connect failed: -111

From looking at DevZone it appears that this error is for Connection Refused and can happen when all of the 10MB of data gets used up for the provided iBasis SIM.  I did inadvertently leave the board running for a few hours yesterday, so this might be possible, though I'm not certain of the position of SW2 at the time, which determines if messages are sent or not.

The FAQ for iBasis on DevZone (https://devzone.nordicsemi.com/b/nrf9160-development-status/posts/ibasis-global-access-for-things-frequently-asked-questions-faq) says:

1. Q: How can I determine how much data is left in my current data plan?

    A: Your nRF Cloud LTE device dashboard will show the status of your nRF9160 Development Board along with the percent of data remaining in your current plan.

2. Q: How can I purchase more cellular data from the iBasis Global Access for Things worldwide cellular IoT service?

    A: A “Buy More Data” button will appear at the top of your nRF Cloud LTE device dashboard when your current data plan is almost depleted.  When you select the “Buy More Data” button, a data “Top-Up” page will be launched allowing you to select and pre-pay for a Top-Up data plan with your credit card.

But on nRF Cloud I don't get anything showing the percent of remaining data in my plan, nor do I get a Buy More Data button at the top of the device dashboard.

So, I can't tell if I've used up my data or not.  How do I figure out what's wrong?

Here is the output from the nRF Cloud terminal.

AT+CFUN?
nrf_cloud_connect failed: -111
***** Booting Zephyr OS v1.13.99-ncs1-5025-g745326266d9c *****
Secure Boot: configure flash
Secure Boot: SPU: set region 0 as Secure
Secure Boot: SPU: set region 1 as Secure
Secure Boot: SPU: set region 2 as Secure
Secure Boot: SPU: set region 3 as Secure
Secure Boot: SPU: set region 4 as Secure
Secure Boot: SPU: set region 5 as Secure
Secure Boot: SPU: set region 6 as Secure
Secure Boot: SPU: set region 7 as Secure
Secure Boot: SPU: set Flash region 8 as Non-Secure
Secure Boot: SPU: set Flash region 9 as Non-Secure
Secure Boot: SPU: set Flash region 10 as Non-Secure
Secure Boot: SPU: set Flash region 11 as Non-Secure
Secure Boot: SPU: set Flash region 12 as Non-Secure
Secure Boot: SPU: set Flash region 13 as Non-Secure
Secure Boot: SPU: set Flash region 14 as Non-Secure
Secure Boot: SPU: set Flash region 15 as Non-Secure
Secure Boot: SPU: set Flash region 16 as Non-Secure
Secure Boot: SPU: set Flash region 17 as Non-Secure
Secure Boot: SPU: set Flash region 18 as Non-Secure
Secure Boot: SPU: set Flash region 19 as Non-Secure
Secure Boot: SPU: set Flash region 20 as Non-Secure
Secure Boot: SPU: set Flash region 21 as Non-Secure
Secure Boot: SPU: set Flash region 22 as Non-Secure
Secure Boot: SPU: set Flash region 23 as Non-Secure
Secure Boot: SPU: set Flash region 24 as Non-Secure
Secure Boot: SPU: set Flash region 25 as Non-Secure
Secure Boot: SPU: set Flash region 26 as Non-Secure
Secure Boot: SPU: set Flash region 27 as Non-Secure
Secure Boot: SPU: set Flash region 28 as Non-Secure
Secure Boot: SPU: set Flash region 29 as Non-Secure
Secure Boot: SPU: set Flash region 30 as Non-Secure
Secure Boot: SPU: set Flash region 31 as Non-Secure
Secure Boot: configure SRAM
Secure Boot: SPU: set SRAM region 0 as Secure
Secure Boot: SPU: set SRAM region 1 as Secure
Secure Boot: SPU: set SRAM region 2 as Secure
Secure Boot: SPU: set SRAM region 3 as Secure
Secure Boot: SPU: set SRAM region 4 as Secure
Secure Boot: SPU: set SRAM region 5 as Secure
Secure Boot: SPU: set SRAM region 6 as Secure
Secure Boot: SPU: set SRAM region 7 as Secure
Secure Boot: SPU: set SRAM region 8 as Non-Secure
Secure Boot: SPU: set SRAM region 9 as Non-Secure
Secure Boot: SPU: set SRAM region 10 as Non-Secure
Secure Boot: SPU: set SRAM region 11 as Non-Secure
Secure Boot: SPU: set SRAM region 12 as Non-Secure
Secure Boot: SPU: set SRAM region 13 as Non-Secure
Secure Boot: SPU: set SRAM region 14 as Non-Secure
Secure Boot: SPU: set SRAM region 15 as Non-Secure
Secure Boot: SPU: set SRAM region 16 as Non-Secure
Secure Boot: SPU: set SRAM region 17 as Non-Secure
Secure Boot: SPU: set SRAM region 18 as Non-Secure
Secure Boot: SPU: set SRAM region 19 as Non-Secure
Secure Boot: SPU: set SRAM region 20 as Non-Secure
Secure Boot: SPU: set SRAM region 21 as Non-Secure
Secure Boot: SPU: set SRAM region 22 as Non-Secure
Secure Boot: SPU: set SRAM region 23 as Non-Secure
Secure Boot: SPU: set SRAM region 24 as Non-Secure
Secure Boot: SPU: set SRAM region 25 as Non-Secure
Secure Boot: SPU: set SRAM region 26 as Non-Secure
Secure Boot: SPU: set SRAM region 27 as Non-Secure
Secure Boot: SPU: set SRAM region 28 as Non-Secure
Secure Boot: SPU: set SRAM region 29 as Non-Secure
Secure Boot: SPU: set SRAM region 30 as Non-Secure
Secure Boot: SPU: set SRAM region 31 as Non-Secure
Secure Boot: configure peripherals
Secure Boot: MSP_NS 2002b1a0
Secure Boot: prepare to jump to Non-Secure image
***** Booting Zephyr OS v1.13.99-ncs1-5025-g745326266d9c *****
Application started
LTE LC config ...
nrf_cloud_connect failed: -111
***** Booting Zephyr OS v1.13.99-ncs1-5025-g745326266d9c *****
Secure Boot: configure flash
Secure Boot: SPU: set region 0 as Secure
Secure Boot: SPU: set region 1 as Secure
Secure Boot: SPU: set region 2 as Secure
Secure Boot: SPU: set region 3 as Secure
Secure Boot: SPU: set region 4 as Secure
Secure Boot: SPU: set region 5 as Secure
Secure Boot: SPU: set region 6 as Secure
Secure Boot: SPU: set region 7 as Secure
Secure Boot: SPU: set Flash region 8 as Non-Secure
Secure Boot: SPU: set Flash region 9 as Non-Secure
Secure Boot: SPU: set Flash region 10 as Non-Secure
Secure Boot: SPU: set Flash region 11 as Non-Secure
Secure Boot: SPU: set Flash region 12 as Non-Secure
Secure Boot: SPU: set Flash region 13 as Non-Secure
Secure Boot: SPU: set Flash region 14 as Non-Secure
Secure Boot: SPU: set Flash region 15 as Non-Secure
Secure Boot: SPU: set Flash region 16 as Non-Secure
Secure Boot: SPU: set Flash region 17 as Non-Secure
Secure Boot: SPU: set Flash region 18 as Non-Secure
Secure Boot: SPU: set Flash region 19 as Non-Secure
Secure Boot: SPU: set Flash region 20 as Non-Secure
Secure Boot: SPU: set Flash region 21 as Non-Secure
Secure Boot: SPU: set Flash region 22 as Non-Secure
Secure Boot: SPU: set Flash region 23 as Non-Secure
Secure Boot: SPU: set Flash region 24 as Non-Secure
Secure Boot: SPU: set Flash region 25 as Non-Secure
Secure Boot: SPU: set Flash region 26 as Non-Secure
Secure Boot: SPU: set Flash region 27 as Non-Secure
Secure Boot: SPU: set Flash region 28 as Non-Secure
Secure Boot: SPU: set Flash region 29 as Non-Secure
Secure Boot: SPU: set Flash region 30 as Non-Secure
Secure Boot: SPU: set Flash region 31 as Non-Secure
Secure Boot: configure SRAM
Secure Boot: SPU: set SRAM region 0 as Secure
Secure Boot: SPU: set SRAM region 1 as Secure
Secure Boot: SPU: set SRAM region 2 as Secure
Secure Boot: SPU: set SRAM region 3 as Secure
Secure Boot: SPU: set SRAM region 4 as Secure
Secure Boot: SPU: set SRAM region 5 as Secure
Secure Boot: SPU: set SRAM region 6 as Secure
Secure Boot: SPU: set SRAM region 7 as Secure
Secure Boot: SPU: set SRAM region 8 as Non-Secure
Secure Boot: SPU: set SRAM region 9 as Non-Secure
Secure Boot: SPU: set SRAM region 10 as Non-Secure
Secure Boot: SPU: set SRAM region 11 as Non-Secure
Secure Boot: SPU: set SRAM region 12 as Non-Secure
Secure Boot: SPU: set SRAM region 13 as Non-Secure
Secure Boot: SPU: set SRAM region 14 as Non-Secure
Secure Boot: SPU: set SRAM region 15 as Non-Secure
Secure Boot: SPU: set SRAM region 16 as Non-Secure
Secure Boot: SPU: set SRAM region 17 as Non-Secure
Secure Boot: SPU: set SRAM region 18 as Non-Secure
Secure Boot: SPU: set SRAM region 19 as Non-Secure
Secure Boot: SPU: set SRAM region 20 as Non-Secure
Secure Boot: SPU: set SRAM region 21 as Non-Secure
Secure Boot: SPU: set SRAM region 22 as Non-Secure
Secure Boot: SPU: set SRAM region 23 as Non-Secure
Secure Boot: SPU: set SRAM region 24 as Non-Secure
Secure Boot: SPU: set SRAM region 25 as Non-Secure
Secure Boot: SPU: set SRAM region 26 as Non-Secure
Secure Boot: SPU: set SRAM region 27 as Non-Secure
Secure Boot: SPU: set SRAM region 28 as Non-Secure
Secure Boot: SPU: set SRAM region 29 as Non-Secure
Secure Boot: SPU: set SRAM region 30 as Non-Secure
Secure Boot: SPU: set SRAM region 31 as Non-Secure
Secure Boot: configure peripherals
Secure Boot: MSP_NS 2002b1a0
Secure Boot: prepare to jump to Non-Secure image
***** Booting Zephyr OS v1.13.99-ncs1-5025-g745326266d9c *****
Application started
LTE LC config ...
nrf_cloud_connect failed: -111
***** Booting Zephyr OS v1.13.99-ncs1-5025-g745326266d9c *****
Secure Boot: configure flash
Secure Boot: SPU: set region 0 as Secure
Secure Boot: SPU: set region 1 as Secure
Secure Boot: SPU: set region 2 as Secure
Secure Boot: SPU: set region 3 as Secure
Secure Boot: SPU: set region 4 as Secure
Secure Boot: SPU: set region 5 as Secure
Secure Boot: SPU: set region 6 as Secure
Secure Boot: SPU: set region 7 as Secure
Secure Boot: SPU: set Flash region 8 as Non-Secure
Secure Boot: SPU: set Flash region 9 as Non-Secure
Secure Boot: SPU: set Flash region 10 as Non-Secure
Secure Boot: SPU: set Flash region 11 as Non-Secure
Secure Boot: SPU: set Flash region 12 as Non-Secure
Secure Boot: SPU: set Flash region 13 as Non-Secure
Secure Boot: SPU: set Flash region 14 as Non-Secure
Secure Boot: SPU: set Flash region 15 as Non-Secure
Secure Boot: SPU: set Flash region 16 as Non-Secure
Secure Boot: SPU: set Flash region 17 as Non-Secure
Secure Boot: SPU: set Flash region 18 as Non-Secure
Secure Boot: SPU: set Flash region 19 as Non-Secure
Secure Boot: SPU: set Flash region 20 as Non-Secure
Secure Boot: SPU: set Flash region 21 as Non-Secure
Secure Boot: SPU: set Flash region 22 as Non-Secure
Secure Boot: SPU: set Flash region 23 as Non-Secure
Secure Boot: SPU: set Flash region 24 as Non-Secure
Secure Boot: SPU: set Flash region 25 as Non-Secure
Secure Boot: SPU: set Flash region 26 as Non-Secure
Secure Boot: SPU: set Flash region 27 as Non-Secure
Secure Boot: SPU: set Flash region 28 as Non-Secure
Secure Boot: SPU: set Flash region 29 as Non-Secure
Secure Boot: SPU: set Flash region 30 as Non-Secure
Secure Boot: SPU: set Flash region 31 as Non-Secure
Secure Boot: configure SRAM
Secure Boot: SPU: set SRAM region 0 as Secure
Secure Boot: SPU: set SRAM region 1 as Secure
Secure Boot: SPU: set SRAM region 2 as Secure
Secure Boot: SPU: set SRAM region 3 as Secure
Secure Boot: SPU: set SRAM region 4 as Secure
Secure Boot: SPU: set SRAM region 5 as Secure
Secure Boot: SPU: set SRAM region 6 as Secure
Secure Boot: SPU: set SRAM region 7 as Secure
Secure Boot: SPU: set SRAM region 8 as Non-Secure
Secure Boot: SPU: set SRAM region 9 as Non-Secure
Secure Boot: SPU: set SRAM region 10 as Non-Secure
Secure Boot: SPU: set SRAM region 11 as Non-Secure
Secure Boot: SPU: set SRAM region 12 as Non-Secure
Secure Boot: SPU: set SRAM region 13 as Non-Secure
Secure Boot: SPU: set SRAM region 14 as Non-Secure
Secure Boot: SPU: set SRAM region 15 as Non-Secure
Secure Boot: SPU: set SRAM region 16 as Non-Secure
Secure Boot: SPU: set SRAM region 17 as Non-Secure
Secure Boot: SPU: set SRAM region 18 as Non-Secure
Secure Boot: SPU: set SRAM region 19 as Non-Secure
Secure Boot: SPU: set SRAM region 20 as Non-Secure
Secure Boot: SPU: set SRAM region 21 as Non-Secure
Secure Boot: SPU: set SRAM region 22 as Non-Secure
Secure Boot: SPU: set SRAM region 23 as Non-Secure
Secure Boot: SPU: set SRAM region 24 as Non-Secure
Secure Boot: SPU: set SRAM region 25 as Non-Secure
Secure Boot: SPU: set SRAM region 26 as Non-Secure
Secure Boot: SPU: set SRAM region 27 as Non-Secure
Secure Boot: SPU: set SRAM region 28 as Non-Secure
Secure Boot: SPU: set SRAM region 29 as Non-Secure
Secure Boot: SPU: set SRAM region 30 as Non-Secure
Secure Boot: SPU: set SRAM region 31 as Non-Secure
Secure Boot: configure peripherals
Secure Boot: MSP_NS 2002b1a0
Secure Boot: prepare to jump to Non-Secure image
***** Booting Zephyr OS v1.13.99-ncs1-5025-g745326266d9c *****
Application started
LTE LC config ...
nrf_cloud_connect failed: -111

I also loaded the AT Client and see this:

AT+CFUN?
AT+CFUN?
***** Booting Zephyr OS v1.13.99-ncs1-5025-g745326266d9c *****
Secure Boot: configure flash
Secure Boot: SPU: set region 0 as Secure
Secure Boot: SPU: set region 1 as Secure
Secure Boot: SPU: set region 2 as Secure
Secure Boot: SPU: set region 3 as Secure
Secure Boot: SPU: set region 4 as Secure
Secure Boot: SPU: set region 5 as Secure
Secure Boot: SPU: set region 6 as Secure
Secure Boot: SPU: set region 7 as Secure
Secure Boot: SPU: set Flash region 8 as Non-Secure
Secure Boot: SPU: set Flash region 9 as Non-Secure
Secure Boot: SPU: set Flash region 10 as Non-Secure
Secure Boot: SPU: set Flash region 11 as Non-Secure
Secure Boot: SPU: set Flash region 12 as Non-Secure
Secure Boot: SPU: set Flash region 13 as Non-Secure
Secure Boot: SPU: set Flash region 14 as Non-Secure
Secure Boot: SPU: set Flash region 15 as Non-Secure
Secure Boot: SPU: set Flash region 16 as Non-Secure
Secure Boot: SPU: set Flash region 17 as Non-Secure
Secure Boot: SPU: set Flash region 18 as Non-Secure
Secure Boot: SPU: set Flash region 19 as Non-Secure
Secure Boot: SPU: set Flash region 20 as Non-Secure
Secure Boot: SPU: set Flash region 21 as Non-Secure
Secure Boot: SPU: set Flash region 22 as Non-Secure
Secure Boot: SPU: set Flash region 23 as Non-Secure
Secure Boot: SPU: set Flash region 24 as Non-Secure
Secure Boot: SPU: set Flash region 25 as Non-Secure
Secure Boot: SPU: set Flash region 26 as Non-Secure
Secure Boot: SPU: set Flash region 27 as Non-Secure
Secure Boot: SPU: set Flash region 28 as Non-Secure
Secure Boot: SPU: set Flash region 29 as Non-Secure
Secure Boot: SPU: set Flash region 30 as Non-Secure
Secure Boot: SPU: set Flash region 31 as Non-Secure
Secure Boot: configure SRAM
Secure Boot: SPU: set SRAM region 0 as Secure
Secure Boot: SPU: set SRAM region 1 as Secure
Secure Boot: SPU: set SRAM region 2 as Secure
Secure Boot: SPU: set SRAM region 3 as Secure
Secure Boot: SPU: set SRAM region 4 as Secure
Secure Boot: SPU: set SRAM region 5 as Secure
Secure Boot: SPU: set SRAM region 6 as Secure
Secure Boot: SPU: set SRAM region 7 as Secure
Secure Boot: SPU: set SRAM region 8 as Non-Secure
Secure Boot: SPU: set SRAM region 9 as Non-Secure
Secure Boot: SPU: set SRAM region 10 as Non-Secure
Secure Boot: SPU: set SRAM region 11 as Non-Secure
Secure Boot: SPU: set SRAM region 12 as Non-Secure
Secure Boot: SPU: set SRAM region 13 as Non-Secure
Secure Boot: SPU: set SRAM region 14 as Non-Secure
Secure Boot: SPU: set SRAM region 15 as Non-Secure
Secure Boot: SPU: set SRAM region 16 as Non-Secure
Secure Boot: SPU: set SRAM region 17 as Non-Secure
Secure Boot: SPU: set SRAM region 18 as Non-Secure
Secure Boot: SPU: set SRAM region 19 as Non-Secure
Secure Boot: SPU: set SRAM region 20 as Non-Secure
Secure Boot: SPU: set SRAM region 21 as Non-Secure
Secure Boot: SPU: set SRAM region 22 as Non-Secure
Secure Boot: SPU: set SRAM region 23 as Non-Secure
Secure Boot: SPU: set SRAM region 24 as Non-Secure
Secure Boot: SPU: set SRAM region 25 as Non-Secure
Secure Boot: SPU: set SRAM region 26 as Non-Secure
Secure Boot: SPU: set SRAM region 27 as Non-Secure
Secure Boot: SPU: set SRAM region 28 as Non-Secure
Secure Boot: SPU: set SRAM region 29 as Non-Secure
Secure Boot: SPU: set SRAM region 30 as Non-Secure
Secure Boot: SPU: set SRAM region 31 as Non-Secure
Secure Boot: configure peripherals
Secure Boot: MSP_NS 200265f0
Secure Boot: prepare to jump to Non-Secure image
***** Booting Zephyr OS v1.13.99-ncs2 *****
The AT host sample started
AT+CFUN?
+CFUN: 4
OK
AT+CFUN=1
OK
AT+CFUN?
+CFUN: 1
OK
AT+CGSN=1
+CGSN: "352656100049587"
OK
AT+CGMI
Nordic Semiconductor ASA
OK
AT+CGMM
nRF9160
OK
AT+CGMR
mfw-m1_nrf9160_0.6.8-131.alpha
OK
AT+CEMODE?
+CEMODE: 2
OK
AT%XCBAND=?
%XCBAND: (3,4,13,20)
OK
AT+CMEE?
+CMEE: 0
OK
AT+CMEE=1
OK
AT+CNEC?
+CNEC: 0
OK
AT+CNEC=24
OK
AT+CGEREP?
+CGEREP: 0,0
OK
AT+CGDCONT?
+CGDCONT: 0,"IP","ibasis.iot","10.160.72.248",0,0
OK
AT+CGACT?
+CGACT: 0,1
OK
AT+CGEREP=1
OK
AT+CIND=1,1,1
OK
AT+CEREG=2
OK
AT+CEREG?
+CEREG: 2,5,"BF3F","02EA5B01",7
OK
AT+COPS=3,2
OK
AT+COPS?
+COPS: 0,2,"311480",7
OK
AT%XCBAND
%XCBAND: 13
OK
AT+CGDCONT?
+CGDCONT: 0,"IP","ibasis.iot","10.160.72.248",0,0
OK
AT+CGACT?
+CGACT: 0,1
OK
AT%CESQ=1
OK
AT+CESQ
+CESQ: 99,99,255,255,255,31
OK
AT%XSIM=1
OK
AT%XSIM?
%XSIM: 1
OK
AT+CPIN?
+CPIN: READY
OK
AT+CPINR="SIM PIN"
+CPINR: "SIM PIN",3
OK
AT+CIMI
204080813513522
OK

I have also attached my nRF Connect log file for today.

Fullscreen 2019-04-14T17_04_54.796Z-log.txt Download 
2019-04-14T17:04:56.986Z INFO Application data folder: C:\Users\eriks\AppData\Roaming\nrfconnect\pc-nrfconnect-linkmonitor
2019-04-14T17:04:57.133Z DEBUG App pc-nrfconnect-linkmonitor v0.9.0 official
2019-04-14T17:04:57.133Z DEBUG App path: C:\Users\eriks\.nrfconnect-apps\node_modules\pc-nrfconnect-linkmonitor
2019-04-14T17:04:57.133Z DEBUG nRFConnect 2.6.2 is supported by the app (^2.4.0)
2019-04-14T17:04:57.133Z DEBUG nRFConnect path: C:\Users\eriks\AppData\Local\Programs\nrfconnect\resources\app.asar
2019-04-14T17:04:57.133Z DEBUG HomeDir: C:\Users\eriks
2019-04-14T17:04:57.133Z DEBUG TmpDir: C:\Users\eriks\AppData\Local\Temp
2019-04-14T17:05:03.131Z INFO Modem port is opened
2019-04-14T17:05:03.135Z DEBUG modem >> AT+CFUN?\x0D\x0A
2019-04-14T17:05:30.010Z DEBUG modem << nrf_cloud_connect failed: -111\x0D\x0A
2019-04-14T17:05:30.554Z DEBUG modem << ***** Booting Zephyr OS v1.13.99-ncs1-5025-g745326266d9c *****\x0D\x0A
2019-04-14T17:05:30.561Z DEBUG modem << Secure Boot: configure flash\x0D\x0A
2019-04-14T17:05:30.563Z DEBUG modem << Secure Boot: SPU: set region 0 as Secure\x0D\x0A
2019-04-14T17:05:30.565Z DEBUG modem << Secure Boot: SPU: set region 1 as Secure\x0D\x0A
2019-04-14T17:05:30.570Z DEBUG modem << Secure Boot: SPU: set region 2 as Secure\x0D\x0A
2019-04-14T17:05:30.572Z DEBUG modem << Secure Boot: SPU: set region 3 as Secure\x0D\x0A
2019-04-14T17:05:30.575Z DEBUG modem << Secure Boot: SPU: set region 4 as Secure\x0D\x0A
2019-04-14T17:05:30.578Z DEBUG modem << Secure Boot: SPU: set region 5 as Secure\x0D\x0A
2019-04-14T17:05:30.582Z DEBUG modem << Secure Boot: SPU: set region 6 as Secure\x0D\x0A
2019-04-14T17:05:30.588Z DEBUG modem << Secure Boot: SPU: set region 7 as Secure\x0D\x0A
2019-04-14T17:05:30.591Z DEBUG modem << Secure Boot: SPU: set Flash region 8 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.595Z DEBUG modem << Secure Boot: SPU: set Flash region 9 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.599Z DEBUG modem << Secure Boot: SPU: set Flash region 10 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.605Z DEBUG modem << Secure Boot: SPU: set Flash region 11 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.609Z DEBUG modem << Secure Boot: SPU: set Flash region 12 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.613Z DEBUG modem << Secure Boot: SPU: set Flash region 13 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.617Z DEBUG modem << Secure Boot: SPU: set Flash region 14 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.624Z DEBUG modem << Secure Boot: SPU: set Flash region 15 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.627Z DEBUG modem << Secure Boot: SPU: set Flash region 16 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.631Z DEBUG modem << Secure Boot: SPU: set Flash region 17 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.639Z DEBUG modem << Secure Boot: SPU: set Flash region 18 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.642Z DEBUG modem << Secure Boot: SPU: set Flash region 19 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.647Z DEBUG modem << Secure Boot: SPU: set Flash region 20 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.657Z DEBUG modem << Secure Boot: SPU: set Flash region 21 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.659Z DEBUG modem << Secure Boot: SPU: set Flash region 22 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.663Z DEBUG modem << Secure Boot: SPU: set Flash region 23 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.666Z DEBUG modem << Secure Boot: SPU: set Flash region 24 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.674Z DEBUG modem << Secure Boot: SPU: set Flash region 25 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.677Z DEBUG modem << Secure Boot: SPU: set Flash region 26 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.679Z DEBUG modem << Secure Boot: SPU: set Flash region 27 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.683Z DEBUG modem << Secure Boot: SPU: set Flash region 28 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.691Z DEBUG modem << Secure Boot: SPU: set Flash region 29 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.694Z DEBUG modem << Secure Boot: SPU: set Flash region 30 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.698Z DEBUG modem << Secure Boot: SPU: set Flash region 31 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.700Z DEBUG modem << Secure Boot: configure SRAM\x0D\x0A
2019-04-14T17:05:30.708Z DEBUG modem << Secure Boot: SPU: set SRAM region 0 as Secure\x0D\x0A
2019-04-14T17:05:30.711Z DEBUG modem << Secure Boot: SPU: set SRAM region 1 as Secure\x0D\x0A
2019-04-14T17:05:30.715Z DEBUG modem << Secure Boot: SPU: set SRAM region 2 as Secure\x0D\x0A
2019-04-14T17:05:30.716Z DEBUG modem << Secure Boot: SPU: set SRAM region 3 as Secure\x0D\x0A
2019-04-14T17:05:30.724Z DEBUG modem << Secure Boot: SPU: set SRAM region 4 as Secure\x0D\x0A
2019-04-14T17:05:30.729Z DEBUG modem << Secure Boot: SPU: set SRAM region 5 as Secure\x0D\x0A
2019-04-14T17:05:30.732Z DEBUG modem << Secure Boot: SPU: set SRAM region 6 as Secure\x0D\x0A
2019-04-14T17:05:30.739Z DEBUG modem << Secure Boot: SPU: set SRAM region 7 as Secure\x0D\x0A
2019-04-14T17:05:30.742Z DEBUG modem << Secure Boot: SPU: set SRAM region 8 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.743Z DEBUG modem << Secure Boot: SPU: set SRAM region 9 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.746Z DEBUG modem << Secure Boot: SPU: set SRAM region 10 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.750Z DEBUG modem << Secure Boot: SPU: set SRAM region 11 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.759Z DEBUG modem << Secure Boot: SPU: set SRAM region 12 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.761Z DEBUG modem << Secure Boot: SPU: set SRAM region 13 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.764Z DEBUG modem << Secure Boot: SPU: set SRAM region 14 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.774Z DEBUG modem << Secure Boot: SPU: set SRAM region 15 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.776Z DEBUG modem << Secure Boot: SPU: set SRAM region 16 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.778Z DEBUG modem << Secure Boot: SPU: set SRAM region 17 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.782Z DEBUG modem << Secure Boot: SPU: set SRAM region 18 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.792Z DEBUG modem << Secure Boot: SPU: set SRAM region 19 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.794Z DEBUG modem << Secure Boot: SPU: set SRAM region 20 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.800Z DEBUG modem << Secure Boot: SPU: set SRAM region 21 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.808Z DEBUG modem << Secure Boot: SPU: set SRAM region 22 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.812Z DEBUG modem << Secure Boot: SPU: set SRAM region 23 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.816Z DEBUG modem << Secure Boot: SPU: set SRAM region 24 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.825Z DEBUG modem << Secure Boot: SPU: set SRAM region 25 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.829Z DEBUG modem << Secure Boot: SPU: set SRAM region 26 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.830Z DEBUG modem << Secure Boot: SPU: set SRAM region 27 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.832Z DEBUG modem << Secure Boot: SPU: set SRAM region 28 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.842Z DEBUG modem << Secure Boot: SPU: set SRAM region 29 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.845Z DEBUG modem << Secure Boot: SPU: set SRAM region 30 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.847Z DEBUG modem << Secure Boot: SPU: set SRAM region 31 as Non-Secure\x0D\x0A
2019-04-14T17:05:30.848Z DEBUG modem << Secure Boot: configure peripherals\x0D\x0A
2019-04-14T17:05:30.859Z DEBUG modem << Secure Boot: MSP_NS 2002b1a0\x0D\x0A
2019-04-14T17:05:30.860Z DEBUG modem << Secure Boot: prepare to jump to Non-Secure image\x0D\x0A
2019-04-14T17:05:31.689Z DEBUG modem << ***** Booting Zephyr OS v1.13.99-ncs1-5025-g745326266d9c *****\x0D\x0A
2019-04-14T17:05:31.699Z DEBUG modem << Application started\x0D\x0A
2019-04-14T17:05:31.700Z DEBUG modem << LTE LC config ...\x0D\x0A
2019-04-14T17:05:47.689Z DEBUG modem << nrf_cloud_connect failed: -111\x0D\x0A
2019-04-14T17:05:49.266Z DEBUG modem << ***** Booting Zephyr OS v1.13.99-ncs1-5025-g745326266d9c *****\x0D\x0A
2019-04-14T17:05:49.273Z DEBUG modem << Secure Boot: configure flash\x0D\x0A
2019-04-14T17:05:49.275Z DEBUG modem << Secure Boot: SPU: set region 0 as Secure\x0D\x0A
2019-04-14T17:05:49.277Z DEBUG modem << Secure Boot: SPU: set region 1 as Secure\x0D\x0A
2019-04-14T17:05:49.284Z DEBUG modem << Secure Boot: SPU: set region 2 as Secure\x0D\x0A
2019-04-14T17:05:49.287Z DEBUG modem << Secure Boot: SPU: set region 3 as Secure\x0D\x0A
2019-04-14T17:05:49.290Z DEBUG modem << Secure Boot: SPU: set region 4 as Secure\x0D\x0A
2019-04-14T17:05:49.296Z DEBUG modem << Secure Boot: SPU: set region 5 as Secure\x0D\x0A
2019-04-14T17:05:49.305Z DEBUG modem << Secure Boot: SPU: set region 6 as Secure\x0D\x0A
2019-04-14T17:05:49.307Z DEBUG modem << Secure Boot: SPU: set region 7 as Secure\x0D\x0A
2019-04-14T17:05:49.309Z DEBUG modem << Secure Boot: SPU: set Flash region 8 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.311Z DEBUG modem << Secure Boot: SPU: set Flash region 9 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.321Z DEBUG modem << Secure Boot: SPU: set Flash region 10 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.325Z DEBUG modem << Secure Boot: SPU: set Flash region 11 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.327Z DEBUG modem << Secure Boot: SPU: set Flash region 12 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.329Z DEBUG modem << Secure Boot: SPU: set Flash region 13 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.339Z DEBUG modem << Secure Boot: SPU: set Flash region 14 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.341Z DEBUG modem << Secure Boot: SPU: set Flash region 15 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.344Z DEBUG modem << Secure Boot: SPU: set Flash region 16 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.347Z DEBUG modem << Secure Boot: SPU: set Flash region 17 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.355Z DEBUG modem << Secure Boot: SPU: set Flash region 18 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.367Z DEBUG modem << Secure Boot: SPU: set Flash region 19 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.369Z DEBUG modem << Secure Boot: SPU: set Flash region 20 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.372Z DEBUG modem << Secure Boot: SPU: set Flash region 21 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.374Z DEBUG modem << Secure Boot: SPU: set Flash region 22 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.376Z DEBUG modem << Secure Boot: SPU: set Flash region 23 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.378Z DEBUG modem << Secure Boot: SPU: set Flash region 24 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.390Z DEBUG modem << Secure Boot: SPU: set Flash region 25 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.392Z DEBUG modem << Secure Boot: SPU: set Flash region 26 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.394Z DEBUG modem << Secure Boot: SPU: set Flash region 27 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.406Z DEBUG modem << Secure Boot: SPU: set Flash region 28 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.408Z DEBUG modem << Secure Boot: SPU: set Flash region 29 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.411Z DEBUG modem << Secure Boot: SPU: set Flash region 30 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.413Z DEBUG modem << Secure Boot: SPU: set Flash region 31 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.416Z DEBUG modem << Secure Boot: configure SRAM\x0D\x0A
2019-04-14T17:05:49.425Z DEBUG modem << Secure Boot: SPU: set SRAM region 0 as Secure\x0D\x0A
2019-04-14T17:05:49.427Z DEBUG modem << Secure Boot: SPU: set SRAM region 1 as Secure\x0D\x0A
2019-04-14T17:05:49.438Z DEBUG modem << Secure Boot: SPU: set SRAM region 2 as Secure\x0D\x0A
2019-04-14T17:05:49.440Z DEBUG modem << Secure Boot: SPU: set SRAM region 3 as Secure\x0D\x0A
2019-04-14T17:05:49.444Z DEBUG modem << Secure Boot: SPU: set SRAM region 4 as Secure\x0D\x0A
2019-04-14T17:05:49.448Z DEBUG modem << Secure Boot: SPU: set SRAM region 5 as Secure\x0D\x0A
2019-04-14T17:05:49.450Z DEBUG modem << Secure Boot: SPU: set SRAM region 6 as Secure\x0D\x0A
2019-04-14T17:05:49.452Z DEBUG modem << Secure Boot: SPU: set SRAM region 7 as Secure\x0D\x0A
2019-04-14T17:05:49.460Z DEBUG modem << Secure Boot: SPU: set SRAM region 8 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.463Z DEBUG modem << Secure Boot: SPU: set SRAM region 9 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.474Z DEBUG modem << Secure Boot: SPU: set SRAM region 10 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.480Z DEBUG modem << Secure Boot: SPU: set SRAM region 11 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.485Z DEBUG modem << Secure Boot: SPU: set SRAM region 12 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.495Z DEBUG modem << Secure Boot: SPU: set SRAM region 13 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.500Z DEBUG modem << Secure Boot: SPU: set SRAM region 14 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.502Z DEBUG modem << Secure Boot: SPU: set SRAM region 15 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.503Z DEBUG modem << Secure Boot: SPU: set SRAM region 16 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.505Z DEBUG modem << Secure Boot: SPU: set SRAM region 17 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.507Z DEBUG modem << Secure Boot: SPU: set SRAM region 18 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.508Z DEBUG modem << Secure Boot: SPU: set SRAM region 19 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.510Z DEBUG modem << Secure Boot: SPU: set SRAM region 20 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.512Z DEBUG modem << Secure Boot: SPU: set SRAM region 21 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.515Z DEBUG modem << Secure Boot: SPU: set SRAM region 22 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.517Z DEBUG modem << Secure Boot: SPU: set SRAM region 23 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.521Z DEBUG modem << Secure Boot: SPU: set SRAM region 24 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.532Z DEBUG modem << Secure Boot: SPU: set SRAM region 25 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.536Z DEBUG modem << Secure Boot: SPU: set SRAM region 26 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.538Z DEBUG modem << Secure Boot: SPU: set SRAM region 27 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.540Z DEBUG modem << Secure Boot: SPU: set SRAM region 28 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.544Z DEBUG modem << Secure Boot: SPU: set SRAM region 29 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.555Z DEBUG modem << Secure Boot: SPU: set SRAM region 30 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.558Z DEBUG modem << Secure Boot: SPU: set SRAM region 31 as Non-Secure\x0D\x0A
2019-04-14T17:05:49.560Z DEBUG modem << Secure Boot: configure peripherals\x0D\x0A
2019-04-14T17:05:49.571Z DEBUG modem << Secure Boot: MSP_NS 2002b1a0\x0D\x0A
2019-04-14T17:05:49.574Z DEBUG modem << Secure Boot: prepare to jump to Non-Secure image\x0D\x0A
2019-04-14T17:05:50.280Z DEBUG modem << ***** Booting Zephyr OS v1.13.99-ncs1-5025-g745326266d9c *****\x0D\x0A
2019-04-14T17:05:50.289Z DEBUG modem << Application started\x0D\x0A
2019-04-14T17:05:50.291Z DEBUG modem << LTE LC config ...\x0D\x0A
2019-04-14T17:06:06.407Z DEBUG modem << nrf_cloud_connect failed: -111\x0D
2019-04-14T17:06:07.914Z DEBUG modem << ***** Booting Zephyr OS v1.13.99-ncs1-5025-g745326266d9c *****\x0D
2019-04-14T17:06:07.927Z DEBUG modem << Secure Boot: configure flash\x0D\x0A
2019-04-14T17:06:07.929Z DEBUG modem << Secure Boot: SPU: set region 0 as Secure\x0D\x0A
2019-04-14T17:06:07.931Z DEBUG modem << Secure Boot: SPU: set region 1 as Secure\x0D\x0A
2019-04-14T17:06:07.934Z DEBUG modem << Secure Boot: SPU: set region 2 as Secure\x0D\x0A
2019-04-14T17:06:07.935Z DEBUG modem << Secure Boot: SPU: set region 3 as Secure\x0D\x0A
2019-04-14T17:06:07.938Z DEBUG modem << Secure Boot: SPU: set region 4 as Secure\x0D\x0A
2019-04-14T17:06:07.940Z DEBUG modem << Secure Boot: SPU: set region 5 as Secure\x0D\x0A
2019-04-14T17:06:07.950Z DEBUG modem << Secure Boot: SPU: set region 6 as Secure\x0D\x0A
2019-04-14T17:06:07.953Z DEBUG modem << Secure Boot: SPU: set region 7 as Secure\x0D\x0A
2019-04-14T17:06:07.955Z DEBUG modem << Secure Boot: SPU: set Flash region 8 as Non-Secure\x0D\x0A
2019-04-14T17:06:07.958Z DEBUG modem << Secure Boot: SPU: set Flash region 9 as Non-Secure\x0D\x0A
2019-04-14T17:06:07.971Z DEBUG modem << Secure Boot: SPU: set Flash region 10 as Non-Secure\x0D\x0A
2019-04-14T17:06:07.974Z DEBUG modem << Secure Boot: SPU: set Flash region 11 as Non-Secure\x0D\x0A
2019-04-14T17:06:07.978Z DEBUG modem << Secure Boot: SPU: set Flash region 12 as Non-Secure\x0D\x0A
2019-04-14T17:06:07.981Z DEBUG modem << Secure Boot: SPU: set Flash region 13 as Non-Secure\x0D\x0A
2019-04-14T17:06:07.991Z DEBUG modem << Secure Boot: SPU: set Flash region 14 as Non-Secure\x0D\x0A
2019-04-14T17:06:07.996Z DEBUG modem << Secure Boot: SPU: set Flash region 15 as Non-Secure\x0D\x0A
2019-04-14T17:06:08.006Z DEBUG modem << Secure Boot: SPU: set Flash region 16 as Non-Secure\x0D\x0A
2019-04-14T17:06:08.010Z DEBUG modem << Secure Boot: SPU: set Flash region 17 as Non-Secure\x0D\x0A
2019-04-14T17:06:08.013Z DEBUG modem << Secure Boot: SPU: set Flash region 18 as Non-Secure\x0D\x0A
2019-04-14T17:06:08.022Z DEBUG modem << Secure Boot: SPU: set Flash region 19 as Non-Secure\x0D\x0A
2019-04-14T17:06:08.024Z DEBUG modem << Secure Boot: SPU: set Flash region 20 as Non-Secure\x0D\x0A
2019-04-14T17:06:08.029Z DEBUG modem << Secure Boot: SPU: set Flash region 21 as Non-Secure\x0D\x0A
2019-04-14T17:06:08.039Z DEBUG modem << Secure Boot: SPU: set Flash region 22 as Non-Secure\x0D\x0A
2019-04-14T17:06:08.045Z DEBUG modem << Secure Boot: SPU: set Flash region 23 as Non-Secure\x0D\x0A
2019-04-14T17:06:08.048Z DEBUG modem << Secure Boot: SPU: set Flash region 24 as Non-Secure\x0D\x0A
2019-04-14T17:06:08.050Z DEBUG modem << Secure Boot: SPU: set Flash region 25 as Non-Secure\x0D\x0A
2019-04-14T17:06:08.063Z DEBUG modem << Secure Boot: SPU: set Flash region 26 as Non-Secure\x0D\x0A
2019-04-14T17:06:08.066Z DEBUG modem << Secure Boot: SPU: set Flash region 27 as Non-Secure\x0D\x0A
2019-04-14T17:06:08.068Z DEBUG modem << Secure Boot: SPU: set Flash region 28 as Non-Secure\x0D\x0A
2019-04-14T17:06:08.070Z DEBUG modem << Secure Boot: SPU: set Flash region 29 as Non-Secure\x0D\x0A
2019-04-14T17:06:08.072Z DEBUG modem << Secure Boot: SPU: set Flash region 30 as Non-Secure\x0D\x0A
2019-04-14T17:06:08.085Z DEBUG modem << Secure Boot: SPU: set Flash region 31 as Non-Secure\x0D\x0A
2019-04-14T17:06:08.087Z DEBUG modem << Secure Boot: configure SRAM\x0D\x0A
2019-04-14T17:06:08.090Z DEBUG modem << Secure Boot: SPU: set SRAM region 0 as Secure\x0D\x0A
2019-04-14T17:06:08.094Z DEBUG modem << Secure Boot: SPU: set SRAM region 1 as Secure\x0D\x0A
2019-04-14T17:06:08.096Z DEBUG modem << Secure Boot: SPU: set SRAM region 2 as Secure\x0D\x0A
2019-04-14T17:06:08.098Z DEBUG modem << Secure Boot: SPU: set SRAM region 3 as Secure\x0D\x0A
2019-04-14T17:06:08.112Z DEBUG modem << Secure Boot: SPU: set SRAM region 4 as Secure\x0D\x0A
2019-04-14T17:06:08.114Z DEBUG modem << Secure Boot: SPU: set SRAM region 5 as Secure\x0D\x0A
2019-04-14T17:06:08.116Z DEBUG modem << Secure Boot: SPU: set SRAM region 6 as Secure\x0D\x0A
2019-04-14T17:06:08.118Z DEBUG modem << Secure Boot: SPU: set SRAM region 7 as Secure\x0D\x0A
2019-04-14T17:06:08.120Z DEBUG modem << Secure Boot: SPU: set SRAM region 8 as Non-Secure\x0D\x0A
2019-04-14T17:06:08.122Z DEBUG modem << Secure Boot: SPU: set SRAM region 9 as Non-Secure\x0D\x0A
2019-04-14T17:06:08.133Z DEBUG modem << Secure Boot: SPU: set SRAM region 10 as Non-Secure\x0D\x0A
2019-04-14T17:06:08.135Z DEBUG modem << Secure Boot: SPU: set SRAM region 11 as Non-Secure\x0D\x0A
2019-04-14T17:06:08.138Z DEBUG modem << Secure Boot: SPU: set SRAM region 12 as Non-Secure\x0D\x0A
2019-04-14T17:06:08.141Z DEBUG modem << Secure Boot: SPU: set SRAM region 13 as Non-Secure\x0D\x0A
2019-04-14T17:06:08.144Z DEBUG modem << Secure Boot: SPU: set SRAM region 14 as Non-Secure\x0D\x0A
2019-04-14T17:06:08.155Z DEBUG modem << Secure Boot: SPU: set SRAM region 15 as Non-Secure\x0D\x0A
2019-04-14T17:06:08.157Z DEBUG modem << Secure Boot: SPU: set SRAM region 16 as Non-Secure\x0D\x0A
2019-04-14T17:06:08.161Z DEBUG modem << Secure Boot: SPU: set SRAM region 17 as Non-Secure\x0D\x0A
2019-04-14T17:06:08.163Z DEBUG modem << Secure Boot: SPU: set SRAM region 18 as Non-Secure\x0D\x0A
2019-04-14T17:06:08.165Z DEBUG modem << Secure Boot: SPU: set SRAM region 19 as Non-Secure\x0D\x0A
2019-04-14T17:06:08.180Z DEBUG modem << Secure Boot: SPU: set SRAM region 20 as Non-Secure\x0D\x0A
2019-04-14T17:06:08.183Z DEBUG modem << Secure Boot: SPU: set SRAM region 21 as Non-Secure\x0D\x0A
2019-04-14T17:06:08.185Z DEBUG modem << Secure Boot: SPU: set SRAM region 22 as Non-Secure\x0D\x0A
2019-04-14T17:06:08.187Z DEBUG modem << Secure Boot: SPU: set SRAM region 23 as Non-Secure\x0D\x0A
2019-04-14T17:06:08.191Z DEBUG modem << Secure Boot: SPU: set SRAM region 24 as Non-Secure\x0D\x0A
2019-04-14T17:06:08.193Z DEBUG modem << Secure Boot: SPU: set SRAM region 25 as Non-Secure\x0D\x0A
2019-04-14T17:06:08.195Z DEBUG modem << Secure Boot: SPU: set SRAM region 26 as Non-Secure\x0D\x0A
2019-04-14T17:06:08.197Z DEBUG modem << Secure Boot: SPU: set SRAM region 27 as Non-Secure\x0D\x0A
2019-04-14T17:06:08.199Z DEBUG modem << Secure Boot: SPU: set SRAM region 28 as Non-Secure\x0D\x0A
2019-04-14T17:06:08.210Z DEBUG modem << Secure Boot: SPU: set SRAM region 29 as Non-Secure\x0D\x0A
2019-04-14T17:06:08.214Z DEBUG modem << Secure Boot: SPU: set SRAM region 30 as Non-Secure\x0D\x0A
2019-04-14T17:06:08.224Z DEBUG modem << Secure Boot: SPU: set SRAM region 31 as Non-Secure\x0D\x0A
2019-04-14T17:06:08.228Z DEBUG modem << Secure Boot: configure peripherals\x0D\x0A
2019-04-14T17:06:08.230Z DEBUG modem << Secure Boot: MSP_NS 2002b1a0\x0D\x0A
2019-04-14T17:06:08.232Z DEBUG modem << Secure Boot: prepare to jump to Non-Secure image\x0D\x0A
2019-04-14T17:06:10.135Z DEBUG modem << ***** Booting Zephyr OS v1.13.99-ncs1-5025-g745326266d9c *****\x0D\x0A
2019-04-14T17:06:10.163Z DEBUG modem << Application started\x0D\x0A
2019-04-14T17:06:10.166Z DEBUG modem << LTE LC config ...\x0D\x0A
2019-04-14T17:06:28.410Z DEBUG modem << nrf_cloud_connect failed: -111\x0D\x0A
2019-04-14T17:21:06.609Z INFO Modem port is opened
2019-04-14T17:21:06.614Z DEBUG modem >> AT+CFUN?\x0D\x0A
2019-04-14T17:21:12.033Z DEBUG modem >> AT+CFUN?\x0D\x0A
2019-04-14T17:21:13.034Z ERROR Error: 'AT+CFUN?
' timed out
2019-04-14T17:21:15.137Z DEBUG modem << ***** Booting Zephyr OS v1.13.99-ncs1-5025-g745326266d9c *****\x0D\x0A
2019-04-14T17:21:15.152Z DEBUG modem << Secure Boot: configure flash\x0D\x0A
2019-04-14T17:21:15.156Z DEBUG modem << Secure Boot: SPU: set region 0 as Secure\x0D\x0A
2019-04-14T17:21:15.159Z DEBUG modem << Secure Boot: SPU: set region 1 as Secure\x0D\x0A
2019-04-14T17:21:15.162Z DEBUG modem << Secure Boot: SPU: set region 2 as Secure\x0D\x0A
2019-04-14T17:21:15.164Z DEBUG modem << Secure Boot: SPU: set region 3 as Secure\x0D\x0A
2019-04-14T17:21:15.166Z DEBUG modem << Secure Boot: SPU: set region 4 as Secure\x0D\x0A
2019-04-14T17:21:15.180Z DEBUG modem << Secure Boot: SPU: set region 5 as Secure\x0D\x0A
2019-04-14T17:21:15.182Z DEBUG modem << Secure Boot: SPU: set region 6 as Secure\x0D\x0A
2019-04-14T17:21:15.186Z DEBUG modem << Secure Boot: SPU: set region 7 as Secure\x0D\x0A
2019-04-14T17:21:15.189Z DEBUG modem << Secure Boot: SPU: set Flash region 8 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.191Z DEBUG modem << Secure Boot: SPU: set Flash region 9 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.193Z DEBUG modem << Secure Boot: SPU: set Flash region 10 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.205Z DEBUG modem << Secure Boot: SPU: set Flash region 11 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.208Z DEBUG modem << Secure Boot: SPU: set Flash region 12 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.223Z DEBUG modem << Secure Boot: SPU: set Flash region 13 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.226Z DEBUG modem << Secure Boot: SPU: set Flash region 14 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.229Z DEBUG modem << Secure Boot: SPU: set Flash region 15 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.232Z DEBUG modem << Secure Boot: SPU: set Flash region 16 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.248Z DEBUG modem << Secure Boot: SPU: set Flash region 17 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.251Z DEBUG modem << Secure Boot: SPU: set Flash region 18 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.253Z DEBUG modem << Secure Boot: SPU: set Flash region 19 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.255Z DEBUG modem << Secure Boot: SPU: set Flash region 20 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.257Z DEBUG modem << Secure Boot: SPU: set Flash region 21 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.274Z DEBUG modem << Secure Boot: SPU: set Flash region 22 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.279Z DEBUG modem << Secure Boot: SPU: set Flash region 23 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.281Z DEBUG modem << Secure Boot: SPU: set Flash region 24 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.284Z DEBUG modem << Secure Boot: SPU: set Flash region 25 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.285Z DEBUG modem << Secure Boot: SPU: set Flash region 26 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.287Z DEBUG modem << Secure Boot: SPU: set Flash region 27 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.303Z DEBUG modem << Secure Boot: SPU: set Flash region 28 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.306Z DEBUG modem << Secure Boot: SPU: set Flash region 29 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.308Z DEBUG modem << Secure Boot: SPU: set Flash region 30 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.312Z DEBUG modem << Secure Boot: SPU: set Flash region 31 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.314Z DEBUG modem << Secure Boot: configure SRAM\x0D\x0A
2019-04-14T17:21:15.316Z DEBUG modem << Secure Boot: SPU: set SRAM region 0 as Secure\x0D\x0A
2019-04-14T17:21:15.318Z DEBUG modem << Secure Boot: SPU: set SRAM region 1 as Secure\x0D\x0A
2019-04-14T17:21:15.333Z DEBUG modem << Secure Boot: SPU: set SRAM region 2 as Secure\x0D\x0A
2019-04-14T17:21:15.336Z DEBUG modem << Secure Boot: SPU: set SRAM region 3 as Secure\x0D\x0A
2019-04-14T17:21:15.338Z DEBUG modem << Secure Boot: SPU: set SRAM region 4 as Secure\x0D\x0A
2019-04-14T17:21:15.340Z DEBUG modem << Secure Boot: SPU: set SRAM region 5 as Secure\x0D\x0A
2019-04-14T17:21:15.342Z DEBUG modem << Secure Boot: SPU: set SRAM region 6 as Secure\x0D\x0A
2019-04-14T17:21:15.344Z DEBUG modem << Secure Boot: SPU: set SRAM region 7 as Secure\x0D\x0A
2019-04-14T17:21:15.347Z DEBUG modem << Secure Boot: SPU: set SRAM region 8 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.362Z DEBUG modem << Secure Boot: SPU: set SRAM region 9 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.365Z DEBUG modem << Secure Boot: SPU: set SRAM region 10 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.368Z DEBUG modem << Secure Boot: SPU: set SRAM region 11 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.370Z DEBUG modem << Secure Boot: SPU: set SRAM region 12 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.372Z DEBUG modem << Secure Boot: SPU: set SRAM region 13 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.374Z DEBUG modem << Secure Boot: SPU: set SRAM region 14 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.388Z DEBUG modem << Secure Boot: SPU: set SRAM region 15 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.392Z DEBUG modem << Secure Boot: SPU: set SRAM region 16 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.396Z DEBUG modem << Secure Boot: SPU: set SRAM region 17 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.398Z DEBUG modem << Secure Boot: SPU: set SRAM region 18 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.400Z DEBUG modem << Secure Boot: SPU: set SRAM region 19 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.402Z DEBUG modem << Secure Boot: SPU: set SRAM region 20 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.417Z DEBUG modem << Secure Boot: SPU: set SRAM region 21 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.420Z DEBUG modem << Secure Boot: SPU: set SRAM region 22 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.422Z DEBUG modem << Secure Boot: SPU: set SRAM region 23 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.425Z DEBUG modem << Secure Boot: SPU: set SRAM region 24 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.431Z DEBUG modem << Secure Boot: SPU: set SRAM region 25 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.433Z DEBUG modem << Secure Boot: SPU: set SRAM region 26 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.450Z DEBUG modem << Secure Boot: SPU: set SRAM region 27 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.452Z DEBUG modem << Secure Boot: SPU: set SRAM region 28 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.455Z DEBUG modem << Secure Boot: SPU: set SRAM region 29 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.457Z DEBUG modem << Secure Boot: SPU: set SRAM region 30 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.460Z DEBUG modem << Secure Boot: SPU: set SRAM region 31 as Non-Secure\x0D\x0A
2019-04-14T17:21:15.462Z DEBUG modem << Secure Boot: configure peripherals\x0D\x0A
2019-04-14T17:21:15.464Z DEBUG modem << Secure Boot: MSP_NS 200265f0\x0D\x0A
2019-04-14T17:21:15.466Z DEBUG modem << Secure Boot: prepare to jump to Non-Secure image\x0D\x0A
2019-04-14T17:21:16.254Z DEBUG modem << ***** Booting Zephyr OS v1.13.99-ncs2 *****\x0D\x0A
2019-04-14T17:21:16.270Z DEBUG modem << The AT host sample started\x0D\x0A
2019-04-14T17:21:22.447Z DEBUG modem >> AT+CFUN?\x0D\x0A
2019-04-14T17:21:22.471Z DEBUG modem << +CFUN: 4\x0D\x0A
2019-04-14T17:21:22.484Z DEBUG modem << OK\x0D
2019-04-14T17:21:22.500Z DEBUG modem >> AT+CFUN=1\x0D\x0A
2019-04-14T17:21:22.519Z DEBUG modem << OK\x0D\x0A\x00
2019-04-14T17:21:43.449Z DEBUG modem >> AT+CFUN?\x0D\x0A
2019-04-14T17:21:43.465Z DEBUG modem << +CFUN: 1\x0D\x0A
2019-04-14T17:21:43.475Z DEBUG modem << OK\x0D\x0A\x00
2019-04-14T17:21:43.491Z DEBUG modem >> AT+CGSN=1\x0D\x0A
2019-04-14T17:21:43.513Z DEBUG modem << +CGSN: "352656100049587"\x0D\x0A
2019-04-14T17:21:43.516Z DEBUG modem << OK\x0D\x0A\x00
2019-04-14T17:21:43.535Z DEBUG modem >> AT+CGMI\x0D\x0A
2019-04-14T17:21:43.551Z DEBUG modem << Nordic Semiconductor ASA\x0D\x0A
2019-04-14T17:21:43.555Z DEBUG modem << OK\x0D\x0A\x00
2019-04-14T17:21:43.573Z DEBUG modem >> AT+CGMM\x0D\x0A
2019-04-14T17:21:43.593Z DEBUG modem << nRF9160\x0D\x0A
2019-04-14T17:21:43.598Z DEBUG modem << OK\x0D\x0A\x00
2019-04-14T17:21:43.603Z DEBUG modem >> AT+CGMR\x0D\x0A
2019-04-14T17:21:43.625Z DEBUG modem << mfw-m1_nrf9160_0.6.8-131.alpha\x0D\x0A
2019-04-14T17:21:43.628Z DEBUG modem << OK\x0D\x0A\x00
2019-04-14T17:21:43.631Z INFO Nordic Semiconductor ASA nRF9160 [mfw-m1_nrf9160_0.6.8-131.alpha] SerNr: 352656100049587
2019-04-14T17:21:43.633Z DEBUG modem >> AT+CEMODE?\x0D\x0A
2019-04-14T17:21:43.650Z DEBUG modem << +CEMODE: 2\x0D\x0A
2019-04-14T17:21:43.657Z DEBUG modem << OK\x0D\x0A\x00
2019-04-14T17:21:43.677Z DEBUG modem >> AT%XCBAND=?\x0D\x0A
2019-04-14T17:21:43.697Z DEBUG modem << %XCBAND: (3,4,13,20)\x0D\x0A
2019-04-14T17:21:43.701Z DEBUG modem << OK\x0D\x0A\x00
2019-04-14T17:21:43.725Z DEBUG modem >> AT+CMEE?\x0D\x0A
2019-04-14T17:21:43.746Z DEBUG modem << +CMEE: 0\x0D\x0A
2019-04-14T17:21:43.749Z DEBUG modem << OK\x0D\x0A\x00
2019-04-14T17:21:43.767Z DEBUG modem >> AT+CMEE=1\x0D\x0A
2019-04-14T17:21:43.791Z DEBUG modem << OK\x0D\x0A\x00
2019-04-14T17:21:43.796Z DEBUG modem >> AT+CNEC?\x0D\x0A
2019-04-14T17:21:43.830Z DEBUG modem << +CNEC: 0\x0D
2019-04-14T17:21:43.834Z DEBUG modem << \x0A
2019-04-14T17:21:43.838Z DEBUG modem << OK\x0D\x0A\x00
2019-04-14T17:21:43.857Z DEBUG modem >> AT+CNEC=24\x0D\x0A
2019-04-14T17:21:43.878Z DEBUG modem << OK\x0D\x0A\x00
2019-04-14T17:21:43.883Z DEBUG modem >> AT+CGEREP?\x0D\x0A
2019-04-14T17:21:43.906Z DEBUG modem << +CGEREP: 0,0\x0D\x0A
2019-04-14T17:21:43.910Z DEBUG modem << OK\x0D\x0A\x00
2019-04-14T17:21:43.916Z DEBUG modem >> AT+CGDCONT?\x0D\x0A
2019-04-14T17:21:43.937Z DEBUG modem << +CGDCONT: 0,"IP","ibasis.iot","10.160.72.248",0,0\x0D\x0A
2019-04-14T17:21:43.941Z DEBUG modem << OK\x0D\x0A\x00
2019-04-14T17:21:43.948Z DEBUG modem >> AT+CGACT?\x0D\x0A
2019-04-14T17:21:43.966Z DEBUG modem << +CGACT: 0,1\x0D\x0A
2019-04-14T17:21:43.972Z DEBUG modem << OK\x0D\x0A\x00
2019-04-14T17:21:43.993Z DEBUG modem >> AT+CGEREP=1\x0D\x0A
2019-04-14T17:21:44.011Z DEBUG modem << OK\x0D\x0A\x00
2019-04-14T17:21:44.017Z DEBUG modem >> AT+CIND=1,1,1\x0D\x0A
2019-04-14T17:21:44.035Z DEBUG modem << OK\x0D
2019-04-14T17:21:44.056Z DEBUG modem >> AT+CEREG=2\x0D\x0A
2019-04-14T17:21:44.076Z DEBUG modem << OK\x0D\x0A\x00
2019-04-14T17:21:44.081Z DEBUG modem >> AT+CEREG?\x0D\x0A
2019-04-14T17:21:44.116Z DEBUG modem << +CEREG: 2,5,"BF3F","02EA5B01",7\x0D\x0A
2019-04-14T17:21:44.120Z DEBUG modem << OK\x0D\x0A\x00
2019-04-14T17:21:44.145Z DEBUG modem >> AT+COPS=3,2\x0D\x0A
2019-04-14T17:21:44.164Z DEBUG modem << OK\x0D\x0A\x00
2019-04-14T17:21:44.171Z DEBUG modem >> AT+COPS?\x0D\x0A
2019-04-14T17:21:44.193Z DEBUG modem << +COPS: 0,2,"311480",7\x0D\x0A
2019-04-14T17:21:44.196Z DEBUG modem << OK\x0D\x0A\x00
2019-04-14T17:21:44.202Z DEBUG modem >> AT%XCBAND\x0D\x0A
2019-04-14T17:21:44.225Z DEBUG modem << %XCBAND: 13\x0D
2019-04-14T17:21:44.229Z DEBUG modem << \x0A
2019-04-14T17:21:44.231Z DEBUG modem << OK\x0D\x0A\x00
2019-04-14T17:21:44.256Z DEBUG modem >> AT+CGDCONT?\x0D\x0A
2019-04-14T17:21:44.279Z DEBUG modem << +CGDCONT: 0,"IP","ibasis.iot","10.160.72.248",0,0\x0D\x0A
2019-04-14T17:21:44.283Z DEBUG modem << OK\x0D\x0A\x00
2019-04-14T17:21:44.309Z DEBUG modem >> AT+CGACT?\x0D\x0A
2019-04-14T17:21:44.330Z DEBUG modem << +CGACT: 0,1\x0D\x0A
2019-04-14T17:21:44.333Z DEBUG modem << OK\x0D\x0A\x00
2019-04-14T17:21:44.357Z DEBUG modem >> AT%CESQ=1\x0D\x0A
2019-04-14T17:21:44.377Z DEBUG modem << OK\x0D\x0A\x00
2019-04-14T17:21:44.383Z DEBUG modem >> AT+CESQ\x0D\x0A
2019-04-14T17:21:44.407Z DEBUG modem << +CESQ: 99,99,255,255,255,31\x0D\x0A
2019-04-14T17:21:44.411Z DEBUG modem << OK\x0D\x0A\x00
2019-04-14T17:21:44.433Z DEBUG modem >> AT%XSIM=1\x0D\x0A
2019-04-14T17:21:44.457Z DEBUG modem << OK\x0D
2019-04-14T17:21:44.476Z DEBUG modem >> AT%XSIM?\x0D\x0A
2019-04-14T17:21:44.500Z DEBUG modem << %XSIM: 1\x0D\x0A
2019-04-14T17:21:44.506Z DEBUG modem << OK\x0D\x0A\x00
2019-04-14T17:21:44.529Z DEBUG modem >> AT+CPIN?\x0D\x0A
2019-04-14T17:21:44.551Z DEBUG modem << +CPIN: READY\x0D\x0A
2019-04-14T17:21:44.558Z DEBUG modem << OK\x0D\x0A\x00
2019-04-14T17:21:44.581Z DEBUG modem >> AT+CPINR="SIM PIN"\x0D\x0A
2019-04-14T17:21:44.601Z DEBUG modem << +CPINR: "SIM PIN",3\x0D\x0A
2019-04-14T17:21:44.625Z DEBUG modem << OK\x0D\x0A\x00
2019-04-14T17:21:44.632Z DEBUG modem >> AT+CIMI\x0D\x0A
2019-04-14T17:21:44.657Z DEBUG modem << 204080813513522\x0D\x0A
2019-04-14T17:21:44.661Z DEBUG modem << OK\x0D\x0A\x00
2019-04-14T17:21:44.664Z INFO IMSIdentity: 204080813513522

What's my next step to now resolve this issue?

Thanks,

Erik

Parents
  • 0
    But on nRF Cloud I don't get anything showing the percent of remaining data in my plan, nor do I get a Buy More Data button at the top of the device dashboard.

    Unfortunately this seems to be the case, I can only report the issue for now, hopefully you may have another SIM card you can use for test and continued development for now.

    Best regards,
    Kenneth

Reply
  • 0
    But on nRF Cloud I don't get anything showing the percent of remaining data in my plan, nor do I get a Buy More Data button at the top of the device dashboard.

    Unfortunately this seems to be the case, I can only report the issue for now, hopefully you may have another SIM card you can use for test and continued development for now.

    Best regards,
    Kenneth

Children
Related
Terms of service