how to qualification with replace PHY QDID using endproduct SoftDevice QDID?

[junichiro okabe]

Hi,
I'm trying to make a SIG qualification Project.
QDID97989 (nRF52 S132 V5.0.0) with replace PHY QDID97482(TaiyoYuden module).
Launch Studio Project type is "qualification Project with No Required Testing".
but, Launch Studio generate error .

I hope you can point me  the way to solve this.

-- j.Okabe--

[bjorn-spockeli]

Hi Okabe-san, 

You cannot combine a component QDID with a End Product QDID, you need to create a new End Product QDID with the required tested components.

Since Taiyo Juden only provides the RF-PHY layer as a qualified component you need to refer to the Host and Link Layer components for the S132 v5.0.0 in addition to the RF-PHY

S132 Link Layer 5.0.0

QDID: 93865

https://launchstudio.bluetooth.com/ListingDetails/25165

S132 nRF52 5.0.0 Host Layer

QDID: 94418

https://launchstudio.bluetooth.com/ListingDetails/14829

If you are using any of the Bluetooth SIG services, i.e. a Service with a 16-bit UUID (e.g. Battery Service, Device Information Service) then you also need to refer to  our profile subsystem, https://launchstudio.bluetooth.com/ListingDetails/12505

Best regards

Bjørn