Customized advertising frequency configuration.

[Jax]

Hi

I have a project need to be customized advertising frequency and scan in specific frequency

It means nrf52832 could broadcast at specific frequency and scanner also receive at this frequency.

This frequency is out of the stand BLE channel which is small than 2402MHz, like 2388MHz or 2401MHz and bigger than 2748MHz.

Does nrf52832 SDK support this customized config. If it accept, how to do that.

[awneil]

Have you checked the Product Specification to see if the chip hardware supports those frequencies?

Do you want it to behave in other respects like BLE, or is this an entirely proprietary radio interface?

[Jax]

Thanks for your reply.

Sorry about mistake. The 2388MHz is not my option. 

Accrediting to the datasheet https://infocenter.nordicsemi.com/pdf/nRF52832_PS_v1.0.pdf

Chapter 23.14.9 Frequency register is from 2400+FREQUENCY[0..100]
But I don't want to modify register directly.

Does any other way to change this frequency in advertising mode and scanner at specific frequency?

The purpose want to avoid other standard channel broadcast device. Only receive my device broadcast.