asset tracker, configure for GPS and accelerometer real readings

[deadpoolcode]

I am using PCA10090, version with active GPS (tested using GPS sample)

I tried configuring using: 

vi /nrf_root/ncs/nrf/applications/asset_tracker/build_nrf9160_pca10090ns/zephyr/.config

CONFIG_GPS_USE_SIM=y -> CONFIG_GPS=y
CONFIG_ACCEL_USE_SIM=y -> CONFIG_ACCEL=y

and rebuilt the project on Segger, however I see no effect, data is still simulated only

please advice how and where to modify to support real GPS data and real data from accelerometer

thank you 

[Oivind Nielsen]

Hi deadpoolcode,

You need to configure these in the prj.conf file in /nrf_root/ncs/nrf/applications/asset_tracker/

[deadpoolcode]

found, issue resolved

[sumusu]

Hi,

I also trying to get real GPS data.

But modification:

CONFIG_GPS_USE_SIM=y -> CONFIG_GPS=y

was not enough to make it work.

Could you kindly share how made it work?

I'm also using active antenna with nRF9160.

Thank you,

Kind regards,

Susumu

[Oivind Nielsen]

Hi, 

Try setting CONFIG_GPS_USE_SIM=n instead. 

That should disable simulated GPS data. 

[deadpoolcode]

thank you, issue is resolved with latest software versions. issue closed. 

[sumusu]

Unfortunately, it didn't work with me. I must try with latest SW (firmware?) version then.

Anyway, I want to thank to Oivind, he bother to answer my question.

Kind regards,

Susumu

[deadpoolcode]

you should use the NRF latest release tag, v1.0.0  did not work for me no matter what I did ...

[sumusu]

Thank you for your information!