This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

J-Link RTT for easy debug prints

Not really a question, but it took me way to long to find out about J-Link RTT (i.e. j-link Real Time Terminal for easy debug printing so I thought I would mention it for future searchers on the subject.

If you have been using serial to get trace output on the dev boards and are looking for an option to get multiple channels of text output (and input!) with just a few .c files on your target device, you might want to check it out:

www.segger.com/jlink-real-time-terminal.html

Also really loving the Tag-Connect form factor for connecting my little target board to J-Link if you haven't checked it out.

Parents
  • Is there a way to easily remap the "app_trace_log"/"APPL_LOG"-calls (which are just printf) to J-Link RTT)? According to the SEGGER-Website you would just have to include the "RTT_Syscalls_KEIL.c" to remap printf, but at least in my setup this didn't work out of the box... Any ideas?

Reply
  • Is there a way to easily remap the "app_trace_log"/"APPL_LOG"-calls (which are just printf) to J-Link RTT)? According to the SEGGER-Website you would just have to include the "RTT_Syscalls_KEIL.c" to remap printf, but at least in my setup this didn't work out of the box... Any ideas?

Children
No Data
Related