• State Not Answered
  • Locked Locked
  • Replies 7 replies
  • Subscribers 67 subscribers
  • Views 8161 views
  • Users 0 members are here
Attachments (0)
Nordic Case Info
  • Case ID: 105167
Options
This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

no jlink device found

stevechen

I am using the usb port to download an example project to the NRF development kit board, with Keil4. Somehow it keep telling that "No jlink device found", in Keil, the project-->"options for target.."part, I set it to use "J-link/J-trace cortex", is that correct?

Thanks for any help!!

Best,

Parents
  • 0

    I have this same problem. I cannot see the SN in the "Cortex Jlink/JTrace Target Driver Setup" window. nRF Go studio can see the Segger device though. (I'm not sure if it's related, but uVision complains about missing software packs which actually are installed in 'Pack Installer'. The project builds without error.)

Reply
  • 0

    I have this same problem. I cannot see the SN in the "Cortex Jlink/JTrace Target Driver Setup" window. nRF Go studio can see the Segger device though. (I'm not sure if it's related, but uVision complains about missing software packs which actually are installed in 'Pack Installer'. The project builds without error.)

Children
No Data
Related