Android DFU library

[yangamin]

答复 答复 转发 Android DFU library.msg

Hi!We used a 52832 to make a bracelet. Now some apps on Huawei phones can't be remotely upgraded by the ring. We have verified that Nordic's official Android DFU library throws a bug in the firmware upgrade. Therefore, during the upgrade process, whether the mobile phone is sent incompletely or the wristband is not completely received, our APP cannot be detected here.Before using nRF Sniffer to capture packets, there is no data during the upgrade process.Before using nRF Sniffer to capture packets, there is no data during the upgrade process.Above have our software testing environment, please check.
According to the log of nova 2s combined with the DFU library code analysis, the following is the error when the data is verified.
The error is as follows:
Sending Calculate Checksum command (Op Code = 3)
08-27 11:38:24.029 1637 1802 W bt_btif : HAL bt_gatt_callbacks->client->notify_cb
08-27 11:38:24.030 7911 8203 I DfuImpl : Checksum received (Offset = 256, CRC = 975ECD47)
08-27 11:38:24.030 7911 8203 W DfuImpl : 3840 bytes were lost!
08-27 11:38:24.031 7911 8203 I DfuImpl : CRC does not match! Expected 491D1F48 but found 975ECD47. Retrying...(3/3)
The program sends the data three times and reports the same error.
The judgment is that the receiving firmware data is incomplete and the upgrade fails.

Is DFU lib usage problem or data compatibility issue? Is there a solution?
Thank you for your reply!

[Hung Bui]

Hi Yangamin, 

It's quite hard to understand what you describing. 

From the log it seems that the CRC was incorrect. 

Could you provide the whole logging data ? 

Which image did you use to test ? Which SDK did you use ? Do you have any modification to the bootloader ? 

Could you provide the sniffer trace ? 

[yangamin]

Hi Hung Bui,

In short, the wristband APP on Huawei mobile phones cannot be remotely upgraded by the ring, Is it a problem with DFU lib?

Answer your questions:

1.Attachment 1 is to use nrf sniffer to obtain data for non-Huawei mobile phone opponent ring upgrade, the MAC address is c8:d4:1d:72:1d:ac;
Attachment 2 is the data of Huawei mobile phone opponent ring upgrade, the MAC address is d0:77:21:0c:14:cc, the data transmission process fails  and the error is "remote dfu not supported". 

2.What is mean "image"?The SDK we use is 12.3, the bootloader data mainly changes the display and timeout restart part.

c8.pcapngd0.pcapng

[Hung Bui]

Hi Yangamin, 

By "image" I meant the DFU image/firmware you use to update. The firmware inside the .zip file. 

So what you meant was that if you use non- Huawei phone, you can do DFU update on the ring , but if do DFU update on the Huawei phone, you can't do DFU update  ?

Have you tried DFU using the nRFToolbox DFU app ?  In the sniffer trace you provided (d0.pcapng) there was no connection. Only advertising packets. Please make sure you capture the connection. 

Please try to record the phone's screen when you do DFU, also please try capture a new sniffer trace.  

[yangamin]

Hi Hung Bui,

The following models of HUAWEI mobile phone upgrades have failed:
Hai Si Kirin 970: Glory V10\Note 10\Play, Huawei P20 Pro\nova 3\Mate 10

Kirin 659: Glory 9 Youth Edition \ Play 7X \ Mai Mang 6 \nova 2 \nova 3e \ Enjoy 7s

Kirin 960:nova 2S, glory 9

You said that the nRFToolbox DFU tool upgrade package failed to upload. I checked it. This tool is only suitable for Q8 smart bracelet upgrade.

The data packet we obtained with nrf sniffer d0:77:21:0c:14:cd should be the data of the upgrade process, please answer this question, if my way is wrong, please guide.Attachment is the upgrade process video, please check.Thank you!

[Hung Bui]

I'm not familiar with the app you showed. I'm not sure what exactly the app doing. 

You would need to describe me:

- How does the DFU process should work ? Could you describe a normal DFU update process as you know ? 

- Do you use our bootloader or use your own bootloader ?

- Is it buttonless update or it requires switching to bootloader via a button press ? 

- We can't really read Chinese so it's harder for us to understand what you show. I would suggest you to contact our local FAE to get more help. Do you have contact to our local support in china ? 

- The sniffer trace d0.pcapng doesn't contain any data about a connection, it only has the advertising packets which don't help much. 

- Please try to test using nRFToolbox/nRFConnect and record the screen.