• State Not Answered
  • Replies 8 replies
  • Subscribers 69 subscribers
  • Views 1378 views
  • Users 0 members are here
Attachments (1) Download All
Nordic Case Info
  • Case ID: 231205
Options
This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts

BT840E module programming issue

PEPL

IDE: Segger Embedded Studio for ARM V4.12  ,   nRFgo studio

SDK: nRF5_SDK_15.2.0_9412b96 + SDK for Mesh3.1.0,

Softdevice: 6.1.1

Computer Platform: Windows 8 64 Bit

Hardwares: 1 NRF52 Development Board,  2 BT840E modules

RTT viewer:J-link RTT Viewer V6.40

While programming module, below error encounters.. 

Also tried from windows command prompt, but no success and log file as attach here..

log_error.log

Parents
  • 0

    Please correct me if I'm wrong. 

    You have 2 setups, both with the BT840E module. And on one of the custom board, the module worked fine and you don't have any problem to program it. But on the other custom board, you can't program it ? 

    If it's the case, I would suggest to double check the PCB and soldering, connection.  It's more likely a hardware issue. 

Reply
  • 0

    Please correct me if I'm wrong. 

    You have 2 setups, both with the BT840E module. And on one of the custom board, the module worked fine and you don't have any problem to program it. But on the other custom board, you can't program it ? 

    If it's the case, I would suggest to double check the PCB and soldering, connection.  It's more likely a hardware issue. 

Children
No Data
Related