• State Not Answered
  • Locked Locked
  • Replies 9 replies
  • Subscribers 67 subscribers
  • Views 3115 views
  • Users 0 members are here
Attachments (0)
Nordic Case Info
  • Case ID: 104894
Options
This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

nRf51822-EK and nRF51422-EK not being recognized in Yosemite

Stephan

Hi all,

I'm trying to work on my MacBook Air on BLE. I'm running Windows 7 under VirtualBox and using the new Keil µVision5.

But my problem is that whether the nRF51822-EK nor the nRF51422-EK is detected on Mac OS X 10.10.1 Yosemite. I think the problem is on the Segger driver side because when I get into the JLinkExe Command Tool and enter the "ShowEmuList"-Cmd there isn't any device listed.

The LED right next to the J-LINK IC is blinking all the time, too. I also tried that disable_CDC.sh script but it does not work, too.

Can anyone help me getting the EK's recognized?

Kind regards, Stephan

UPDATE: It definitely worked before with Yosemite on 10.10.0. Can anybody on Yosemite please confirm that? Or is there anyone on Yosemite with the nRF51x22-EK running on Yosemite 10.10.1?

  • 0

    I'm not a Mac user, but this might be helpful to you.

  • 0

    Thanks for your answer but this is not problem with VirtualBox. On my Mac I have Parallels running (also with Win7) and it also doesn't work anymore and this definitely worked before. I programmed this way all the last months.

    I did not update Parallels, I did not update the segger drivers. The only thing I updated was Yosemite 10.10.0 to 10.10.1 and now the evaluation kits won't get recognized anymore. And if they don't get recognized in the Mac OS X they won't be available in the virtual machine.

    UPDATE: I solved it! It was the USB-cable. Once I changed that everything works! Thanks for everyone involved!

  • 0

    I have Yosemite (current) with Parallels (current) working fine with EK, with Jlink -Ultra, with IDAP-Link (CMSIS-DAP with OpenOCD 0.9). Development using Eclipse on OS X. Switch back & forth between OS X and Windows 8 or XP to use nRFGo, no Problem. A few rare time the JlInk-Ultra blink continuously. All I needed to do then was to disconnect (power off) and reconnect. Everything was fine again. The blinking happened only when I boot with the Jlink connected to USB port but only happened a few times.

  • 0 in reply to Nguyen Hoan Hoang

    I can connect my SEGGER J-Link EDU without a problem. It gets detected immediately! But the J-Link OB on the nRF51x22 Boards does not :(

  • 0 in reply to Nguyen Hoan Hoang

    What is the Jlink-OB ? btw. KNRFGO does work with JLINK on OS X so we don't need to switch to Windows to use nRFGo

Related