Warning: USING OUT OF TREE BOARD

[Yusuke]

I deleted nrf-related files and set up nrf programs from a scratch following Get Started Assistant of nRF Connect v3.0.0

I've got this warning when I opened a project by "Open nRF Connect SDK Project".

SEGGER Embedded Studio v.4.18

How can I solve this?

Zephyr version: 1.14.99
USING OUT OF TREE BOARD
nrf9160_pca10090ns.dts.pre.tmp:269.19-275.3: Warning (unique_unit_address_if_enabled): /soc/peripheral@40000000/clock@5000: duplicate unit-address (also used in node /soc/peripheral@40000000/power@5000)

warning: MQTT_LIB_TLS (defined at subsys/net/lib/mqtt/Kconfig:30) was assigned the value 'y' but got
the value 'n'. You can check symbol information (including dependencies) in the 'menuconfig'
interface (see the Application Development Primer section of the manual), or in the Kconfig
reference at http://docs.zephyrproject.org/latest/reference/kconfig/CONFIG_MQTT_LIB_TLS.html (which
is updated regularly from the master branch). See the 'Setting configuration values' section of the
Board Porting Guide as well.

/Users/fukuharayuusuke/Documents/nRF9160/ncs/nrf/applications/asset_tracker/prj.conf:13: warning: attempt to assign the value 'y' to the undefined symbol MQTT_SOCKET_LIB

/Users/fukuharayuusuke/Documents/nRF9160/ncs/nrf/applications/asset_tracker/prj.conf:15: warning: attempt to assign the value '2048' to the undefined symbol MQTT_MAX_PACKET_LENGTH

/Users/fukuharayuusuke/Documents/nRF9160/ncs/nrf/applications/asset_tracker/prj.conf:19: warning: attempt to assign the value 'y' to the undefined symbol LTE_LINK_CONTROL

/Users/fukuharayuusuke/Documents/nRF9160/ncs/nrf/applications/asset_tracker/prj.conf:20: warning: attempt to assign the value 'n' to the undefined symbol LTE_AUTO_INIT_AND_CONNECT

/Users/fukuharayuusuke/Documents/nRF9160/ncs/nrf/applications/asset_tracker/prj.conf:23: warning: attempt to assign the value 'y' to the undefined symbol MODEM_INFO

/Users/fukuharayuusuke/Documents/nRF9160/ncs/nrf/applications/asset_tracker/prj.conf:26: warning: attempt to assign the value 'y' to the undefined symbol BSD_LIBRARY

/Users/fukuharayuusuke/Documents/nRF9160/ncs/nrf/applications/asset_tracker/prj.conf:29: warning: attempt to assign the value 'y' to the undefined symbol NRF_CLOUD

/Users/fukuharayuusuke/Documents/nRF9160/ncs/nrf/applications/asset_tracker/prj.conf:36: warning: attempt to assign the value 'y' to the undefined symbol DK_LIBRARY

/Users/fukuharayuusuke/Documents/nRF9160/ncs/nrf/applications/asset_tracker/prj.conf:37: warning: attempt to assign the value 'n' to the undefined symbol DK_LIBRARY_INVERT_LEDS

/Users/fukuharayuusuke/Documents/nRF9160/ncs/nrf/applications/asset_tracker/prj.conf:50: warning: attempt to assign the value '1024' to the undefined symbol GPS_SIM_THREAD_STACK_SIZE

Error: Aborting due to non-whitelisted Kconfig warning
'/Users/fukuharayuusuke/Documents/nRF9160/ncs/nrf/applications/asset_tracker/prj.conf:13: warning:
attempt to assign the value 'y' to the undefined symbol MQTT_SOCKET_LIB'. Note: If this warning
doesn't point to an actual problem, you can add it to the whitelist at the top of
/Users/fukuharayuusuke/Documents/nRF9160/ncs/zephyr/scripts/kconfig/kconfig.py.

CMake Error at /Users/fukuharayuusuke/Documents/nRF9160/ncs/zephyr/cmake/kconfig.cmake:200 (message):
  command failed with return code: 1
Call Stack (most recent call first):
  /Users/fukuharayuusuke/Documents/nRF9160/ncs/zephyr/cmake/app/boilerplate.cmake:529 (include)
  CMakeLists.txt:11 (include)

When I use SEGGER Embedded Studio v.4.16, there is no error.

[Øyvind]

Hello, 

In SES v4.18, what is the Zephyr base path? Make sure that it is set to: /Users/username/Documents/nRF9160/ncs/Zephyr

Kind regards,
Øyvind

[Yusuke]

Hi, Oyvind!

This is my setting

Tools > options > nRF Connect

[Yusuke]

When I open a project file, the warning shows up, not when it's built. Please read the first post

[Øyvind]

The last outputs you provided did not have the same warnings. Have you fixed the issue?

[Yusuke]

Please see these pictures.

[Håkon Alseth]

Hi Yusuke,

 

Given the error messages, it seems that you are trying to run with config entries that are not present in master:

https://github.com/NordicPlayground/fw-nrfconnect-nrf/blob/master/applications/asset_tracker/prj.conf

 

Please delete the build folder, and check that you have not pulled in any changes.

 

Kind regards,

Håkon

[Yusuke]

I did as you told me, but the same result

- delete the build foler

- copy the original codes in prj.conf and paste it on local asset_tracker project

- open the local asset_tracker

[Håkon Alseth]

Have you done any other changes that needs to be reverted?

"git status" should give you a list of untracked and changed files.

 

Kind regards,

Håkon

[Yusuke]

$ git status
On branch master
Your branch is behind 'origin/master' by 10 commits, and can be fast-forwarded.
  (use "git pull" to update your local branch)
Changes not staged for commit:
  (use "git add <file>..." to update what will be committed)
  (use "git checkout -- <file>..." to discard changes in working directory)

	modified:   asset_tracker/prj.conf
	modified:   ../samples/nrf9160/gps/src/main.c

Untracked files:
  (use "git add <file>..." to include in what will be committed)

	../samples/nrf9160/at_client/build_nrf9160_pca10090ns/
	../samples/nrf9160/gps/build_nrf9160_pca10090ns/
	../samples/nrf9160/i2c_accel/
	../samples/nrf9160/mqtt_lte-m/
	../samples/nrf9160/mqtt_publish/
	../samples/nrf9160/mqtt_publish_wifi/
	../samples/nrf9160/mqtt_simple/build_nrf9160_pca10090/
	../samples/nrf9160/mqtt_simple/build_nrf9160_pca10090ns/
	../samples/nrf9160/mqtt_simple_aws_iot/
	../samples/nrf9160/mqtt_simple_aws_iot_deden/
	../samples/nrf9160/mqtt_simple_edrx/
	../samples/nrf9160/mqtt_simple_edrx_at_client/
	../samples/nrf9160/mqtt_simple_fake_gps_test/
	../samples/nrf9160/mqtt_simple_fake_gps_test_tls/
	../samples/nrf9160/mqtt_simple_gps/
	../samples/nrf9160/mqtt_simple_simple_at/
	../samples/nrf9160/mqtt_simple_tls/
	../samples/nrf9160/no_function/
	../samples/nrf9160/ntp/
	../samples/nrf9160/simple_at/
	../samples/nrf9160/sms_edrx_at_client/
	../samples/nrf9160/uart/

no changes added to commit (use "git add" and/or "git commit -a")

prj.conf of asset_tracker is modified because I copied an pasted on it.

[Håkon Alseth]

Go into path/to/ncs/nrf, and write "git stash" - this will stash your changes, and if you want them back, you can check out the same branch and write "git stash pop".

Then write:

git checkout master

git pull

git checkout v1.0.0

west update

 

If there is any errors, please post them here.

 

Kind regards,

Håkon