ble_gap_cfg_device_name_t USAGE

[arshdeep]

Hi,

We have a requirement of reading the BLE Advertising name from flash instead of predefining it in as a MACRO.  I saw in the notes it says to use ble_gap_cfg_device_name_t. But I don't know the actual usage of it. Can you please direct me to an example where this API has been used.  

I have seen the structure reference for this but I am still not sure where and how to use it. 

Shall I remove SVCALL(SD_BLE_GAP_DEVICE_NAME_SET, uint32_t, sd_ble_gap_device_name_set(ble_gap_conn_sec_mode_t const *p_write_perm, uint8_t const *p_dev_name, uint16_t len)); from my code and add ble_gap_cfg_device_name_t ?? 

using nrf52840 and SDK 15.0.0

Please suggest!!

Thanks

[Jimmy Wong]

HI,

I did the example at https://github.com/jimmywong2003/nrf5-modify-device-parameter-through-host based on the reference from nRF Thingy.

It can use the nRF Connect to change the following parameters.

1. Device name [R/W]
2. Advertising interval [R/W]
3. Connection parameter (minimum connection interval, maximum connection interval) [R/W]
4. FW version (Read only)
5. Configure the MTU length [R/W]