This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts

nRF52840-DK onboard Segger J-Link

Hi,

The User Guide v1.3 in Chapter 2 (minimum requirements) states "SEGGER J-Link Software" under "Software requirements".  Is there J-Link software specifically for use with Nordic boards ?

I have already downloaded and installed Segger J-Flash V6.44b.  It is able to detect, connect to and work with my standalone Segger J-Link Plus.  But it is not able to detect the nRF52840-DK.  J-Flash reports "No emulators connected via USB". 

Meanwhile, Device Manager shows the following wtih the nRF52840-DK J-Link USB connected to my Windows 10 PC:

Portable Devices: DAPLINK

Ports (COM & LPT): USB Serial Device (COM12)

Universal Serial Bus devices: WebUSB: CMSIS-DAP

Keil uVision is able to detect and work with the nRF52840-DK, but only with Debug configured as "CMSIS-DAP Debugger".  If I configure Debug as "J-Link / J-Trace Cortex", it reports "Cannot read J-Link version number".

Any advice would be appreciated.

Thanks

Parents Reply Children
Related