I am getting started with the nRF52840

[ramon]

I am following the "get started reference of nRF52840" 

https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52840-DK/GetStarted#infotabs

I cannot explore the nRF DK as removable drive 

In step 4, the bottoms SW1 to SW 4 which LED is pulsiting correct.

Help ?

Thanks

Raymond

[awneil]

ramon said:

I cannot explore the nRF DK as removable drive

What, exactly, do you mean by that?

Does the drive not appear at all?

Or what?

What is your development platform - Windows? Mac? Linux? - and version?

Are you sure you have the correct USB socket? There are two ...

Is it a brand new DK, or has someone else been using it before you ?

[ramon]

Hi, 

I cannot explore in the windows explorer the nRF DK as an USB drive.

I am using the correct socket, the DK is brand new.

I am using windows 10

the SW bottons do the correct ligthing (each botton flash the correct LED)

Thanks

Raymond

[awneil]

ramon said:

I cannot explore in the windows explorer the nRF DK as an USB drive.

that's no clearer!

Again, does the drive appear at all?

[ramon]

Not at all, nothing.

[awneil]

You could have said that in the first place!

Remember that we cannot see your screen, or what you are doing, or how you have things connected.

So: when you plug the DK into your PC, does it see any USB devices at all?

In Device Manager, do you see the COM port ?

[ramon]

I have nRF DK rigth connected.

When I plug the DK to my Pc windows, do not see any use device.

In device manager the com port is not working with DK (it works correctly with other devices)

Note: when I plug the DK in the USB port, LED 5 flashes papidly

Raymond

[awneil]

ramon said:

In device manager the com port is not working with DK (it works correctly with other devices)

That doesn't make sense

Do you get a COM port for the DK ?

How to capture Windows screenshots: https://devzone.nordicsemi.com/f/nordic-q-a/49995/twi-nrf52dk-ble/199526#199526

[Amanda Hsieh]

Hi Ramon, 

Please refer to this Setting up your toolchain to install tools.

ramon said:

When I plug the DK to my Pc windows, do not see any use device.

You have to install the SEGGER J-Link Software and Documentation Pack. 

-Amanda H. 

[awneil]

Amanda Hsieh said:

You have to install the SEGGER J-Link Software and Documentation Pack

Surely, the COM port and Removable Drive should appear without needing any Segger software installed?

It certainly isn't mentioned in the 'Get Started' page - which ramon is referring to:

[Jose Miguel]

Hello, the connection problem is already solved, it was just changing the cable, my question now is why in Linux I can't work on the board?