Error: Target "NRF52_DK" is not recognized

[Yuvaraj V]

Hi Everyone,

I'm using nrf52832(Master) SOC and the LIS3DH accelerometer(Slave) for my code development.

And i"m using Mbed as a platform to develop a code.

When I run a I2C scanner code, it indicates - Error: Target "NRF52_DK" is not recognized.

But, LED Blinky code works fine.

Please share your suggestions...

#include "mbed.h"

I2C i2c(I2C_SDA , I2C_SCL ); 

int main() {
    printf("\nI2C Scanner");
    
    while(1) {
        int error, address;
        int nDevices;
      
        printf("Scanning...\n");
        
         nDevices = 0;
         
          for(address = 1; address < 127; address++ ) 
          {
            i2c.start();
            error = i2c.write(address << 1); //We shift it left because mbed takes in 8 bit addreses
            i2c.stop();
            if (error == 1)
            {
              printf("I2C device found at address 0x%X", address); //Returns 7-bit addres
              nDevices++;
            }

          }
          if (nDevices == 0)
            printf("No I2C devices found\n");
          else
            printf("\ndone\n");
        
          wait(5);           // wait 5 seconds for next scan
          
            }
        }

Thanks & Regards,

Yuvaraj

[Kenneth]

Sorry, but we do not have experience with this, as Nordic is not involved in the work with mbed-OS.

Feel free to check out the nRF5 SDK instead.

Best regards,
Kenneth

[Yuvaraj V]

Thank you...