• State Verified Answer
  • Locked Locked
  • Replies 6 replies
  • Subscribers 67 subscribers
  • Views 2646 views
  • Users 0 members are here
Attachments (0)
Nordic Case Info
  • Case ID: 104998
Options
This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Program burning problem

Parvi

Hi everyOne , i have been trying to upload my hex file into my controller, but every time i click the "Load" option in KeiluVision a window pops out..! it shows " No Cortex-M Device found in JTAG chain. Please check the JTAG cable and the connected devices." could anyone help meee ?? regards: parvi

Parents
  • 0

    Try loading your hex file directly from nRFgo Studio. After you connect your device select the nRF51 Programming tab under Device Manager in nRFgo Studio. You should be able to browse your computer for the hex file generated after compiling in uVision and then load this to your MCU. Make sure you load it to the correct region of memory (softdevice to region 0 and application code to region 1).

Reply
  • 0

    Try loading your hex file directly from nRFgo Studio. After you connect your device select the nRF51 Programming tab under Device Manager in nRFgo Studio. You should be able to browse your computer for the hex file generated after compiling in uVision and then load this to your MCU. Make sure you load it to the correct region of memory (softdevice to region 0 and application code to region 1).

Children
No Data
Related