how to send the float to string over ble_nus

[ps_anu]

hi, 

 I am working on temperature sensor i merged the uart and twi sensor , using nrf52832 + Max30205 (temperature sensor) . i am getting  the temperature in float which is printing in debug terminal , how to send the float over ble_nus _send . for that i need to convert into string right . i have done i have converted into string but i am no t receiving any data in nrf toolbox 

       while (m_xfer_done == false);
{
         m_xfer_done = false;
                
		uint8_t reg[2] = {0x00U};
        err_code = nrf_drv_twi_tx(&m_twi,LM75B_ADDR, reg, sizeof(reg), true);
		APP_ERROR_CHECK(err_code);
		while (m_xfer_done == false);
		nrf_delay_ms(5);
		
	        m_xfer_done = false;
		ret_code_t err_code1 = nrf_drv_twi_rx(&m_twi,LM75B_ADDR, &m_sample, sizeof(m_sample));
		APP_ERROR_CHECK(err_code1);
             
     uint16_t tempVal = (m_sample[0] <<  8) | m_sample[1];
          float tempC = tempVal * (0.0390625)/10;
           
      
    threshold= 28;

 if(tempC> threshold )
            {
             length1 = sprintf(str,"%.2f", tempC);
             ble_nus_data_send(&m_nus,str,sizeof(tempC), m_conn_handle);
              NRF_LOG_INFO("Temperature: " "%s%d.%01d", NRF_LOG_FLOAT(tempC));
                     
       
             
                            
  }
     
       
       }
       }
       

[awneil]

ps_anu said:

for that i need to convert into string right

Not necessarily.

ble_nus_data_send() just sends bytes - it neither knows nor cares what those bytes represent.

So you could just send the raw bytes of the float value.

The downside of that, of course, is that you won't be able to just view it on a plain terminal - you will need to software on the receiving end which does understand the format, and can re-assemble those bytes into a float value (and, if required, display them in a meaningful, human-readable form).

This applies to any form of communication - not specific to Nordic or BLE.

ps_anu said:

i have done i have converted into string

This:

length1 = sprintf(str,"%.2f", tempC);

Have you checked that the conversion is actually working?

The following code is still using the length of the original float - not the length of your converted string!

             ble_nus_data_send(&m_nus,str,sizeof(tempC), m_conn_handle);
             NRF_LOG_INFO("Temperature: " "%s%d.%01d", NRF_LOG_FLOAT(tempC));

[ps_anu]

but i want to send the data  over ble in nRF app uart . 

[awneil]

ps_anu said:

nRF app uart

You mean this:

https://play.google.com/store/apps/details?id=com.nordicsemi.nrfUARTv2&hl=en_GB

[ps_anu]

no in nRF toolbox