Provisioning issue for more than 5 devices using nRF Mesh App with iphone and Android

[Sash]

Hi, I'm using nRF Mesh App to provision more than 5 devices for vendor specific models other than on/off model. My purpose is to send some data instead of on/off the light. The provision process stops in 87% for 6th device.can you please give me the solution.

[Edvin]

Can you check the log on the nRF that fails? What does it say?

[Sash]

It stops after service discovery

[Edvin]

Does it throw an error?

[Sash]

Error does not appear but it stops after device discovery in provision process with 87%

[Edvin]

Ok, I actually meant on the nRF (nRF52832 or nRF52840). Can you try to debug the device, and see what it says when the nRF Mesh app stops at 87%?

[Sash]

It is on nRF52840 board. I just attached provisioning process log here. can you give me the solution based on this log?

<t:        604>, main.c,  254, Initializing and adding models
<t:       5928>, main.c,  463, Device UUID : 00590000000000005D31935971268614
<t:     742289>, main.c,  243, Successfully updated connection parameters
<t:       1080>, main.c,  121, Successfully provisioned
<t:       1085>, main.c,  129, Node Address: 0x0122 
<t:      66831>, proxy.c,  572, Connected
<t:      80396>, main.c,  243, Successfully updated connection parameters
<t:     167879>, proxy.c,  598, TX ready
<t:     183612>, proxy.c,  611, TX complete
<t:     215062>, proxy.c,  603, RX
<t:     215067>, proxy.c,  546, RX GATT PDU type 0x0, len 21