How to re-provision a node to same address with nRF52840 DK board in mesh

[Sash]

i'm using nRF mesh sdk v2.1.1 with 2 boards and 1 provisioner board. I have un-provisioned 1 board with the help of config_client_node_reset().  I want to know the procedure to re-provision the unprovisioned node with same address.Please give me solution.

[Hung Bui]

Hi, 

Mesh spec has no guide regarding this. By the spec, the address of a newly provisioned node should be the increment of the last provisioned node. 

But it should be possible to provision with the previous address. You need to modify the provisioner code to store the database and when you re-provision the unprovisioned node you use the same address. 

[Sash]

<t: 461821>, provisioner_helper.c, 287, Scanning For Unprovisioned Devices
<t: 461857>, main.c, 118, Flash write complete
<t: 532066>, main.c, 702, Button 4 pressed
<t: 532068>, main.c, 716, ----- Node reset -----
<t: 532078>, main.c, 721, ----- Press reset button or power cycle the device -----
<t: 532081>, main.c, 728, Setup start after reset
<t: 532083>, main.c, 731, Waiting for node to be provisioned ...
<t: 532086>, provisioner_helper.c, 287, Scanning For Unprovisioned Devices
<t: 534849>, main.c, 146, Flash remove complete
<t: 535156>, main.c, 460, Config client event
<t: 613530>, provisioner_helper.c, 144, UUID seen: 0059000000000000975B2B98BE9A8FF2
<t: 613533>, provisioner_helper.c, 95, UUID filter matched
<t: 614293>, provisioner_helper.c, 264, Provisioning link established
<t: 693378>, provisioner_helper.c, 259, Static authentication data provided
<t: 704892>, provisioner_helper.c, 192, Provisioning completed received
<t: 704895>, provisioner_helper.c, 197, Adding device address, and device keys
<t: 704898>, provisioner_helper.c, 200, Address: 0x0100
<t: 704900>, provisioner_helper.c, 203, devkey_handle:0
<t: 627593>, app_error_weak.c, 103, Mesh error 15 at 0x00027FF1

(Error in line:\provisioner\src\provisioner_helper.c:203)

It seems device key handle gets 0 if i reset the node and re-provision it.How to solve this problem

[Hung Bui]

I saw in the log you post ealier, there is some log about node reset on the provisioner for example: 

<t: 532066>, main.c, 702, Button 4 pressed
<t: 532068>, main.c, 716, ----- Node reset -----
<t: 532078>, main.c, 721, ----- Press reset button or power cycle the device -----
<t: 532081>, main.c, 728, Setup start after reset 
<t: 532083>, main.c, 731, Waiting for node to be provisioned ...
<t: 532086>, provisioner_helper.c, 287, Scanning For Unprovisioned Devices

Please explain this. 

Regarding devkey_handle, please debug the call to dsm_devkey_add() inside NRF_MESH_PROV_EVT_COMPLETE event handler in prov_evt_handler(). And check if the p_devkey in that call, would be exactly the same at the p_devkey when you first provision the device. Also please check if dsm_devkey_add () return NRF_SUCCESS or it actually return NRF_ERROR_FORBIDDEN

What I can see in the code of dsm_devkey_add is that if the address is already inside the list of device keys, then the call dev_key_handle_get() will return the handle and it will trigger  NRF_ERROR_FORBIDDEN. 

You would need to make sure the address is removed from the device key list. 

[Sash]

when provision first time the devkey is 9D F7 CC 2D C8 E8 B4 AA 66 C7 DC 41 40 9D AD 4E 00 and p_devkey address is 0x200036E0. After re-provision with same node address the devkey becomes AA 36 22 75 76 7D 55 34 4A 75 33 13 42 A8 1A 8E 00 and p_devkey address is  0x200036E0. how to remove the address from device key list.

[Hung Bui]

Call this dsm_devkey_delete() 

[Sash]

where should i need to call this dsm_devkey_delete() 

[Hung Bui]

When you remove the node (calling config_client_node_reset() ) you can delete the device key in the dsm list on the provisioner by calling dsm_devkey_delete()

[Sash]

ok, what you saying is, i have to call sdm_devkey_delete() after config_client_code_reset() in provisioner main.c but the dsm_devkey)delete() contains handle parameter. dsm_clear() will not delete this devkey?

[Hung Bui]

I'm not sure why you mention dsm_clear() here ?

dsm_clear() is to be called on the provisionee (the node to be removed) not the provisioner. 

[Sash]

ok i understand about dsm_clear() now, should i call dsm_devkey_delete() next to config_client_node_rest() in provisioner main.c

[Hung Bui]

Yes, correct. 

[Sash]

devkey for first provisioned node is not deleted if i use dsm_devkey_delete().