Hi,
I just got the brand new Thingy:91 and would like to program it with an application earlier developed for the nrf9160 DK.
Further I'd like to use the Link Monitor applicaton in nRF Connect.
There is not a lot of info about the :91 (probably only a few folks has got it - and it's currently vacation times - at least in Sweden and Norway :-)
I was informed a couple of months back that the Thingy:91 was programmable via USB. Is this really the case, or do I need to go through the DK (like this: https://devzone.nordicsemi.com/f/nordic-q-a/35364/nordic-thingy-52-nrf52840-dk/135974#135974) ?
Unfortunately I don't have that cable and would like to test things out before waiting a week to receive it.
USB
The Thingy:91 shows up as "Bus 003 Device 026: ID 1915:520f Nordic Semiconductor ASA" and registers /dev/ttyACM0 and /dev/ttyACM1.
The nRF9160 DK shows up as "Bus 003 Device 023: ID 1366:1055 SEGGER".
Is there some nRF-specific driver available?
NFC/Bluetooth
The stock firmware does not advertise on BLE and NFC is not enabled (does not show up when scanning with NFC reader like Thingy:52).
The Thingy:52 could be DFUed via BLE, but I guess that's out of the question for now.
Getting started guide
The getting started page nordicsemi.com/thingy91 is not (yet) available.
So... basically I'm in the dark as of now.
