RSSI values

[GANESHA]

static void ble_evt_handler(ble_evt_t const * p_ble_evt, void * p_context)
{
    ret_code_t err_code;

    switch (p_ble_evt->header.evt_id)
    {
        case BLE_GAP_EVT_CONNECTED:
            NRF_LOG_INFO("Connected");
            bsp_board_led_on(CONNECTED_LED);
            bsp_board_led_off(ADVERTISING_LED);
            m_conn_handle = p_ble_evt->evt.gap_evt.conn_handle;
            err_code = nrf_ble_qwr_conn_handle_assign(&m_qwr, m_conn_handle);
            APP_ERROR_CHECK(err_code);
            err_code = app_button_enable();
            APP_ERROR_CHECK(err_code);
        
         case BLE_GAP_EVT_ADV_REPORT:
            
              NRF_LOG_INFO("RSSI: %d", p_ble_evt->evt.gap_evt.params.adv_report.rssi);
              NRF_LOG_INFO("POWER: %d", p_ble_evt->evt.gap_evt.params.adv_report.tx_power);
            

        case BLE_GAP_EVT_DISCONNECTED:
            NRF_LOG_INFO("Disconnected");
            bsp_board_led_off(CONNECTED_LED);
            m_conn_handle = BLE_CONN_HANDLE_INVALID;
            err_code = app_button_disable();
            APP_ERROR_CHECK(err_code);
            advertising_start();
            break;

        case BLE_GAP_EVT_SEC_PARAMS_REQUEST:
            // Pairing not supported
            err_code = sd_ble_gap_sec_params_reply(m_conn_handle,
                                                   BLE_GAP_SEC_STATUS_PAIRING_NOT_SUPP,
                                                   NULL,
                                                   NULL);
            APP_ERROR_CHECK(err_code);
            break;

        case BLE_GAP_EVT_PHY_UPDATE_REQUEST:
        {
            NRF_LOG_DEBUG("PHY update request.");
            ble_gap_phys_t const phys =
            {
                .rx_phys = BLE_GAP_PHY_AUTO,
                .tx_phys = BLE_GAP_PHY_AUTO,
            };
            err_code = sd_ble_gap_phy_update(p_ble_evt->evt.gap_evt.conn_handle, &phys);
            APP_ERROR_CHECK(err_code);
        } break;

        case BLE_GATTS_EVT_SYS_ATTR_MISSING:
            // No system attributes have been stored.
            err_code = sd_ble_gatts_sys_attr_set(m_conn_handle, NULL, 0, 0);
            APP_ERROR_CHECK(err_code);
            break;

        case BLE_GATTC_EVT_TIMEOUT:
            // Disconnect on GATT Client timeout event.
            NRF_LOG_DEBUG("GATT Client Timeout.");
            err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gattc_evt.conn_handle,
                                             BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
            APP_ERROR_CHECK(err_code);
            break;

        case BLE_GATTS_EVT_TIMEOUT:
            // Disconnect on GATT Server timeout event.
            NRF_LOG_DEBUG("GATT Server Timeout.");
            err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gatts_evt.conn_handle,
                                             BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
            APP_ERROR_CHECK(err_code);
            break;

        default:
            // No implementation needed.
            break;
           
    }
}

i m getting constant RSSI values 32 even if i move far or near 

this is the same example code in ble_peripherals

I HAVE UPDATED MY CODE (i have printed the RSSI values inside the case statement ) STILL I M GETTING RSSI VALUES AS 4 (constant not changing in any case)

[awneil]

GANESHA said:

I HAVE UPDATED MY CODE

That's really unhelpful!

It means that answers which referred to the code as originally posted no longer make sense!

Please don't do that.

But your updeated code has no 'break' at the ends of the 'Connected' and 'Advertising Report' events

    switch (p_ble_evt->header.evt_id)
    {
        case BLE_GAP_EVT_CONNECTED:
            NRF_LOG_INFO("Connected");
            bsp_board_led_on(CONNECTED_LED);
            bsp_board_led_off(ADVERTISING_LED);
            m_conn_handle = p_ble_evt->evt.gap_evt.conn_handle;
            err_code = nrf_ble_qwr_conn_handle_assign(&m_qwr, m_conn_handle);
            APP_ERROR_CHECK(err_code);
            err_code = app_button_enable();
            APP_ERROR_CHECK(err_code);
            
            /* *************** NEED A 'break' HERE ! *************** */
        
         case BLE_GAP_EVT_ADV_REPORT:
            
              NRF_LOG_INFO("RSSI: %d", p_ble_evt->evt.gap_evt.params.adv_report.rssi);
              NRF_LOG_INFO("POWER: %d", p_ble_evt->evt.gap_evt.params.adv_report.tx_power);
            
            /* *************** NEED A 'break' HERE ! *************** */
            

Have you looked at the code which Sunil vignesh suggested?

[GANESHA]

if i m putting break its not printing RSSI Values

[GANESHA]

the code Sunil vignesh suggested uses 2 nrf52800 and i m using only 1

1 nrf52800 and my mobile which is acting as advertiser 

[awneil]

An Advertising Report is only ever going to happen in a Central.

Your code is for a Central - isn't it?

The code which Sunil vignesh suggested is for a Peripheral ...

https://devzone.nordicsemi.com/f/nordic-q-a/49006/regarding-ble_central-examples-and-ble_peripheral-example/194770#194770

[GANESHA]

No sir my code is for peripheral , What to change in the ble_peripheral_app_blinky code to get the rssi value using mobile and nrf52840 dk

[awneil]

GANESHA said:

my code is for peripheral

So it can't possibly work.

The code which Sunil vignesh suggested is for a Peripheral