802.15.4 and BLE multiprotocol requirement

[fgeldenh]

I have a requirement for BLE and 802.15.4 stacks in a multiprotocol environment. I have looked at the sample at NordicSemiconductor/nRF-IEEE-802.15.4-radio-driver on github.

I do however prefer to use one of the existing examples and found that the BLE and Zigbee Template Example looks like a  good starting point.

Am I correct in assuming that if I removed the references and dependencies to Zigbee from that project that i can use the template for my implementation.

Is the 802.15.4 library referenced by the project equivalent to the sample code within the github radio driver examples.

I have looked at the wireless uart example, but the state machine appears quite complex and I would prefer not to try and understand it.

Thank you

[Jørgen Holmefjord]

My apologies for the slow response from my side. I checked this with our developers and got the following feedback

In Single-Phy RAAL no such error should appear. In SoftDevice RAAL it is possible. I would expect a problem with missing SoC event handler. It's briefly described here:

https://github.com/NordicSemiconductor/nRF-IEEE-802.15.4-radio-driver/wiki/Multiprotocol-support :

This arbiter depends on SoC events from the SoftDevice. They have to be supplied to the driver using the nrf_raal_softdevice_soc_evt_handler function. For more information about reading SoC events, refer to the SVC call sd_evt_get.

Can you please check if you have implemented this correctly?