Advertisement lost 1 byte

[schef]

Hi guys,

I am using nrf52840 with sdk15.2 and have been experiencing some strange issue. After mobile phone connection to the device i lost 1 byte in advertisement or saying differently my device is advertising 1 byte less.

I am using sdk command

ble_advdata_encode

. Have you ever experienced this kind of issue? Is there something that could trim the data?

Here is my wrapped adv function:

ret_code_t nordic_advertiser_adv_set(uint16_t companyId, uint8_t *data, uint16_t len) {
    ret_code_t err_code;
    ble_advdata_t advdata;
    ble_advdata_service_data_t service_data;

    memset(&advdata, 0, sizeof(advdata));
    advdata.name_type = BLE_ADVDATA_NO_NAME;
    advdata.include_appearance = false;
    advdata.flags = BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE;

    service_data.service_uuid = companyId;
    service_data.data.p_data = data;
    service_data.data.size = len;

    advdata.p_service_data_array = &service_data;
    advdata.service_data_count = 1;

    if (adv_params.primary_phy == BLE_GAP_PHY_CODED) {

        err_code = ble_advdata_encode(&advdata, m_phy_data.adv_data.p_data, &m_enc_phy_len);
        if (err_code != NRF_SUCCESS) {
            return (err_code);
        }
        return (sd_ble_gap_adv_set_configure(&m_adv_handle, &m_phy_data, NULL));
    }

    err_code = ble_advdata_encode(&advdata, m_adv_data.adv_data.p_data, &m_adv_data.adv_data.len);
    if (err_code != NRF_SUCCESS) {
        return (err_code);
    }

    return (sd_ble_gap_adv_set_configure(&m_adv_handle, &m_adv_data, NULL));
}

Thanks

[Joakim Jakobsen]

Hi. 

This sounds strange. 

Are you seeing this when connecting your phone to the device, and then restarting the advertisement while connected to the device?

Or are you connecting to the device, then disconnecting before seeing this misbehaviour of the advertisement?

Best regards, 
Joakim

[schef]

On connect advertisement stops by SDK so i start it again. This is when i see this misbehaviour. I will give more details tomorow.

[Joakim Jakobsen]

Hi. 

schef said:

Is that a known issue that i can't change the packet size live without stopping the advertisement? Do you have any suggestions?

I haven't heard anything about a known issue for this. 
I'm afraid I don't have any suggestions as of now, but I'll do some research and see if I can find anything. 

Could you upload your code where you change the advertising data?

Best regards, 
Joakim

[schef]

I change the adv in 

void func(bool radioActive){
  if (!radioActive) {
        // change adv (the func from the origiran question with the data
        // nordic_advertiser_adv_set with data
  }
}

 from 

ble_radio_notification_init(NRF_APP_PRIORITY_LOW, NRF_RADIO_NOTIFICATION_DISTANCE_800US, func)

[Joakim Jakobsen]

Thanks. 

I'll look into it and get back to you if I find anything.

Best regards, 
Joakim

[schef]

If you have a working example where you change the size live please send me the source.

[Joakim Jakobsen]

I don't think we have an example showing this, but I'll see what I can do. 

Regards